Container Lashing And Locking
Lashing gear works under repeated tensioning, so the chain and the shackles have to hold their rating through hundreds of cycles rather than one test pull.
What Goes Wrong In This Sector
- Screw pin shackles backing out on lashing points left under load
- General purpose chain used where a rated grade is required
- Rust bleed from plated fittings onto cargo and deck
What Buyers Actually Ask For
- Bolt type shackles with safety pin and nut for permanent lashing points
- Grade 70 transport chain for tie-down duty
- Stainless fittings where rust staining is unacceptable
Categories We Supply Into Container Lashing And Locking
Shackle
European, American and stainless pattern dee and bow shackles with screw or bolt pin closure.
Open category →
American Standard Link Chain
Welded link chain to ASTM and NACM specifications in grades 30, 43 and 70.
Open category →Stainless Steel Fittings
AISI 304 and 316 stainless rigging fittings for saltwater and washdown service.
Open category →
Ordinary Mild Steel Link Chain
Low cost welded mild steel chain for binding, traction and securing duty.
Open category →Products most often ordered
European Bow Type Shackle Stainless Steel
European bow type shackle in AISI 304 and AISI 316 stainless steel, forged in one piece with a screw pin and a…
View product →
U.S D Type Shackle Stainless Steel
U.S. pattern dee shackle in AISI 304 and AISI 316 stainless steel, dimensioned to the Crosby 210 and 2150 pattern and…
View product →
European D Type Shackle Stainless Steel
European dee shackle to EN 13889, forged in one piece from AISI 304 or AISI 316 stainless steel with a polished…
View product →
European Type Bow Shackle
The European type large bow shackle, also called an omega shackle, has a wider bow than a dee shackle, giving a…
View product →
European Type Dee Shackle
The European type dee shackle takes its name from its D shape, with an entrance the same width as the body. That…
View product →
US type G209 Screw Pin Shackle
The US type G209 screw pin shackle is drop forged with a 45# carbon steel body and 40Cr alloy steel pin, heat…
View product →
D-type Shackle G210
The G210 screw pin chain shackle has straight legs, which makes it the right choice for two-directional in-line…
View product →
American Standard G2150 Forged D Type Shackle
The G2150 US type dee bolt shackle is a forged anchor shackle supplied with a safety pin and nut, manufactured in…
View product →How We Handle Orders For This Sector
Bolt or screw pin closure selected for the duty
Grade markings legible for inspection
Export packing in cartons, bags or wooden boxes
Technical Reading For This Sector
Grade 30 Grade 43 And Grade 70 Chain Compared
Why proof coil, high test and transport chain are not interchangeable, and what each one is actually rated for.
Read guide →Surface Treatments For Marine And Industrial Chain
Self colour, electro galvanized, hot dip galvanized, blackened, carburized and plastic coated: what each finish is actually for.
Read guide →Choosing A Shackle Dee Bow Screw Pin Or Bolt Type
Two decisions decide which shackle belongs in an assembly: the direction the load pulls, and how long the connection stays made up.
Read guide →Container Lashing And Locking Supply Questions
Do you supply container lashing and locking customers directly?
Yes. We supply end users, contractors and distributors in this sector directly from Qingdao, with export packing and documentation handled in house.
Can you match what we already have installed?
In most cases yes. Send a photo, a drawing or the existing specification and we will identify the pattern, grade and dimensions before quoting.
Which certificates apply to this sector?
Marine and offshore items carry class certificates from LR, ABS, BV, GL, DNV, RINA, NK, KR, RS, IRS or CCS. Industrial chain and rigging follow ASTM, NACM, DIN, EN or Australian Standard specifications.
How fast will we get a quotation?
Within 24 hours of your enquiry reaching our sales team.
Supply For Container Lashing And Locking
Tell us the project, the sizes and the standard you work to. We will come back with a quotation, a lead time and the certificate options within 24 hours.