LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e Outdoor — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e Outdoor

Cable CAT5e 1000ft OUTDOOR Black Data LAN Network Cable Underground PE BLACK SOLID COPPER Internet

This is the UTP CAT5e solid bare copper specification in the LANP CAT5e Cable range, specified for external runs. The original specification reads: Cable CAT5e 1000ft OUTDOOR Black Data LAN Network Cable Underground PE BLACK SOLID COPPER Internet.

It is supplied with a PE jacket, in Black, packed as 1000 ft. It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper
JacketPE
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

Bare copper is what UTP Cat5e Outdoor is built on, which is why it holds its resistance figure across the full drum instead of only at the start of it.

Unshielded Build

The UTP construction of UTP Cat5e Outdoor keeps containment fill and termination time down. Screening only pays where you can name the interference source.

Built For External Routes

UTP Cat5e Outdoor is the outdoor specification. Use it for duct, aerial and exposed runs where an indoor jacket would fail within a couple of seasons.

Black Jacket

The black jacket on UTP Cat5e Outdoor is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

OEM Branding Available

From 1 km we print your brand on UTP Cat5e Outdoor rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Every UTP Cat5e Outdoor batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e Outdoor. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e Outdoor
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper
Conductor StructureSolid
Jacket MaterialPE
Jacket ColourBlack
InstallationOutdoor
Packaging1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Solid conductor
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper
  • Jacket: PE

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Do not force UTP Cat5e Outdoor through a route. Stretching the conductors changes the twist geometry permanently, and the damage is invisible until the tester finds it.
  • Every millimetre of untwisted conductor at a UTP Cat5e Outdoor termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Respect the bend radius on UTP Cat5e Outdoor, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.
  • Where UTP Cat5e Outdoor enters a structure, seal it. Water follows the jacket, and it only has to do it once.

Before a first bulk order of UTP Cat5e Outdoor: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e Outdoor — Questions

Is the conductor in UTP Cat5e Outdoor really bare copper?

Yes — bare copper throughout. Strip a core from any UTP Cat5e Outdoor drum and the cut end is copper all the way through, with no aluminium centre.

How is UTP Cat5e Outdoor packed?

Standard packing for UTP Cat5e Outdoor is 1000 ft; reel or coil length can change on a production run if your installers want a different unit.

Can UTP Cat5e Outdoor be supplied in another jacket colour?

The stocked jacket on UTP Cat5e Outdoor is black. If your market uses a different identification code, set it with the order alongside the print text.

What is the minimum order and lead time for UTP Cat5e Outdoor?

A trial reel of 100 m is enough to evaluate UTP Cat5e Outdoor. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is UTP Cat5e Outdoor covered by a compliance certificate?

UTP Cat5e Outdoor falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on UTP Cat5e Outdoor

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue