Custom toupee: LT-22#
LT-22# is a custom men's hair system built on a full Swiss lace top with a 7.9 inch width and 8.7 inch length. The base uses a front form with a CC (custom contour) shape to match the natural curve of the scalp. It features 4 inch Indian Remy human hair in straight texture at 130% density, with no grey blend. The unit is made without a red tone (indicated by the absence of R in the code), so the colour is a standard non-tinged shade. It is produced to order and shipped within 8 to 10 weeks for regular production, or faster with rush options.
Key Benefits
- Full Swiss lace top allows the hairline to move naturally and blend with the scalp under close inspection
- 130% density provides a full appearance without looking artificial
- 4 inch hair length is suitable for styling with parting and volume without exposing the base
- Straight hair texture gives a clean, natural look with minimal frizz
- Custom contour (CC) front form matches the natural shape of the scalp for a better fit
- No red tone in the colour (22R without R) means the shade is neutral and avoids unwanted warmth
Problems It Solves
- Lace hairlines that appear stiff or unnatural due to flat or standard front shapes
- Hair systems that look thin or sparse at the front due to low density
- Hairlines that appear artificial when viewed from the side or under bright light
- Units with red tones that clash with natural hair or skin tone
- Standard base sizes that do not match the wearer's scalp shape or size
Who It Is For
- Men with hair loss in the front or crown area who need a natural-looking hair system
- Wearers who prefer a lace front for breathability and movement over a sealed skin base
- Hair replacement studios needing a custom contour base for precise fitting
- Barbers who cut the hair in on the head after fitting for a seamless blend
- Wholesale buyers building a range of custom units with varying shapes and densities
Where It Is Worn
- Daily wear in professional or social settings where the hairline is seen from close range
- Wearers who want a natural-looking hairline that moves with facial expressions
- Salons fitting a client who needs a custom shape and density for a natural blend
- Distributors stocking a lace front unit with high density and neutral colour
- Wholesale buyers seeking a custom-built unit with a specific shape and hair length
Technical Features
- Full Swiss lace top across the entire front and sides
- Custom contour (CC) front form shaped to match the scalp's natural curve
- 4 inch Indian Remy human hair with cuticles aligned in one direction
- 130% density for a full, voluminous look
- Straight hair texture with no wave or curl
- Base size: 7.9 inches wide by 8.7 inches long
- No red tone in the colour (22R without R)
Specifications
| Model | LT-22# |
|---|---|
| Base Type | Full Swiss lace with custom contour (CC) front form |
| Base Size | 7.9 inches wide by 8.7 inches long |
| Hair Length | 4 inches |
| Hair Texture | Straight |
| Density | 130% |
| Hair Colour | 22R (no red tone, neutral shade) |
| Hair Type | Indian Remy human hair |
| Production Time | 8 to 10 weeks for regular, 6 to 8 weeks rush |
| Transit Time | 4 to 8 working days to Europe and North America |
| Returns | 30 days on unused, uncut, un-recoloured units |
Materials
- Indian Remy human hair with cuticles aligned in one direction
- Swiss lace base material for the front and sides
- Custom contour (CC) shaping applied to the front form
- No red tone added to the colour (22R without R)
How It Is Made
- Base is cut to the 7.9 by 8.7 inch template with a custom contour (CC) front form
- Swiss lace is applied across the front and sides to allow natural movement
- Indian Remy human hair is ventilated into the lace base by hand
- Hair is set to a straight texture and checked for even distribution
- Density is adjusted to 130% across the front, mid, and crown areas
- Colour is matched to 22R (no red tone) under daylight before packing
- Unit is washed, dried, and packed for dispatch
Quality Checks Before Dispatch
- Density checked against 130% target across front, mid, and crown
- Hairline knots inspected under light for even colour and alignment
- Base size measured against 7.9 by 8.7 inch spec before packing
- Colour matched to 22R (no red tone) under daylight before dispatch
- Custom contour shape verified against the template
Customisation Options
- Base size changed from the standard 7.9 by 8.7 inches to your own template
- Hair length adjusted from the stock 4 inches to any length you need
- Density modified from 130% to a lower or higher level
- Colour selected from the full range including 22R (no red tone)
- Hair texture changed from straight to wavy or curly if desired
- Base type switched to French lace, skin, or mono if breathability or durability is a priority
How It Compares
| Full thin skin poly system | Swiss lace breathes better and moves naturally but is less seamless than full skin |
| Full French lace system | Swiss lace is finer and more durable than French lace but may show knots sooner at the perimeter |
| Fine welded mono base | Swiss lace allows more natural hairline movement but may shed knots faster than welded mono under heavy brushing |
Use And Care Guide
- Make a template of your scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the lace perimeter
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the lace after each removal to maintain bond strength
Other Units Buyers Compare With This
Questions About This Unit
How long does it take to make a custom Swiss lace unit?
Regular production takes 8 to 10 weeks. Rush orders take 6 to 8 weeks, double rush 4 to 5 weeks, and crazy rush 15 to 23 days.
Can I change the base size from 7.9 by 8.7 inches?
Yes. Send your own template or measurements and we will build the same base type to your size.
Is the 22R colour tone red or neutral?
22R without R means no red tone is added. The colour is neutral and avoids warmth or red undertones.
How long does the hairline last before knots shed?
The lifespan depends on how often you wash, style, and re-attach the unit. Lace hairlines can shed knots over time with frequent handling.
Can I return it if the colour is wrong?
Yes, if the unit has not been used, cut, or recoloured. Return within 30 days of delivery.
Do you supply salons and distributors?
Yes. Send your base type, size, and colour list via WhatsApp and we will quote your range.
What hair texture is included in the 22R code?
The hair is straight. If you want wavy or curly, that can be customised during production.
Ask About Custom toupee: LT-22#
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.