LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat5e Patch Cord 1M — Cat5e Patch Cord manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Patch Cord

Cat5e Patch Cord 1M

cat5e lan cable patch cord ethernet network cable For Computer,Printer,Laptop

This is the CAT5e specification in the LANP CAT5e Patch Cord range. The original specification reads: cat5e lan cable patch cord ethernet network cable For Computer,Printer,Laptop.

MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Patch Cord
Length1 m
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Packed As You Handle It

Cat5e Patch Cord 1M ships as 1 m, so the format matches how the cable is actually handled on site rather than how it is easiest to wind.

OEM Branding Available

OEM on Cat5e Patch Cord 1M means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

Every Cat5e Patch Cord 1M batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for Cat5e Patch Cord 1M. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat5e Patch Cord 1M
CategoryCAT5e Patch Cord
Cable ClassCAT5e
Cord Length1 m
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Hotels, schools and retail estates patching at volume
  • IT resellers bundling cords with hardware
  • Integrators fitting out desks and meeting rooms
  • Distributors stocking a full colour and length matrix

Problems It Solves

  • Cords that fail within months of daily re-patching
  • Length variation making rack tidiness impossible
  • CCA supplied where bare copper was specified
  • No test evidence supplied with a bulk order

Application Scenarios

  • Desk patching in offices and classrooms
  • Hotel room data points
  • IP phone and access point connections
  • Bundled accessories shipped with networking hardware
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Fluke DSX channel certification on every lot
  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
Cat5e Patch Cord 10MSame cord specification in a different length — 1 m against 10 m. Ordering the right length per position is what keeps a patch field manageable.
Cat5e Patch Cord 15MSame cord specification in a different length — 1 m against 15 m. Ordering the right length per position is what keeps a patch field manageable.
Use Guide

Installing It Without Losing Performance

  • Pull Cat5e Patch Cord 1M at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Terminate Cat5e Patch Cord 1M with the twist maintained as close to the contact as possible. This single habit accounts for most first-time certification passes.
  • Keep Cat5e Patch Cord 1M off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.

Before a first bulk order of Cat5e Patch Cord 1M: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Patch Cord Range

See all 10 cat5e patch cord products →

Cat5e Patch CordCat5e Patch Cord 10M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 10M

8P8C RJ45 UTP Cat5e Cat5 Patch Cord Cable for Modem Router Cable Ethernet 1-30m for Router,…

UTP8 core
View specification →
Cat5e Patch CordCat5e Patch Cord 15M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 15M

CAT5E UTP Ethernet Cable Network Wire RJ45 Cat5e Patch Cord CCA for Router, Modem, switch

UTP15 m
View specification →
Cat5e Patch CordCat5e Patch Cord 20M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 20M

20m Ethernet Cable Category 5e Internet RJ45 Network LAN UTP Patch Cord Cat5e for Router,…

UTP20 m
View specification →
Cat5e Patch CordCat5e Patch Cord 25M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 25M

Ethernet Network Cable Lead 24AWG Gigabit Internet UTP Cat5e RJ45-RJ45 Network Cable Patch Cord

UTP24 AWG
View specification →

Related guides

Where it is installed

Questions

Cat5e Patch Cord 1M — Questions

How is Cat5e Patch Cord 1M packed?

The stocked format is 1 m. Custom reel and coil lengths run on production orders — send the length schedule with the enquiry.

Can you print our brand on Cat5e Patch Cord 1M?

Yes, from 1 km per specification. Below that Cat5e Patch Cord 1M ships with neutral print and your branding goes on the box and reel label.

What is the minimum order and lead time for Cat5e Patch Cord 1M?

A trial reel of 100 m is enough to evaluate Cat5e Patch Cord 1M. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is Cat5e Patch Cord 1M covered by a compliance certificate?

Cat5e Patch Cord 1M falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on Cat5e Patch Cord 1M

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue