LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e LSZH

305M 4 pairs Unshielded twisted pair CU or CCA UTP CAT5 CAT5e Network Lan Box Cable LSZH jacket

UTP Cat5e LSZH is built as a 4 pair UTP CAT5e bare copper cable within the LANP CAT5e Cable range. The factory specification for this line reads: 305M 4 pairs Unshielded twisted pair CU or CCA UTP CAT5 CAT5e Network Lan Box Cable LSZH jacket.

It is supplied with a LSZH jacket, packed as 305 m, pull box. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper or CCA (copper-clad aluminium)
JacketLSZH
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

UTP Cat5e LSZH uses a bare copper conductor, so loop resistance stays where the cat5e cable specification says it should be instead of climbing with run length.

Unshielded Build

UTP Cat5e LSZH is UTP. Smaller bend radius, quicker to terminate, and no earthing path to get wrong at the patch panel.

LSZH Jacket Option

LSZH on UTP Cat5e LSZH is a life safety decision rather than a general upgrade. Specify it for stairwells, corridors and public buildings.

4 Pair Build

With 4 pair, UTP Cat5e LSZH leaves room for the device that gets added after handover — which is the normal case, not the exception.

OEM Branding Available

UTP Cat5e LSZH can ship as a private label line: logo printed on the jacket from 1 km, plus custom box artwork, reel labels and bag printing.

Tested Before It Ships

Every UTP Cat5e LSZH batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e LSZH. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e LSZH
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper or CCA (copper-clad aluminium)
Pairs4 pair
Jacket MaterialLSZH
Packaging305 m, pull box
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper or CCA (copper-clad aluminium)
  • Jacket: LSZH

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Pull UTP Cat5e LSZH at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Keep untwist length to the minimum the connector allows when terminating UTP Cat5e LSZH — it is the most common reason a field-terminated link fails while a factory cord on the same run passes.
  • Respect the bend radius on UTP Cat5e LSZH, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.

Before a first bulk order of UTP Cat5e LSZH: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e LSZH — Questions

Is UTP Cat5e LSZH bare copper or CCA?

Both builds exist for UTP Cat5e LSZH. The conductor is stated on the order confirmation and printed on the reel label, and we never substitute one for the other.

How is UTP Cat5e LSZH packed?

Standard packing for UTP Cat5e LSZH is 305 m, pull box; reel or coil length can change on a production run if your installers want a different unit.

Can you print our brand on UTP Cat5e LSZH?

Yes, from 1 km per specification. Below that UTP Cat5e LSZH ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for UTP Cat5e LSZH?

A trial reel of 100 m is enough to evaluate UTP Cat5e LSZH. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is UTP Cat5e LSZH covered by a compliance certificate?

Yes — the HKTC attestation covering our LAN cable range applies to UTP Cat5e LSZH. A copy is issued with the shipment.

Request pricing on UTP Cat5e LSZH

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue