Marsh Bellofram Type Transducer
Fairchild Type Transducer
Flowserve Type Transducer
EPC Type Transducer550ACD Electro Pneumatic Converter OEM Order
An OEM batch of the miniature 550 series built with the DIN 43650 connector, the plug-in termination used across European-built plant.
Controlair Type Transducer 550-A-C-D: 4-20 mA input, 3-15 psig output, DIN 43650 connector, customer branded
What The Customer Needed
The customer builds packaged equipment wired entirely with DIN plugs. A conduit or terminal-block instrument would have forced a wiring change on their assembly line.
How It Was Built
The D field of the 550 coding system selects the DIN 43650 connector, so the termination was specified at the order stage rather than adapted afterwards, and the units arrived matching the customer's harness.
What The Photographs Show
Connectors were fitted and gasket-checked before calibration, then the batch was tested with the plugs in place. The photographs show the units in rows with their connectors fitted, which is how they shipped.
How It Finished
Instruments that plugged straight into the customer's existing harness, under their own label.
The Models Behind This Order
Controlair Type Transducer550ACT Electro Pneumatic Transducer
550-A-C-T built configuration: 4-20 mA, 3-15 psig, terminal block
View specifications →
Controlair Type Transducer500X Electro Pneumatic Transducer
Controlair pattern I/P transducer, 4-20 mA in, 3-15 to 3-120 psi out
View specifications →
Controlair Type Transducer500X Electro Pneumatic Converter
Controlair pattern E/P converter, 0-5 V, 1-9 V and 0-10 V inputs
View specifications →
Controlair Type Transducer500AC Electro Pneumatic Transducer
500-AC configuration, 4-20 mA in, 3-15 psi out, 180 ohms
View specifications →Questions About OEM Orders
Can this configuration be supplied under our own brand
Yes. Nameplates are printed to customer artwork and part numbering and checked against the build before fitting.
How is a batch kept consistent
The whole quantity is built in one run and calibrated consecutively on the same bench against the same standard current generator and 0.1 class pressure gauge.
What is the specification on this order
550-A-C-D: 4-20 mA input, 3-15 psig output, DIN 43650 connector, customer branded.
Can we order a different range in the same body
Yes. The published selection table or coding system for this pattern lists the available input signals, output ranges and terminations.
Order The Same Configuration
Send the range, the termination and the quantity, and the quotation comes back against the published selection table for this pattern.