Plastic Bearing Housing for Circular Knitting Machines

Cylinder related parts and cylinder cleaners for single jersey and double jersey circular knitting machines.

Part groupCylinders
Supplied byHUAXIATEX, Beijing

Send a photo of the old part beside a ruler and we will confirm the match before you order.

Product Overview

Plastic Bearing Housing for Circular Knitting Machines is listed in our cylinders group for circular knitting machine maintenance. Cylinder related parts and cylinder cleaners for single jersey and double jersey circular knitting machines.

What This Part Does

The cylinder carries the needles in its tricks and turns against the cam box. Trick condition decides how freely needles move, so cylinders are cleaned and checked whenever needles are changed. Cylinder cleaners are made to the gauge of the machine so the blade enters the trick correctly.

Key Benefits

Cleaners made to machine gauge so they reach the bottom of the trick
Supports the needle change routine rather than replacing it
Reduces needle sticking caused by packed fly and old oil

Application Scenarios

Cylinder cleaning during needle changes
Planned machine overhaul
Second hand machine reconditioning

Who It Is For

Maintenance teams on a needle change cycle
Machine rebuilders

Problems It Solves

Needles sticking in tricks packed with fly and oil residue
Uneven needle movement after a long run without cleaning

Specifications

Specifications for Plastic Bearing Housing for Circular Knitting Machines
Product name	Plastic Bearing Housing for Circular Knitting Machines
Part group	Cylinders
Machine type	Circular knitting machines
Supplier	Beijing Huaxiatex Co. Ltd., Beijing, China
Listed reference photo	Supplied from our own product records

Only values printed on the product name and in our own records are listed here. Dimensions, material and hardness are confirmed against your machine before you order, not assumed.

What to Send Us When You Order

Machine gauge
Machine builder, model and diameter
Whether the machine is single jersey or double jersey

Chat on WhatsApp

Use Guide

Confirm the reference against the old part and the machine plate before ordering a full machine set.
Order one complete set per machine where the part is fitted in multiples, so wear is even across the fabric.
Clean the mounting position before fitting. Fly and old oil are the most common cause of a new part not seating.
Check the machine on a short run and measure the fabric before returning it to full production.
Record the reference against the machine so the next reorder does not have to be identified again.

Cylinders Questions

Why does a cylinder cleaner have to match the gauge?

The blade has to enter the trick without forcing. A cleaner for a coarser gauge will not enter, and one for a finer gauge will not clean the trick walls.

When should tricks be cleaned?

Normally at every needle change, and during a planned overhaul.