Hairpieces for Men
Hairpieces for Men is a stock men's hair system built on a full French lace base with a 2 inch NPU strip across the back and a double mono net at the front. The French lace front provides a natural-looking hairline that blends well with the scalp, especially in bright light, while the NPU strip at the rear offers a stable surface for tape or glue attachment. The unit ships in 8 by 10 inch base size with 6 inch Indian Remy hair at roughly 110% density and leaves the workshop within 24 hours because it is held in stock.
Key Benefits
- Full French lace front gives a natural hairline that reads as scalp under direct light
- NPU back strip provides a flat, smooth surface for tape or glue attachment
- Double mono net at the front strengthens the hairline and reduces knot visibility
- Breathable lace base allows airflow and reduces trapped heat during daily wear
- Stock item dispatched within 24 hours instead of waiting on a custom build
- 6 inch hair at 110% density can be styled, parted and cut without exposing the base
Problems It Solves
- Lace perimeters that shed knots and thin out at the front within a few months
- Full skin bases that seal the scalp and feel hot through a working day
- Visible dark knots that give away the hairline in bright light or on camera
- Rear tape edges lifting because there is no smooth surface to bond to
- Long custom lead times when a wearer needs a replacement unit now
Who It Is For
- Men with front to mid crown hair loss who want a natural-looking hairline
- Wearers who have experienced knot shedding from lace units after a few washes
- Hair replacement studios needing a repeatable stock unit for walk-in fittings
- Barbers cutting the system in on the head after fitting
- Wholesale buyers building a starter range across base types
Where It Is Worn
- Daily wear in office or social settings where the hairline is seen up close
- Active wearers who sweat and need a base that allows airflow
- Salons fitting a first-time client who wants a natural front without full skin thickness
- Wearers who frequently restyle or re-part their hair through the week
- Distributors stocking a breathable, natural-looking base type between lace and full skin
Technical Features
- Full French lace base across the entire front and sides
- 2 inch NPU strip at the back for tape or glue attachment
- Double mono net at the front for hairline strength
- Front bleached knots for a lighter knot appearance at the hairline
- Indian Remy hair with cuticles aligned in one direction
- 3.0 cm curl and wave setting supplied as standard
Specifications
| Model | Hairpieces for Men |
|---|---|
| Hair Length | 6 inches |
| Hair Texture | Indian Remy hair |
| Hair Colour | Many colours available including grey blend codes |
| Dispatch | Sent in 24 hours |
| Returns | 30 days on unused uncut un-recoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- French lace material for the front and side base
- NPU polyurethane strip at the rear perimeter
- Mono net used in a double layer at the front hairline
How It Is Made
- Base is cut and shaped to the 8 by 10 inch template
- NPU strip is bonded across the 2 inch rear section
- Hair is ventilated into the lace base by hand
- Front knots are bleached to lighten them at the hairline
- Hair is set to a 3.0 cm curl and steamed
- Unit is washed, dried and packed for dispatch
Quality Checks Before Dispatch
- Density checked against the 110% target across front mid and crown
- Hairline knots inspected under light after bleaching
- Base size measured against the 8 by 10 inch spec before packing
- Colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your template
- Hair length ordered longer or shorter than the stock 6 inches
- Density raised or lowered from the standard 110%
- Colour selected from the full code range including grey percentage blends
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to lace front or full skin if breathability or thinness matters more
How It Compares
| Full Swiss or French lace hair system | Apex lasts longer under daily wear but is slightly stiffer and less breathable than full lace |
| Full thin skin poly system | Apex breathes better and holds knots longer but does not give the same fully seamless scalp look |
| Custom made mono unit | Apex ships in 24 hours from stock while a custom build is made to your own template and colour |
Use And Care Guide
- Make a template of your own scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the NPU strip at the rear
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol based products on the knots
- Clean adhesive residue from the NPU after each removal to keep the bond strong
Other Units Buyers Compare With This
Questions About This Unit
How long does a French lace system last compared with full skin?
French lace lasts longer than full skin under daily wear and restyling, but it is not as fully seamless. Actual life depends on how often you wash, style and re-attach it.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size for Hairpieces for Men. Send us your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The front knots are bleached and the front uses a double mono net, so the knots read lighter at the hairline. A full skin or lace front base is thinner still if an undetectable front is your first priority.
How fast is dispatch and delivery?
Hairpieces for Men is a stock unit and is sent within 24 hours. Transit is normally about 5 to 10 days depending on destination.
Can I return it if the colour is wrong?
There is a 30 day return window on units that have not been used, cut or re-coloured. Once a unit is cut in or recoloured it can no longer be returned.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through light browns and 613#, including grey blend codes such as 1B10#, 1B30# and 1B65#.
Ask About Hairpieces for Men
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.