CUSTOMIZED ORDER: LACE +Mono+PU
This customized hair system combines a fine welded mono top with a 0.10mm polyurethane (PU) front and an NPU strip at the back. The base measures 6 by 8 inches and is cut to shape at the front to match the wearer's hairline. European human hair is used at 7 inches in length with a straight texture, and the density is set at 100% along the hairline and 90% elsewhere. The free style front shape allows for natural parting and movement. The unit is built over a 6 to 8 week timeframe and is made to order, not from stock.
Key Benefits
- Fine welded mono top resists knot shedding better than lace under daily wear and restyling
- 0.10mm PU front provides a thin, flexible front that blends with the scalp while holding shape
- NPU strip at the back offers a smooth, flat surface for tape or glue attachment
- Straight European hair texture gives a natural, soft look with minimal frizz
- Custom base size of 6 by 8 inches allows for a precise fit to the wearer's scalp
- Hairline density at 100% ensures full coverage where it matters most
Problems It Solves
- Lace fronts that shed knots or lose shape after a few washes
- Full skin bases that feel hot and trap heat during long wear
- Hairlines that appear too thick or unnatural due to low density
- Front edges that lift because there is no smooth surface for tape or glue
- Standard stock sizes that do not match a client's unique scalp dimensions
Who It Is For
- Men or women with irregular scalp shapes needing a custom base size
- Hair replacement studios building a unit with a specific front shape and density
- Clients who want a thin, flexible front but still need long-term knot retention
- Barbers fitting a system with a clean, straight hairline that can be styled freely
- Wholesale buyers adding a hybrid base type to their product range
Where It Is Worn
- Wearers who need a custom fit for a non-standard scalp shape or hairline
- Clients with a receding hairline who want a natural front with a clean, defined edge
- Salons fitting a client who requires a specific hairline shape and density gradient
- Distributors stocking a hybrid base type that balances durability and thinness
- Wearers who prefer a straight hair texture but still want a natural-looking hairline
Technical Features
- Fine welded mono base across the top section for knot durability
- 0.10mm polyurethane (PU) front with cut edges to match the hairline
- NPU strip at the back for secure tape or glue attachment
- Front hairline density at 100% for full coverage
- Remaining base density at 90% for a natural look without excess weight
- European human hair, straight texture, 7 inches in length
- Free style front shape with CC (custom cut) time of 6 to 8 weeks
Specifications
| Model | Customized Order: Lace + Mono + PU |
|---|---|
| Base Type | Fine welded mono top with 0.10mm PU front and NPU back strip |
| Base Size | 6 x 8 inches |
| Hair Length | 7 inches |
| Hair Texture | Straight European human hair |
| Density | Hairline 100%, other 90% |
| Wave and Curl | Straight |
| Hair Colour | 1B# |
| Front Shape | Free style with CC (custom cut) |
| Production Time | 6 to 8 weeks |
| Attachment Method | Tape or liquid adhesive on NPU strip |
Materials
- Fine welded monofilament base material
- 0.10mm polyurethane (PU) front material
- NPU polyurethane strip for rear attachment
- European human hair, straight texture, cuticle aligned
How It Is Made
- Base is cut to the 6 by 8 inch template with the front edge shaped to the client's hairline
- Fine welded mono is applied across the top section for knot strength
- 0.10mm PU is bonded to the front perimeter and cut to shape
- NPU strip is attached across the back for secure bonding
- European human hair is hand-ventilated into the base at the specified density
- Hair is styled to a straight finish and set with heat
- Unit is inspected for fit, density and hairline before shipping
Quality Checks Before Dispatch
- Base size measured against the 6 by 8 inch template before cutting
- Front edge checked for clean, even cut and proper alignment with the hairline
- Density verified at 100% along the hairline and 90% elsewhere
- Hair colour matched to 1B# under daylight conditions
- Hairline knots inspected for even distribution and natural appearance
Customisation Options
- Base size changed from standard to any custom measurement
- Front shape adjusted to match a specific hairline or client template
- Hair length altered from the standard 7 inches to another length
- Density modified at the hairline or across the base
- Hair texture changed from straight to wavy or curly if needed
- Colour selected from the full range including 1B# and other codes
How It Compares
| Full lace front system | This hybrid base lasts longer under daily wear but is stiffer and less breathable than full lace |
| Full thin skin poly system | The PU front is thinner than full skin but not as seamless; the mono top gives better knot retention than skin |
| Standard stock lace front unit | This unit is custom built to size and shape, while stock units are limited to fixed dimensions and styles |
Use And Care Guide
- Make a template of your scalp before ordering to ensure the base fits your hairline
- Cut the front PU edge to match your natural hairline before the first fitting
- Attach the unit using tape or liquid adhesive on the NPU strip at the back
- Have the hair cut in on the head to blend the front with your own hair
- Wash with a gentle wig shampoo and avoid alcohol-based products near the knots
- Clean adhesive residue from the NPU strip after each removal to maintain bond strength
Other Units Buyers Compare With This
Custom KNP: Gase Skin Around Poly-Coated Base Mens Hair Pieces
View Details →
Custom NC: All V-loop Full Skin Men Hairpiece Toupee
View Details →
Custom STS: front 1/8 Inch V-loop Back Tiny Knots Full Skin Hair Systems
View Details →
Custom Toupee: 1.2 CM Wave Real Hair Injected Skin Human Hair Toupee Sup
View Details →Questions About This Unit
How long does it take to receive a custom order?
This unit takes 6 to 8 weeks to produce and ship after order confirmation.
Can I change the base size or shape after ordering?
Yes, the base size and front shape are fully customizable. Send your template or measurements when placing the order.
Is the 0.10mm PU front breathable?
The PU front is thin and flexible but does not breathe as well as lace. It is more durable than lace but less airy.
Will the hairline look natural in bright light?
The 100% density hairline and straight European hair texture help the hairline look natural, but a full lace front is thinner if invisibility is the top priority.
Can I return a custom unit if it doesn't fit?
Custom units cannot be returned after production. Ensure your template or measurements are accurate before ordering.
Do you supply to salons and distributors?
Yes. Contact us via WhatsApp or email with your base type, size, colour and quantity needs for a wholesale quote.
What colour codes are available?
The full range includes 1B# and other codes. Contact us to confirm availability for specific shades.
Ask About CUSTOMIZED ORDER: LACE +Mono+PU
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.