LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e Dark-gray — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e Dark-gray

CAT5E PURE COPPER CCA 1000FT 305M UTP NETWORK ETHERNET CABLE BULK WIRE 24 AWG LAN Internet Lead

UTP Cat5e Dark-gray is built as a UTP CAT5e bare copper cable within the LANP CAT5e Cable range. The original specification reads: CAT5E PURE COPPER CCA 1000FT 305M UTP NETWORK ETHERNET CABLE BULK WIRE 24 AWG LAN Internet Lead.

It is supplied in Grey, packed as 305 m, 1000 ft. It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper or CCA (copper-clad aluminium)
Gauge24 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

UTP Cat5e Dark-gray uses a bare copper conductor, so loop resistance stays where the cat5e cable specification says it should be instead of climbing with run length.

Unshielded Build

UTP Cat5e Dark-gray is UTP. Smaller bend radius, quicker to terminate, and no earthing path to get wrong at the patch panel.

24 AWG Conductor

Conductor size on UTP Cat5e Dark-gray is 24 AWG, and it is verified by resistance measurement on every batch rather than taken from the extruder setting.

Grey Jacket

UTP Cat5e Dark-gray is catalogued in grey, which is how most sites keep this service separate from everything else sharing the same containment.

OEM Branding Available

From 1 km we print your brand on UTP Cat5e Dark-gray rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Testing on UTP Cat5e Dark-gray happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e Dark-gray. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e Dark-gray
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper or CCA (copper-clad aluminium)
Conductor Gauge24 AWG
Jacket ColourGrey
Packaging305 m, 1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper or CCA (copper-clad aluminium)

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Pull UTP Cat5e Dark-gray at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Terminate UTP Cat5e Dark-gray with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Keep UTP Cat5e Dark-gray off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.

Before a first bulk order of UTP Cat5e Dark-gray: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e Dark-gray — Questions

Is UTP Cat5e Dark-gray bare copper or CCA?

Either. UTP Cat5e Dark-gray runs in bare copper and in CCA, quoted separately, because the two behave very differently on a powered run.

How is UTP Cat5e Dark-gray packed?

Standard packing for UTP Cat5e Dark-gray is 305 m, 1000 ft; reel or coil length can change on a production run if your installers want a different unit.

Can UTP Cat5e Dark-gray be supplied in another jacket colour?

The stocked jacket on UTP Cat5e Dark-gray is grey. If your market uses a different identification code, set it with the order alongside the print text.

What is the minimum order and lead time for UTP Cat5e Dark-gray?

UTP Cat5e Dark-gray starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

Is UTP Cat5e Dark-gray covered by a compliance certificate?

UTP Cat5e Dark-gray falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on UTP Cat5e Dark-gray

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue