Accessories OF Lubricator for Circular Knitting Machines (Item 6)

Item 6 of 7 listed under lubricators and blowers under this product name. Items sharing a name are told apart by the photograph, so check the photograph against your old part before ordering.

Electric and quantitative oilers, oil distribution fittings, and blowers and fan cleaners that keep the needle bed oiled and free of lint.

Part groupLubricators and Blowers
Supplied byHUAXIATEX, Beijing

Request a Quote Email Us

Send a photo of the old part beside a ruler and we will confirm the match before you order.

Product Overview

Accessories OF Lubricator for Circular Knitting Machines (Item 6) is listed in our lubricators and blowers group for circular knitting machine maintenance. Electric and quantitative oilers, oil distribution fittings, and blowers and fan cleaners that keep the needle bed oiled and free of lint.

What This Part Does

Two things kill needles and sinkers on a circular machine, dry running and lint. A lubricator meters knitting oil to the needle bed and cam box at a set rate through distribution tubing and nozzles. A blower or fan cleaner sweeps lint away from the needle line and the yarn path before it packs into the tricks.

Oil rate is set low and steady on purpose. Too little and the needles run dry, too much and the oil goes into the fabric and has to be washed out.

Key Benefits

Metered delivery instead of hand oiling, so every feeder position gets the same rate
Complete range from oiler units to nozzles, tubing and fittings
Blowers and fan cleaners reduce lint packing at the needle line
Reduces the needle and sinker consumption caused by dry running

Application Scenarios

Needle bed and cam box lubrication on single and double jersey machines
Yarn path and creel area lint control
Machines running high lint yarn such as open end cotton
Retrofitting hand oiled machines with a metered oiler

Who It Is For

Mills wanting to cut needle and sinker consumption
Maintenance teams standardising oil rate across a machine park
Machine rebuilders replacing missing oiling equipment

Problems It Solves

Needle and sinker wear from dry or uneven oiling
Oil stains in the fabric from over oiling or a leaking fitting
Lint packing in the tricks causing needle sticking
Hand oiling that varies between operators and shifts

Specifications

Specifications for Accessories OF Lubricator for Circular Knitting Machines (Item 6)
Product name	Accessories OF Lubricator for Circular Knitting Machines (Item 6)
Part group	Lubricators and Blowers
Machine type	Circular knitting machines
Supplier	Beijing Huaxiatex Co. Ltd., Beijing, China
Listed reference photo	Supplied from our own product records

Only values printed on the product name and in our own records are listed here. Dimensions, material and hardness are confirmed against your machine before you order, not assumed.

What to Send Us When You Order

Machine builder, model and diameter
Oiler model, or a photo of the unit fitted
Supply voltage for electric units
Number of outlets and the tubing size in use

Chat on WhatsApp

Use Guide

Confirm the reference against the old part and the machine plate before ordering a full machine set.
Order one complete set per machine where the part is fitted in multiples, so wear is even across the fabric.
Clean the mounting position before fitting. Fly and old oil are the most common cause of a new part not seating.
Check the machine on a short run and measure the fabric before returning it to full production.
Record the reference against the machine so the next reorder does not have to be identified again.

Lubricators and Blowers Questions

How much oil should a machine get?

The rate depends on machine speed, yarn and ambient conditions, so it is set on the machine and then checked on the fabric. The goal is the lowest rate that keeps the needle bed lubricated without marking the fabric.

Which oil should be used?

Use a knitting oil intended for needle bed lubrication that washes out of the fabric. Follow your machine builder recommendation for viscosity.

Can a blower be fitted to an older machine?

In most cases yes, provided there is a mounting point and a power supply. Send photos of the machine top and the area around the needle line.

Do you supply the small fittings and tubing?

Yes. Nozzles, tube fittings and lubricator accessories are listed in this group.