LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e Blue — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e Blue

1,000ft Bulk Cat5e Twisted Pair Ethernet Cable 24 AWG UTP Pull Box Cat 5e Bare Copper Wire Data Network Installations Internet

UTP Cat5e Blue sits in the LANP CAT5e Cable range as a UTP CAT5e bare copper build. As catalogued by the factory: 1,000ft Bulk Cat5e Twisted Pair Ethernet Cable 24 AWG UTP Pull Box Cat 5e Bare Copper Wire Data Network Installations Internet.

It is supplied in Blue, packed as 1000 ft, pull box. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper
Gauge24 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

The conductor in UTP Cat5e Blue is bare copper, not copper-clad aluminium. On a long run that shows up as voltage still present at the far termination rather than lost in the cable.

Unshielded Build

UTP Cat5e Blue is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

24 AWG Conductor

At 24 AWG, the conductor in UTP Cat5e Blue is checked against the specification on each production lot before the drum is packed.

Blue Jacket

The blue jacket on UTP Cat5e Blue is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

OEM Branding Available

OEM on UTP Cat5e Blue means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Every UTP Cat5e Blue batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e Blue. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e Blue
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper
Conductor Gauge24 AWG
Jacket ColourBlue
Packaging1000 ft, pull box
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Pull UTP Cat5e Blue at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Every millimetre of untwisted conductor at a UTP Cat5e Blue termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Respect the bend radius on UTP Cat5e Blue, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.

Before a first bulk order of UTP Cat5e Blue: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e Blue — Questions

Is the conductor in UTP Cat5e Blue really bare copper?

Yes — bare copper throughout. Strip a core from any UTP Cat5e Blue drum and the cut end is copper all the way through, with no aluminium centre.

How is UTP Cat5e Blue packed?

The stocked format is 1000 ft, pull box. Custom reel and coil lengths run on production orders — send the length schedule with the enquiry.

Can UTP Cat5e Blue be supplied in another jacket colour?

UTP Cat5e Blue is catalogued in blue. Other colours run on production orders, and colour is normally decided at the same time as the jacket print text.

What is the minimum order and lead time for UTP Cat5e Blue?

UTP Cat5e Blue is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Is UTP Cat5e Blue covered by a compliance certificate?

Yes — the HKTC attestation covering our LAN cable range applies to UTP Cat5e Blue. A copy is issued with the shipment.

Request pricing on UTP Cat5e Blue

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue