ATQ Bobbins
ATQ coil formers for the flat low profile ATQ core shape used in high density chargers and adapters.
What This Series Covers
ATQ coil formers for the flat low profile ATQ core shape used in high density chargers and adapters. There are 35 published part numbers, and every one lists the plastic, the pin count and the pin geometry where the drawing states them.
If a geometry in this series is close but not exact, the tool room can modify pin counts, section splits and mounting features on a new tool rather than forcing a redesign around a stock part.
Materials Used In This Series
Counted from the published data for these 35 parts.
| Phenolic | 35 parts |
|---|
All Parts In This Series
ATQ17 BasePhenolic
ATQ17 Bobbin 4+2 PinsPhenolic
ATQ17 Bobbin 5+0 Pins5+0 pinsPhenolicP 3.4mm
ATQ17 Bobbin 5+5 Pins5+5 pinsPhenolic
ATQ1715 Bobbin 4+2 Pins4+2 pinsPhenolic
ATQ21 Bobbin 5+0 Pins5+0 pinsPhenolicP 3.4mm
ATQ22 Bobbin 4+4+4 Pins4+4+4 pinsPhenolic
ATQ23 Bobbin 4+0 Pins4+0 pinsPhenolicP 3.4mm
ATQ23 Bobbin 4+1 Pins4+1 pinsPhenolic
ATQ23 Bobbin 4+2 Pins4+2 pinsPhenolic
ATQ23.2X10 Bobbin 4+0 Pins4+0 pinsPhenolic
ATQ23.2X10.6 Bobbin 4+0 Pins4+0 pinsPhenolic
ATQ23.7X14.6 Bobbin with Gap 3+3 Pins3+3 pinsPhenolic
ATQ23.7X14.6 Bobbin 3+3 Pins3+3 pinsPhenolic
ATQ24 Bobbin 4+0 Pins4+0 pinsPhenolic
ATQ25 Bobbin 2+2 Pins2+2 pinsPhenolic
ATQ25 Bobbin 4+4 Pins4+4 pinsPhenolic
ATQ25 Bobbin 4+4 Pins4+4 pinsPhenolic
ATQ26 Bobbin 2+0 Pins2+0 pinsPhenolic
ATQ26 Bobbin 5+0 Pins5+0 pinsPhenolic
ATQ27 Bobbin 4+4 Pins4+4 pinsPhenolic
ATQ27 Bobbin 1 Pin1 Pin pinsPhenolic
ATQ27 Bobbin 2+0Pins2+0 pinsPhenolic
ATQ27 Bobbin 2+2 Pins2+2 pinsPhenolic
ATQ27 Bobbin 4+0 Pins4+0 pinsPhenolic
ATQ27 Bobbin 5+0 Pins5+0 pinsPhenolic
ATQ27 Bobbin 5+0 Pins5+0 pinsPhenolic
ATQ27 Bobbin 5+0 Pins L Pin5+0 pinsPhenolic
ATQ27 Bobbin 5+0 Pins L pin5+0 pinsPhenolic
ATQ28 Bobbin 5+0 Pins5+0 pinsPhenolic
ATQ30 Bobbin 5+0 Pins L Pin5+0 pinsPhenolic
ATQ31 Bobbin 3+3 Pins3+3 pinsPhenolic
ATQ32 Bobbin 3+3 Pins3+3 pinsPhenolic
ATQ34 BobbinPhenolic
ATQ34 Bobbin 2+2 Pins2+2 pinsPhenolicSelection Table
Every published part in this series with its geometry side by side.
Questions About ATQ Bobbins
How many atq bobbins are published
35 part numbers, listed above with material and pin geometry.
What if my size is not in the list
Send the drawing. Tool design and injection moulding are in-house services, so a size that is not in the catalogue is quoted as a tooling job rather than turned away.
Which plastics are used in this series
Phenolic.
Can you supply the matching core
Yes. Silicon steel amorphous and nanocrystalline cores are in the same catalogue and complete wound components can be quoted.
Do you provide drawings and CAD
Dimensioned drawings are sent as PDF on request. CAD files are released on request via WhatsApp or email rather than as an open download.
Send Your Part List
Catalogue parts are quoted from existing tooling. Anything outside the list is quoted from your drawing.