Walker Signature Long Hold Time Wig and Toupee's Tape
Walker Signature Long Hold Time Tape is a thin, clear adhesive tape designed for securing hair systems and toupees, with a hold time of up to 10 days depending on environmental conditions and individual body chemistry. It is made for sensitive skin and leaves minimal residue after removal. The tape has a red liner that becomes transparent when applied, and it is stiff in carrier type, which helps it maintain shape during application. It is suitable for poly bases and is recommended for use on human hair wigs and extensions. The tape is part of a range that includes longer-lasting options, with this version being the thinnest on the market at 6.5 mils, significantly thinner than standard 4+ week hold tapes which are typically 10-11 mils thick.
Key Benefits
- Up to 10 days of hold time under normal conditions
- Extremely thin at 6.5 mils, reducing visibility under hair
- Low residue after removal, easy to clean up
- Hypoallergenic and skin-safe for sensitive users
- Stiff carrier maintains shape during application
- Clear finish with red liner that becomes invisible when applied
Problems It Solves
- Tape that leaves sticky residue after removal
- Thick tapes that show under hair or feel bulky
- Adhesives that irritate sensitive skin
- Short hold times requiring daily reattachment
- Lack of clean removal on poly-based systems
- Invisible hold that fails under humidity or heat
Who It Is For
- Men and women with hair systems or toupees who want a long-lasting, low-visibility tape
- Hair replacement studios and stylists fitting clients with poly or lace units
- Salons using tape for tape-in extensions or temporary hair systems
- Wearers with sensitive skin who need a hypoallergenic adhesive
- Wholesale buyers stocking a high-performance tape for their clients
Where It Is Worn
- Daily wear for individuals who need a secure hold without frequent reattachment
- Salons applying tape to multiple clients with varying skin sensitivities
- Wearers with poly-based hair systems needing a clean, strong bond
- Clients who prefer not to use liquid adhesives due to skin irritation
- Use on long or short wigs where a clean, invisible hold is needed
- Hair replacement studios needing a reliable, easy-to-use tape for walk-in fittings
Technical Features
- Clear adhesive with red liner that becomes transparent when applied
- 6.5 mils thickness, thinner than most 4+ week hold tapes
- Stiff carrier for shape retention during application
- Hypoallergenic and skin-safe formulation
- Low residue after removal
- Shiny finish on the adhesive surface
- Designed for poly bases and human hair systems
Specifications
| Model | Walker Signature Long Hold Time Tape |
|---|---|
| Thickness | 6.5 mils |
| Hold Time | Up to 10 days |
| Liner | Red |
| Adhesive Finish | Clear |
| Carrier Type | Stiff |
| Residue | Low |
| Gentleness | Hypoallergenic |
| Dullness | Shiny |
| Base Compatibility | Poly, human hair systems |
| Application Type | Tape for hair systems and toupees |
Materials
- Clear adhesive layer
- Red liner material
- Stiff carrier film
- Hypoallergenic adhesive formulation
How It Is Made
- Adhesive is coated onto the stiff carrier film
- Red liner is applied to protect the adhesive before use
- Tape is cut to size before application
- Liner is peeled off and tape is applied to the base of the hair system
- Tape is pressed into place to ensure full contact
- After removal, residue is cleaned with a gentle cleanser
Quality Checks Before Dispatch
- Thickness measured at 6.5 mils across the roll
- Adhesive strength tested under varying humidity and temperature
- Residue check after removal on multiple test units
- Skin safety tested for irritation on sensitive skin
- Visual inspection for uniformity and clarity of the adhesive layer
Customisation Options
- Available in standard roll sizes for immediate use
- Can be cut to custom lengths for specific base sizes
- Not available in different colours or thicknesses beyond the 6.5 mil standard
- No custom packaging or branding options listed
How It Compares
| Standard 4+ week hold tapes (10-11 mils) | Walker Signature is thinner at 6.5 mils, less visible under hair, but may be slightly less durable on very high-friction areas |
| Liquid adhesives | Tape is easier to apply and remove with less residue, but liquid adhesives may offer stronger hold on very thin bases |
| Lace front units with tape | Tape is not recommended for lace frontals due to shine and potential damage to delicate lace |
Use And Care Guide
- Peel off the red liner before applying the tape to the base
- Cut the tape to match the base perimeter, avoiding excess material
- Apply the tape to the base with firm pressure, ensuring full contact
- Press the hair system onto the scalp and hold for 10 seconds to set
- Remove tape by peeling from the edge and clean residue with a gentle cleanser
- Avoid using alcohol-based products on the tape area to prevent weakening
Questions About This Unit
How long does the tape last?
Up to 10 days depending on temperature, humidity, and body oils. Actual duration varies by individual and environment.
Is it safe for sensitive skin?
Yes, it is hypoallergenic and skin-safe. A patch test is recommended for first-time users.
Can I use it on lace front units?
No, the shiny finish may show through lace and damage the delicate material. It is best suited for poly or solid base systems.
How do I remove it without residue?
The tape is low residue by design. Clean any remaining marks with a gentle wig cleanser or adhesive remover.
Is it suitable for human hair wigs?
Yes, it works well on both short and long human hair wigs, especially on poly-based systems.
Can I cut it to size?
Yes, it can be cut to match your base size or shape before application.
Do you supply to salons and distributors?
Yes. Contact us via WhatsApp or email with your order volume and we will provide a wholesale quote.
Ask About Walker Signature Long Hold Time Wig and Toupee's Tape
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.