Carbide Blades
Carbide Blades and Cutters
Straight knives profiled cutters and marked repeat blades to drawing
Product Detail
Product Category
Tungsten Carbide Blades Cutters and Saw Discs
All kinds of tungsten carbide blades and cutters together with circular carbide saw discs for paper board plastic film wood and light metal cutting lines.
Problems It Solves
What Goes Wrong Today
- Blade changes stop the converting line several times per shift
- Steel knives smear the cut on abrasive board and filled plastics
- Reground blades lose concentricity and the cut edge starts to wander
Benefits
What Changes With Carbide
- Longer runs between blade changes on abrasive materials
- Ground side faces and bores keep the disc running true on the arbor
- Blades can be produced to a marked drawing so repeat orders stay identical
Types We Produce
Forms in This Category
- Straight carbide knives and machine blades
- Profiled carbide cutters
- Carbide saw discs and slitting discs
Grades tolerances and dimensions are confirmed against your drawing when you enquire.
Product Photographs
Carbide Blades in Production
These are photographs of parts produced in our own plant. Each caption describes what the picture actually shows.
Application Scenarios
Industries That Use This Category
Keep Reading
Related Cases and Guides
Carbide Strips up to 1800 mm
Carbide strip production where the standard length is 330 mm and the maximum length produced in one piece is 1…
Read MoreTungsten Carbide Grade Guide
How cobalt content and grain size move hardness against toughness and how to describe your application so a su…
Read MoreSinter-HIP Process Guide
The production route from WC powder through ball milling spray drying pressing Sinter-HIP and machining and wh…
Read More
FAQ
Carbide Blades FAQ
Which industries buy carbide blades from you?
Mainly Paper Printing and Packaging, Wood and Metal Cutting, Automotive and Bearing. Tell us your application and we will confirm what suits it.
Can you produce carbide blades to our drawing?
Yes. Custom made carbide parts to drawing are a normal part of our production. Send the drawing or a measured sample and we will confirm what is manufacturable in carbide.
What material are these parts made from?
Cemented tungsten carbide which is tungsten carbide grain in a cobalt binder. The grade direction is chosen with our engineers against your load case rather than sold as one universal grade.
How are the parts densified?
Blanks are densified by Sinter-HIP which applies isostatic gas pressure during the sintering cycle so residual porosity is reduced before machining.
What do you need in order to quote?
The drawing or a sketch with measured dimensions the quantity and a short description of the application. Send it on WhatsApp to +86 187 7492 5813 or by email to [email protected].
Next Step
Get a Quotation for Carbide Blades
Send the drawing the quantity and a short note about the application. Our engineers reply with a specification you can check before ordering.
Send a drawing or a sample photo on WhatsApp or by email. Files are reviewed by our production engineers, not by a form.