XK315A6GB Stainless Steel Truck Scale Indicator
Stainless steel weighbridge head storing 200 vehicle numbers and 1000 weighing records.
Product Overview
The XK315A6GB is the weighbridge head: stainless steel housing, a 6 digit 20 mm green LED display, drive capability for eight 350 ohm or sixteen 700 ohm load cells, and the record keeping a gate actually needs. It stores up to 200 vehicle numbers with their tares and 1000 weighing records, and classifies statistics by vehicle, goods number and daily or monthly report.
| Housing | Stainless steel, 320 x 200 x 180 mm |
|---|---|
| Display | 6 digit 20 mm green LED |
| Load cell drive | 8 x 350 ohm or 16 x 700 ohm |
| Record storage | 200 vehicle numbers with tares, 1000 weighing records |
| Printing | Optional built in micro printer, parallel port for 24 pin dot matrix printer |
| Interfaces | RS232 standard, RS485 optional |
| Protection features | Display locks above 130 percent of full scale, low battery indication and auto power off |
| Packing | 4 pieces per carton, 42 x 60 x 60 cm, 23 kg |
Category: Weighing Indicators
Key Benefits
- Stores 200 vehicle numbers with tares and 1000 weighing records
- Drives up to 8 x 350 ohm or 16 x 700 ohm load cells for long decks
- Indicator can be replaced without recalibration
- Stainless steel housing with an optional built in micro printer
Problems It Solves
- Tares written on paper and re entered for every movement
- Full recalibration needed whenever a head is swapped
- Monthly reporting assembled by hand from tickets
Who It Is For
- Weighbridge operators and installers
- Quarries, recycling yards and grain depots
- Transport yards weighing inbound and outbound vehicles
Application Scenarios
- Gate weighing with stored tares for regular vehicles
- Daily and monthly tonnage reporting by goods type
- Replacing a failed weighbridge head without recalibrating the deck
Technical Features
- Stainless steel housing, 320 x 200 x 180 mm, 6 digit 20 mm green LED
- Drives up to 8 x 350 ohm or 16 x 700 ohm load cells
- Four point calibration and replacement without recalibration
- Stores 200 vehicle numbers and tares, 1000 weighing records and statistical reports
- Parallel interface for an external 24 pin dot matrix printer, RS232 serial with optional RS485
Full Specification Data
These are the manufacturer figures for this model. Nothing has been rounded, averaged or filled in where the factory did not publish it.
| Housing | Stainless steel, 320 x 200 x 180 mm |
|---|---|
| Display | 6 digit 20 mm green LED |
| Load cell drive | 8 x 350 ohm or 16 x 700 ohm |
| Record storage | 200 vehicle numbers with tares, 1000 weighing records |
| Printing | Optional built in micro printer, parallel port for 24 pin dot matrix printer |
| Interfaces | RS232 standard, RS485 optional |
| Protection features | Display locks above 130 percent of full scale, low battery indication and auto power off |
| Packing | 4 pieces per carton, 42 x 60 x 60 cm, 23 kg |
Materials And Construction
- Stainless steel housing
Customisation Options
- Optional built in micro printer
- Optional RS485 serial interface
- kg or t display units
Use Guide
- Load regular vehicle tares into memory so drivers do not need a first weighing each time
- Check total bridge resistance before connecting more than eight cells
- Use the daily and monthly report classification rather than assembling figures from tickets
How It Compares
| XK315A6P truck scale indicator | Same weighbridge feature set in a plastic housing with a larger 30.5 mm red LED and a built in micro printer as standard. |
|---|---|
| XK3118T6-P printing indicator | The XK3118T6-P is a platform scale printing head. The A6GB adds vehicle number storage, record keeping and much higher cell drive capability. |
Often Ordered With This Model
XK315A6P Printable Truck Scale Indicator
Printable weighbridge head with a large 30.5 mm red LED and built in micro printer.
View specifications →
Steel Deck Truck Scale
Weighbridge deck built to site dimensions, 6 m to 24 m, with OIML R60 cells and a printable indicator.
View specifications →
HM9B Double Shear Beam Load Cell
Hermetically welded double shear beam cell for truck and railway scales, 10 t to 50 t.
View specifications →Truck Scale Deck Sizing And Site Preparation
A weighbridge is bought once and lived with for a decade. These are the decisions that cannot be changed afterwards.
How To Choose A Weighing Indicator
Indicators are bought by part number and regretted by function. Decide what the head has to do on site first, then check it can drive your cells.
XK315A6GB Stainless Steel Truck Scale Indicator Questions
How many weighing records does it hold?
Up to 1000 weighing records with statistical reports, plus 200 stored vehicle numbers and tares.
Can the head be swapped without recalibrating the weighbridge?
The specification states the indicator can be replaced without recalibration, and four point calibration is supported.
Does it include a printer?
A micro printer is optional, and there is a parallel interface for an external 24 pin dot matrix printer.
Get A Quotation For The XK315A6GB Stainless Steel Truck Scale Indicator
Tell us the capacity, accuracy class or division you need and the destination market. We will confirm availability, documentation and freight.