A-SFFM-FR: Hairnotion Lace Française Wig for men 120% Densi
A-SFFM-FR is a stock men's hair system built on a full French lace base, with an 8 by 10 inch size and 6 inch Indian Remy human hair at approximately 120% density. The front knots are bleached to reduce visibility at the hairline, and the back uses double knots for added durability. It is made with a breathable lace base that allows airflow, which helps reduce scalp heat during daily wear. The unit ships within 24 hours because it is held in stock, and the hair is styled in a freestyle pattern with a 3.0 cm wave setting.
Key Benefits
- Full French lace base allows better airflow than skin or mono, reducing trapped heat
- Bleached front knots help the hairline blend with the scalp under close inspection
- Double knots at the back improve durability compared to single-knot lace systems
- 6 inch hair at 120% density supports multiple parting and styling options
- Freestyle wave pattern gives natural movement without requiring daily re-setting
- Stock item dispatched within 24 hours instead of waiting for a custom build
Problems It Solves
- Lace perimeters that shed knots and thin out at the front after a few weeks
- Full skin bases that seal the scalp and feel hot through a working day
- Visible dark knots that give away the hairline in bright light or on camera
- Rear edges lifting due to lack of a smooth surface for tape or glue
- Long custom lead times when a wearer needs a replacement unit now
Who It Is For
- Men with front to mid crown hair loss who want a natural-looking hairline
- Wearers who find full skin bases too hot or sealed during long days
- Hair replacement studios needing a repeatable stock unit for walk-in fittings
- Barbers who cut the hair in on the head after fitting
- Wholesale buyers building a starter range across base types with breathability
Where It Is Worn
- Daily wear in warm climates where breathability is essential
- Wearers who want a natural-looking hairline without the stiffness of mono
- Salons fitting clients who need a ready-to-wear unit with minimal prep time
- Clients who frequently restyle their hair and need a base that resists knot shedding
- Distributors stocking a breathable, mid-durability base type between lace and skin
Technical Features
- Full French lace base across the entire unit, not only the front
- 8 by 10 inch base size with a 20 by 25 cm measurement
- 6 inch Indian Remy human hair with cuticles aligned in one direction
- Approximately 120% density, providing a full appearance without bulk
- 3.0 cm wave setting supplied as standard, styled in a freestyle pattern
- Front knots bleached to reduce knot visibility at the hairline
- Double knots used at the back perimeter for improved durability
Specifications
| Model | A-SFFM-FR |
|---|---|
| Base Type | Full French lace |
| Base Size | 8 x 10 inches (20 x 25 cm) |
| Hair Length | 6 inches (about 15 cm) |
| Hair Texture | Indian Remy human hair, texture similar to European hair |
| Density | About 120% |
| Wave and Curl | 3.0 cm |
| Hairstyle | Freestyle |
| Hair Colour | 1# Jet black, 1A#, 1B#, 1B10#, 1B20#, 2#, 3#, 4#, 4R#, 5# |
| Dispatch | Sent in 24 hours |
| Transit Time | About 4 to 10 days depending on destination |
| Returns | 30 days on unused, uncut, un-recoloured units |
Materials
- Indian Remy human hair, cuticle aligned
- French lace base with hundreds of small holes for breathability
- Bleached front knots for a lighter appearance at the hairline
- Double knots at the back perimeter for added strength
How It Is Made
- Base is cut to the 8 by 10 inch template
- Lace is prepared with a double knot pattern at the back perimeter
- Hair is hand-ventilated into the lace base with a 3.0 cm wave setting
- Front knots are bleached to lighten the knot colour at the hairline
- Hair is styled in a freestyle pattern and steamed for shape retention
- Unit is washed, dried and packed for dispatch
Quality Checks Before Dispatch
- Density checked against the 120% target across front, mid and crown
- Front knots inspected under light after bleaching for even colour
- Base size measured against the 8 by 10 inch spec before packing
- Hair colour matched to the ordered code under daylight before dispatch
Customisation Options
- Base size changed from the stock 8 by 10 inches to your own template
- Hair length ordered longer or shorter than the stock 6 inches
- Density raised or lowered from the standard 120%
- Colour selected from the full list including 1B10#, 1B20#, and other grey blend codes
- Curl and wave changed from the standard 3.0 cm
- Base construction switched to lace front, full skin, or mono if breathability or durability is a priority
How It Compares
| Full fine welded mono system | A-SFFM-FR breathes better and feels lighter but may shed knots sooner under frequent brushing |
| Full thin skin poly system | A-SFFM-FR allows more airflow and is less likely to trap heat but does not give the same fully seamless scalp look |
| Custom made lace unit | A-SFFM-FR ships in 24 hours from stock while a custom build is made to your own template and colour |
Use And Care Guide
- Make a template of your own scalp before ordering if you are between sizes
- Cut the base back to your template line before the first fitting
- Attach with tape or liquid adhesive on the perimeter where the lace meets the scalp
- Have the hair cut in on the head so the front blends with your own hairline
- Wash with a gentle wig shampoo and avoid alcohol-based products on the knots
- Clean adhesive residue from the lace after each removal to maintain bond strength
Other Units Buyers Compare With This
Questions About This Unit
How long does a French lace system last compared with mono?
Lace systems can last several months under regular wear, but actual life depends on how often you wash, style and re-attach the unit.
Is the 8 by 10 inch base size the only option?
8 by 10 inches is the stock size. Send your own template or measurements and the same base construction can be made to your size.
Will the hairline look natural on camera?
The front knots are bleached and the lace is fine, so the hairline reads as natural under most lighting. A full skin or lace front base is thinner still if an undetectable front is your first priority.
How fast is dispatch and delivery?
A-SFFM-FR is a stock unit and is sent within 24 hours. Transit is normally about 4 to 10 days depending on destination.
Can I return it if the colour is wrong?
There is a 30 day return window on units that have not been used, cut or re-coloured. Once a unit is cut in or recoloured it can no longer be returned.
Do you supply salons and distributors?
Yes. Send your base type, size and colour list on WhatsApp and we will quote the range you want to stock.
What colour codes are available?
The full men's colour range runs from 1# jet black through 1B10#, 1B20#, 2#, 3#, 4#, 4R#, 5#, including light browns and medium browns.
Ask About A-SFFM-FR: Hairnotion Lace Française Wig for men 120% Densi
Send us your base size, colour code and hair length and we will confirm stock, price and lead time.