Carbide Inserts
Carbide Cutting Inserts
Indexable turning and milling inserts plus interchangeable insert blanks
Product Detail
Product Category
Tungsten Carbide Inserts and Cutting Inserts
Varieties of tungsten carbide inserts including coated and uncoated indexable shapes for turning and milling and interchangeable cutting inserts for machine tools.
Problems It Solves
What Goes Wrong Today
- Insert supply is fragmented across several traders with different quality
- Edge build up and chipping shorten the tool life on interrupted cuts
- Non standard insert geometries are hard to source in small volume
Benefits
What Changes With Carbide
- Standard shapes and drawing based special shapes come from one plant
- Insert blanks can be supplied for your own grinding and coating line
- Consistent substrate from the same pressing and Sinter-HIP route
Types We Produce
Forms in This Category
- Indexable turning inserts
- Milling inserts
- Interchangeable cutting inserts and insert blanks
Grades tolerances and dimensions are confirmed against your drawing when you enquire.
Product Photographs
Carbide Inserts in Production
These are photographs of parts produced in our own plant. Each caption describes what the picture actually shows.
Related
All Product Categories
Products in This Category
Application Scenarios
Industries That Use This Category
Keep Reading
Related Cases and Guides
Carbide Sleeve With 176 Holes
A carbide sleeve of OD 268 mm x ID 228.6 mm x H 160 mm carrying 176 holes produced for oil field service equip…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read MoreSinter-HIP Process Guide
The production route from WC powder through ball milling spray drying pressing Sinter-HIP and machining and wh…
Read More
FAQ
Carbide Inserts FAQ
Which industries buy carbide inserts from you?
Mainly Wood and Metal Cutting, Automotive and Bearing, Metal Forming and Wire Drawing. Tell us your application and we will confirm what suits it.
Can you produce carbide inserts to our drawing?
Yes. Custom made carbide parts to drawing are a normal part of our production. Send the drawing or a measured sample and we will confirm what is manufacturable in carbide.
What material are these parts made from?
Cemented tungsten carbide which is tungsten carbide grain in a cobalt binder. The grade direction is chosen with our engineers against your load case rather than sold as one universal grade.
How are the parts densified?
Blanks are densified by Sinter-HIP which applies isostatic gas pressure during the sintering cycle so residual porosity is reduced before machining.
What do you need in order to quote?
The drawing or a sketch with measured dimensions the quantity and a short description of the application. Send it on WhatsApp to +86 187 7492 5813 or by email to [email protected].
Next Step
Get a Quotation for Carbide Inserts
Send the drawing the quantity and a short note about the application. Our engineers reply with a specification you can check before ordering.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.