LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat5e Patch Cord 5M — Cat5e Patch Cord manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Patch Cord

Cat5e Patch Cord 5M

Cat5e Ethernet Cable RJ45 Network Lan UTP Patch Cord Grey 26AWG 5m for Router, Modem, PS4/5, Xbox

This is the UTP CAT5e specification in the LANP CAT5e Patch Cord range. As catalogued by the factory: Cat5e Ethernet Cable RJ45 Network Lan UTP Patch Cord Grey 26AWG 5m for Router, Modem, PS4/5, Xbox.

It is supplied in Grey. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Patch Cord
ShieldingUTP
Gauge26 AWG
ColourGrey
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Unshielded Build

The UTP construction of Cat5e Patch Cord 5M keeps containment fill and termination time down. Screening only pays where you can name the interference source.

26 AWG Conductor

Cat5e Patch Cord 5M runs a 26 AWG conductor. Gauge is the figure that decides PoE reach and heat rise in a full bundle, so it is measured, not assumed.

Grey Jacket

The grey jacket on Cat5e Patch Cord 5M is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

Packed As You Handle It

5 m is the stocked format for Cat5e Patch Cord 5M; tell us how it will be handled and we will match the packing to it.

OEM Branding Available

OEM on Cat5e Patch Cord 5M means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Every Cat5e Patch Cord 5M batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for Cat5e Patch Cord 5M. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat5e Patch Cord 5M
CategoryCAT5e Patch Cord
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Gauge26 AWG
Jacket ColourGrey
ConnectorRJ45 8P8C, gold-plated contacts
Cord Length5 m
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Hotels, schools and retail estates patching at volume
  • IT resellers bundling cords with hardware
  • Integrators fitting out desks and meeting rooms
  • Distributors stocking a full colour and length matrix

Problems It Solves

  • Cords that fail within months of daily re-patching
  • Length variation making rack tidiness impossible
  • CCA supplied where bare copper was specified
  • No test evidence supplied with a bulk order

Application Scenarios

  • Desk patching in offices and classrooms
  • Hotel room data points
  • IP phone and access point connections
  • Bundled accessories shipped with networking hardware
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Fluke DSX channel certification on every lot
  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
Cat5e Patch Cord 10MSame cord specification in a different length — 5 m against 10 m. Ordering the right length per position is what keeps a patch field manageable.
Cat5e Patch Cord 15MSame cord specification in a different length — 5 m against 15 m. Ordering the right length per position is what keeps a patch field manageable.
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on Cat5e Patch Cord 5M rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Keep untwist length to the minimum the connector allows when terminating Cat5e Patch Cord 5M — it is the most common reason a field-terminated link fails while a factory cord on the same run passes.
  • Keep Cat5e Patch Cord 5M off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.

Before a first bulk order of Cat5e Patch Cord 5M: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Patch Cord Range

See all 10 cat5e patch cord products →

Cat5e Patch CordCat5e Patch Cord 10M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 10M

8P8C RJ45 UTP Cat5e Cat5 Patch Cord Cable for Modem Router Cable Ethernet 1-30m for Router,…

UTP8 core
View specification →
Cat5e Patch CordCat5e Patch Cord 15M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 15M

CAT5E UTP Ethernet Cable Network Wire RJ45 Cat5e Patch Cord CCA for Router, Modem, switch

UTP15 m
View specification →
Cat5e Patch CordCat5e Patch Cord 1M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 1M

cat5e lan cable patch cord ethernet network cable For Computer,Printer,Laptop

1 m
View specification →
Cat5e Patch CordCat5e Patch Cord 20M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 20M

20m Ethernet Cable Category 5e Internet RJ45 Network LAN UTP Patch Cord Cat5e for Router,…

UTP20 m
View specification →

Related guides

Where it is installed

Questions

Cat5e Patch Cord 5M — Questions

How is Cat5e Patch Cord 5M packed?

The stocked format is 5 m. Custom reel and coil lengths run on production orders — send the length schedule with the enquiry.

Can Cat5e Patch Cord 5M be supplied in another jacket colour?

Cat5e Patch Cord 5M is catalogued in grey. Other colours run on production orders, and colour is normally decided at the same time as the jacket print text.

What is the minimum order and lead time for Cat5e Patch Cord 5M?

Cat5e Patch Cord 5M starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

Is Cat5e Patch Cord 5M covered by a compliance certificate?

Cat5e Patch Cord 5M falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on Cat5e Patch Cord 5M

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue