Silage Wrap Film
Silage Wrap Film
TSPLAS silage wrap film is a UV resistant bale wrap film supplied at 20 inch by 6000 feet and 30 inch by 5000 feet in 1 mil, in white, green or...
View specification →
Bale Net Wrap
HDPE Round Bale Net Wrap
TSPLAS bale net wrap is a 100 percent virgin HDPE net for round balers, produced in widths from 48 inch to 67 inch with guaranteed roll length and tensile strength above 2800 N. It has been exported to the United States, Canada, Australia and Ireland in volume since 2007.
Overview
What This Product Is Built To Do
Net wrap is judged on two numbers a contractor can check: how many bales a roll actually produces, and whether the net holds when the chamber tightens. TSPLAS net wrap is extruded from 100 percent virgin HDPE with high UV protection, carries guaranteed length with roll end marking, and is packed in a weatherproof bag sealed at both ends so it survives farm and dealer storage. Full bale coverage leaves a smooth lay flat surface, which is what keeps moisture out of the shoulder of the bale through a wet winter.
Key Benefits
- Guaranteed length on every roll so cost per bale holds all season
- Tensile strength above 2800 N for dense silage and straw bales
- Full bale coverage including the bale edge, so the shoulder does not weather
- Reduced moisture permeability keeps hay quality through storage
- Directional roll side marking so the roll is loaded right the first time
Problems It Solves
- Rolls that run short and break a cost per bale calculation
- Weathered bale shoulders caused by incomplete edge coverage
- Net tearing in the wrapping chamber and stopping the baler
- Rolls damaged in store because the packaging was not weatherproof
Who It Is For
- Contract balers and custom harvest crews
- Hay and straw merchants shipping bales on
- Machinery dealers stocking baler consumables
- Importers supplying forage regions by the container
Application Scenarios
- Round baling of hay, straw and silage
- Contract baling across many farms in a short weather window
- Outdoor bale stacks held through an entire winter
- Bales handled and transported repeatedly before feeding
Specifications
Published Numbers Not Estimates
Every figure below is the specification we produce to. Anything not listed is quoted against your machine.
| Material | 100 percent virgin HDPE |
|---|---|
| Widths | 48 in to 67 in, other widths to order |
| 48 in sizes | 48 x 9840, 48 x 11800 and other lengths |
| 51 in sizes | 51 x 9840, 51 x 11800 and other lengths |
| 64 in sizes | 64 x 7000, 64 x 8000, 64 x 9000 and other lengths |
| 67 in sizes | 67 x 7000, 67 x 8000, 67 x 9000 and other lengths |
| Tensile strength | Guaranteed above 2800 N |
| UV protection | High UV stability |
| Packing | Weatherproof bag sealed at both ends |
| Baler compatibility | All makes of round balers |
Technical Features
- 100 percent virgin HDPE, not regrind
- High UV stability for extended outdoor exposure
- Improved tear resistance under chamber tension
- Roll end marking and directional roll side marking
- Smooth lay flat bale surface on release
Materials
- 100 percent virgin high density polyethylene
- UV stabiliser package
Certifications And Patents
- ISO 9001 certified production facilities
Manufacturing
How It Is Made And Checked
HDPE extrusion
Knitting to width
Length controlled winding
Roll end and side marking
Weatherproof bagging and palletising
Quality Control
- Roll length measured at winding against the guaranteed figure
- Tensile testing against the 2800 N specification
- Width checked against the 48 to 67 inch range
- Bag seal integrity checked before palletising
Customisation Options
- Any width produced to your baler specification
- Roll length set to your preferred bale count
- Colour edge marking on request
Downloads
Comparison
How It Compares With The Alternatives
| Baler twine on a round baler | Net wrap covers the full bale surface in a few revolutions, so the bale is tighter, sheds water better and the chamber cycle is shorter. |
|---|---|
| Net wrap made with recycled content | Virgin HDPE holds the tensile and UV specification consistently, which is what keeps the guaranteed length meaningful. |
| Silage wrap film | Net wrap contains and protects the bale, while silage film seals it airtight for fermentation. On a silage bale the two are used together, not instead of each other. |
Use Guide
Getting The Specification You Paid For
- Load the roll following the directional roll side marking
- Set chamber tension for the crop rather than running one setting all season
- Check the roll end marking when the warning band appears and change the roll at a headland
- Keep opened rolls in their weatherproof bag between days
- Stack finished bales on a free draining site so full coverage can do its job
FAQ
Bale Net Wrap Questions
Does the net fit my baler?
It is produced for all makes of round balers in widths from 48 inch to 67 inch, and other widths are made to order.
Is the stated roll length the real length?
Yes. Guaranteed length is part of the specification, and every roll carries roll end marking so the operator knows when it is finishing.
How strong is the net?
Tensile strength is guaranteed above 2800 N, which covers dense silage and straw bales.
Can it be used on silage bales?
Yes, it is suitable for all crops under all conditions and is regularly used on silage bales before wrapping film is applied.
How quickly can you produce an order?
Production is within 20 days, depending on the production plan at the time of order.
Which markets do you already supply?
Net wrap has been exported in large quantity to the United States, Canada, Australia and Ireland since 2007.
Related Products
Baler Twine
Baler Twine
TSPLAS baler twine is a synthetic polypropylene twine for square balers, supplied from 150 lbs by 7200 ft up to 650 lbs by 3600 ft in green, orange,...
View specification →Keep Reading
Get A Price On Bale Net Wrap
Send the size, colour and quantity you need. There is no minimum order quantity and production runs within 20 days.