Dome Camera
Ceiling Mount Dome With a 4 Pin Aviation Connector
- Screw locked 4 pin connector will not vibrate loose
- Dome shell conceals the exact lens direction
- Infrared ring for unlit cabins and cargo areas
Product Overview
Dome Camera at a Glance
A ceiling mount dome camera for a cabin, a cargo area or a passenger compartment, with an infrared LED ring around the lens and a screw lock 4 pin aviation connector on the tail. The dome shell hides the lens direction, which is why it is the usual choice for passenger facing interior views.
The 4 pin aviation connector is the connector standard used across commercial vehicle systems: it carries video and power on one screw locked plug that will not shake loose on a rough road.
Key Benefits
Why Buyers Specify This Model
Screw locked 4 pin connector will not vibrate loose
Dome shell conceals the exact lens direction
Infrared ring for unlit cabins and cargo areas
Low profile base that sits close to a headliner
Application and Fit
Where It Is Used and Who It Is For
Application Scenarios
- Bus and coach saloons
- Van cargo areas
- Truck cabins
- Passenger compartments
Who It Is For
- Bus and coach builders
- Fleet workshops
- Security integrators
- Distributors
Problems It Solves
- Connectors that shake loose on rough roads
- Nothing visible in an unlit cargo bay
- Interior cameras that look intrusive to passengers
- Headliner clearance limits
Technical Features
Technical Features
- Housing designed around a specific mounting position rather than a universal bracket
- Sealed construction, with the sealed camera range certified to IP68
- Supplied with the termination your head end needs, 4 pin aviation or RCA
- Cable length made to the routed distance on your vehicle, not a fixed standard length
- Housing colour, labelling and packaging available under your own brand
Specifications
Configuration and Specification Sheet
| Housing | Dome shell on a fixed base |
|---|---|
| Mounting | Ceiling or bulkhead, three point base |
| Night vision | Infrared LED ring |
| Connector | 4 pin aviation, screw locking |
Full electrical specification is issued per order. Sensor, resolution, lens angle, supply voltage, cable length and connector on this model are confirmed against your vehicle and your head end before production, because they are the parameters most often changed on an OEM order. Ask for the specification sheet and we will send it with the quotation.
Materials
Materials and Construction
Camera bodies in the range use metal and moulded composite housings depending on the mounting position, with a compressed gasket at the lens cover and a strain relieved cable gland at the tail. The sealed camera range is certified to IP68. Exact housing material for a given model is confirmed on the specification sheet before an order is placed.
Manufacturing Process
How It Is Made
Manufactured at our Guangzhou facility. Specification is fixed first, a physical sample is built and approved, components are sourced against the approved sample, the unit is assembled and sealed, then function checked and packed. Production is carried out strictly in accordance with the ISO9001 standard.
Quality Control
Quality Control Steps
- Incoming component check against the approved sample specification
- Assembly with gasket compression and cable gland made off on sealed housings
- Power up and image output check on every unit
- Infrared or assist lamp function check where the model has them
- Final visual and packaging check before carton packing
Certifications
Certifications Held on the Range
- ISO9001
- IP68
- CE
- FCC
- RoHS
- E-mark
Certificates apply to specific models and test reports. Ask for the certificate covering the exact model you are ordering rather than a general company document.
Customization
Customization Options
- Housing colour and surface finish
- Cable length made to the routed distance on your vehicle
- Connector type, 4 pin aviation or RCA, or to your drawing
- Label and silkscreen artwork under your own brand
- Retail box, inner packing and printed manual
- Carton marking and quantity per carton
Comparison
Compared With Other Products in the Range
| Dome Camera | Mini Dome Camera | Backup Camera | |
|---|---|---|---|
| Range | Vehicle Cameras | Vehicle Cameras | Vehicle Cameras |
| Built for | Ceiling Mount Dome With a 4 Pin Aviation Connector | Compact Interior Dome With RCA and DC Leads | Heavy Duty Bracket Camera for Trucks Trailers and Machines |
| Primary application | Bus and coach saloons | Van interiors | Rigid trucks and box bodies |
| Main advantage | Screw locked 4 pin connector will not vibrate loose | RCA tail plugs straight into aftermarket monitors and recorders | Bracket mounting means no hole saw work on the vehicle body |
If you are unsure which of these fits your vehicle, send a photo of the mounting position and we will tell you which one to order.
Use Guide
Installation and Use Guide
A short fitting sequence. The full installation guide is available in the Download Center.
- 01
Confirm the Mounting Position
Hold the dome camera where it will be fitted and confirm the view or the screen position works before anything is drilled or fixed.
- 02
Check the Cable Reaches
Route the full cable from the unit to the head end and confirm it reaches with slack to spare, away from exhaust heat and moving parts.
- 03
Fix the Unit
Fit the bracket, collar or stand and seal any panel entry point. Leave a drip loop below an exterior entry so water runs away from the hole.
- 04
Connect Power and Video
Make the video and power connections in dry positions, supported so no joint carries the weight of the loom.
- 05
Set and Test
Power up, set the angle or the screen position from the driver's seat, and test again after dark and with the vehicle wet.
Knowledge
Related Guides
Downloads
Documents for This Product
Explore
Related Products
Vehicle CamerasMini Dome CameraCompact Interior Dome With RCA and DC Leads
View Product
Vehicle CamerasBackup CameraHeavy Duty Bracket Camera for Trucks Trailers and Machines
View Product
Vehicle Monitors7 Inch Vehicle Monitor7 Inch Commercial Vehicle Display for Multi Camera Systems
View Product
Vehicle CamerasSide CameraWedge Housing Camera for Corner and Kerb Side Views
View ProductFAQ
Dome Camera FAQ
What is the MOQ on the Dome Camera?
MOQ varies by model and by how much customisation the order carries. Send your quantity and destination market and we will confirm the MOQ in writing with the quotation.
Can this product be supplied under our own brand?
Yes. OEM and ODM service covers housing colour, cable and connector specification, label artwork, printed manual and retail packaging.
Which certificates cover this product?
Our product range holds IP68, CE, FCC, RoHS and E-mark certificates, and production is carried out strictly in accordance with the ISO9001 standard. Ask for the certificate covering this exact model before shipping.
How is it packed and shipped?
Carton packing, with retail boxes and inner packing where the order calls for them. Shipment by express, air, land or sea, with sea shipments loading at Shenzhen or Guangzhou.
Can I get a sample before placing a production order?
Yes. Samples are dispatched for physical approval before production. Ask for a sample through WhatsApp or email and we will confirm the cost and the lead time.
Do you have a CAD file or drawing available?
CAD files are not published for download. Request a CAD file or a dimensioned drawing through WhatsApp or email and we will send it directly once the application is confirmed.
Next Step
Get a Quotation on the Dome Camera
Send your quantity, destination market and any customisation you need. We will come back with price, MOQ and lead time.