Mini Dome Camera
Compact Interior Dome With RCA and DC Leads
- RCA tail plugs straight into aftermarket monitors and recorders
- Lower profile than the full size dome
- Infrared ring for interior use with no cabin light
Product Overview
Mini Dome Camera at a Glance
A reduced size dome camera on a compact base, tailed with a standard RCA video plug and a DC power lead. It is the direct fit for aftermarket monitors and recorders that expect RCA rather than an aviation connector.
Fleet and van customers use it where the full size dome is too tall for the headliner, or where the head end is a consumer monitor with phono inputs.
Key Benefits
Why Buyers Specify This Model
RCA tail plugs straight into aftermarket monitors and recorders
Lower profile than the full size dome
Infrared ring for interior use with no cabin light
Simple two lead termination that any installer can extend
Application and Fit
Where It Is Used and Who It Is For
Application Scenarios
- Van interiors
- Minibus saloons
- Taxi and ride hail cabins
- Service vehicle load areas
Who It Is For
- Installers
- Fleet workshops
- Accessory retailers
- Distributors
Problems It Solves
- Headliner clearance too tight for a full dome
- Head units that only accept RCA
- Interiors with no light at night
- Terminations installers cannot extend
Technical Features
Technical Features
- Housing designed around a specific mounting position rather than a universal bracket
- Sealed construction, with the sealed camera range certified to IP68
- Supplied with the termination your head end needs, 4 pin aviation or RCA
- Cable length made to the routed distance on your vehicle, not a fixed standard length
- Housing colour, labelling and packaging available under your own brand
Specifications
Configuration and Specification Sheet
| Housing | Compact dome shell |
|---|---|
| Mounting | Compact base, ceiling or bulkhead |
| Night vision | Infrared LED ring |
| Connector | RCA video plug and DC power lead |
Full electrical specification is issued per order. Sensor, resolution, lens angle, supply voltage, cable length and connector on this model are confirmed against your vehicle and your head end before production, because they are the parameters most often changed on an OEM order. Ask for the specification sheet and we will send it with the quotation.
Materials
Materials and Construction
Camera bodies in the range use metal and moulded composite housings depending on the mounting position, with a compressed gasket at the lens cover and a strain relieved cable gland at the tail. The sealed camera range is certified to IP68. Exact housing material for a given model is confirmed on the specification sheet before an order is placed.
Manufacturing Process
How It Is Made
Manufactured at our Guangzhou facility. Specification is fixed first, a physical sample is built and approved, components are sourced against the approved sample, the unit is assembled and sealed, then function checked and packed. Production is carried out strictly in accordance with the ISO9001 standard.
Quality Control
Quality Control Steps
- Incoming component check against the approved sample specification
- Assembly with gasket compression and cable gland made off on sealed housings
- Power up and image output check on every unit
- Infrared or assist lamp function check where the model has them
- Final visual and packaging check before carton packing
Certifications
Certifications Held on the Range
- ISO9001
- IP68
- CE
- FCC
- RoHS
- E-mark
Certificates apply to specific models and test reports. Ask for the certificate covering the exact model you are ordering rather than a general company document.
Customization
Customization Options
- Housing colour and surface finish
- Cable length made to the routed distance on your vehicle
- Connector type, 4 pin aviation or RCA, or to your drawing
- Label and silkscreen artwork under your own brand
- Retail box, inner packing and printed manual
- Carton marking and quantity per carton
Comparison
Compared With Other Products in the Range
| Mini Dome Camera | Dome Camera | Mini Backup Camera | |
|---|---|---|---|
| Range | Vehicle Cameras | Vehicle Cameras | Vehicle Cameras |
| Built for | Compact Interior Dome With RCA and DC Leads | Ceiling Mount Dome With a 4 Pin Aviation Connector | Compact Bracket Camera With Four Assist Lamps |
| Primary application | Van interiors | Bus and coach saloons | Passenger cars |
| Main advantage | RCA tail plugs straight into aftermarket monitors and recorders | Screw locked 4 pin connector will not vibrate loose | Small enough for a number plate lip or a tailgate recess |
If you are unsure which of these fits your vehicle, send a photo of the mounting position and we will tell you which one to order.
Use Guide
Installation and Use Guide
A short fitting sequence. The full installation guide is available in the Download Center.
- 01
Confirm the Mounting Position
Hold the mini dome camera where it will be fitted and confirm the view or the screen position works before anything is drilled or fixed.
- 02
Check the Cable Reaches
Route the full cable from the unit to the head end and confirm it reaches with slack to spare, away from exhaust heat and moving parts.
- 03
Fix the Unit
Fit the bracket, collar or stand and seal any panel entry point. Leave a drip loop below an exterior entry so water runs away from the hole.
- 04
Connect Power and Video
Make the video and power connections in dry positions, supported so no joint carries the weight of the loom.
- 05
Set and Test
Power up, set the angle or the screen position from the driver's seat, and test again after dark and with the vehicle wet.
Knowledge
Related Guides
Downloads
Documents for This Product
Explore
Related Products
Vehicle CamerasDome CameraCeiling Mount Dome With a 4 Pin Aviation Connector
View Product
Vehicle CamerasMini Backup CameraCompact Bracket Camera With Four Assist Lamps
View Product
Vehicle Monitors4.3 Inch Stand Alone MonitorCompact Pedestal Monitor for a Fixed Dash Position
View Product
Dash CamerasVehicle BlackboxTouchscreen Recorder With an On Screen Menu
View ProductFAQ
Mini Dome Camera FAQ
What is the MOQ on the Mini Dome Camera?
MOQ varies by model and by how much customisation the order carries. Send your quantity and destination market and we will confirm the MOQ in writing with the quotation.
Can this product be supplied under our own brand?
Yes. OEM and ODM service covers housing colour, cable and connector specification, label artwork, printed manual and retail packaging.
Which certificates cover this product?
Our product range holds IP68, CE, FCC, RoHS and E-mark certificates, and production is carried out strictly in accordance with the ISO9001 standard. Ask for the certificate covering this exact model before shipping.
How is it packed and shipped?
Carton packing, with retail boxes and inner packing where the order calls for them. Shipment by express, air, land or sea, with sea shipments loading at Shenzhen or Guangzhou.
Can I get a sample before placing a production order?
Yes. Samples are dispatched for physical approval before production. Ask for a sample through WhatsApp or email and we will confirm the cost and the lead time.
Do you have a CAD file or drawing available?
CAD files are not published for download. Request a CAD file or a dimensioned drawing through WhatsApp or email and we will send it directly once the application is confirmed.
Next Step
Get a Quotation on the Mini Dome Camera
Send your quantity, destination market and any customisation you need. We will come back with price, MOQ and lead time.