STS1B
STS1B is a stock men's hair system built on a full thin skin poly base with a 2 inch NPU strip at the back and a V-loop front. The thin skin base provides a seamless scalp look that blends well with natural hairlines, especially under bright light or on camera. The V-loop front strengthens the hairline and reduces knot visibility. It ships in 8 by 10 inch base size with 6 inch Indian Remy hair at roughly 110% density, and leaves the workshop within 24 hours because it is held in stock.
Key Benefits
- Full thin skin poly base gives a seamless, natural scalp appearance
- V-loop front construction strengthens the hairline and reduces knot visibility
- 2 inch NPU strip at the back provides a smooth surface for tape or glue attachment
- Indian Remy hair with aligned cuticles resists tangling and matting
- Stock item dispatched within 24 hours instead of waiting on a custom build
- 6 inch hair at 110% density allows for multiple styling options without exposing the base
Problems It Solves
- Visible dark knots at the hairline that give away the base under direct light
- Lace fronts that shed knots and thin out at the front within a few months
- Full skin bases that seal the scalp and feel hot through a working day
- Rear tape edges lifting because there is no smooth surface to bond to
- Long custom lead times when a wearer needs a replacement unit now
Who It Is For
- Men with front to mid crown hair loss who want a non-surgical everyday solution with a natural front
- Wearers who prioritize a seamless scalp look over breathability
- Hair replacement studios needing a repeatable stock unit with a strong hairline
- Barbers who need a system with a clean, flat rear edge for tape attachment
- Wholesale buyers building a starter range with a high-realism base type
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen close up
- Wearers who need a natural-looking front that blends under bright light or on camera
- Salons fitting a client who wants a low-profile, seamless look without a lace front
- Hair replacement studios offering a stock unit with a high realism front for walk-in clients
- Distributors stocking a high-realism base type between lace and mono for a broad range
Technical Features
- Full thin skin poly base across the entire unit, not only the crown
- 2 inch NPU strip at the back for tape or glue attachment
- V-loop front construction for hairline strength and knot concealment
- Indian Remy hair with cuticles aligned in one direction
- 3.0 cm curl and wave setting supplied as standard
- Front knots are not bleached, but the V-loop reduces knot visibility
Specifications
| Model | STS1B |
|---|---|
| Base Type | Full thin skin poly with 2 inch NPU back and V-loop front |
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Hair Colour | Many colours available including grey blend codes |
| Dispatch | Sent in 24 hours |
| Returns | 30 days on unused uncut un-recoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- Thin skin poly base material
- NPU polyurethane strip at the rear perimeter
- V-loop front construction for hairline strength
How It Is Made
- Base is cut and shaped to the 8 by 10 inch template
- NPU strip is bonded across the 2 inch rear section
- Hair is ventilated into the thin skin base by hand
- V-loop front is constructed to reduce knot visibility
- Hair is set to a 3.0 cm curl and steamed
- Unit is washed, dried and packed for dispatch
Quality Checks Before Dispatch
- Density checked against the 110% target across front mid and crown
- Hairline inspected under light for knot visibility after V-loop construction
- Base size measured against the 8 by 10 inch spec before packing
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your template
- Hair length ordered longer or shorter than the stock 6 inches
- Density raised or lowered from the standard 110%
- Colour selected from the full code range including grey percentage blends
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to lace front or full mono if durability or breathability matters more
How It Compares
| Full Swiss or French lace hair system | STS1B has a more seamless scalp look but breathes less than full lace |
| Full fine welded mono system | STS1B is more seamless and thinner but may not hold knots as long under daily wear |
| Custom made thin skin unit | STS1B ships in 24 hours from stock while a custom build is made to your own template and colour |
Use And Care Guide
- Make a template of your own scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the rear
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol based products on the knots
- Clean adhesive residue from the NPU after each removal to keep the bond strong
Other Units Buyers Compare With This
Questions About This Unit
How long does a thin skin poly system last compared with lace?
Thin skin holds knots longer than lace under daily wear but is less breathable. Actual life depends on how often you wash, style and re-attach it.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size for STS1B. Send us your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The V-loop front reduces knot visibility and the thin skin base blends well with natural hairlines. A lace front is thinner still if an undetectable front is your first priority.
How fast is dispatch and delivery?
STS1B is a stock unit and is sent within 24 hours. Transit is normally about 5 to 10 days depending on destination.
Can I return it if the colour is wrong?
There is a 30 day return window on units that have not been used, cut or re-coloured. Once a unit is cut in or recoloured it can no longer be returned.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through light browns and 613#, including grey blend codes such as 1B10#, 1B30# and 1B65#.
Ask About STS1B
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.