MZDV0640 Mini 6.7: 1 Zoom Monocular Video Microscope

Key Benefits

• 6.7:1 zoom ratio covers a wide range from 0.6X to 4.0X without changing objectives
• 82mm standard working distance allows room for tools, probes or small components under the optics
• CS-mount standard allows direct attachment of 1/2" CCD or CMOS cameras without adapters
• Adjustable high-brightness LED coaxial illumination improves contrast and visibility
• Multiple objective adapters (0.3X to 2X) extend working distance from 35mm to 293mm and total magnification to 16X
• Fixed dimension Φ35mm between holder and main body ensures compatibility across components

Application Scenarios

• SMD and BGA component inspection with a soldering iron or probe under the optics
• Incoming inspection of small mechanical parts, connectors and moulded components
• Teaching electronics assembly techniques using a shared monitor view
• Jewellery and watchmaking assembly where hands work under the optics
• Documentation of micro-assembly steps with a camera attached to the CS-mount

Who It Is For

• Electronics manufacturers doing SMD and BGA rework and inspection
• Teaching labs in vocational schools and technical colleges
• Precision assembly workshops in jewellery, watchmaking and micro-mechanics
• Quality control teams needing to capture images for inspection reports
• Small-scale production lines requiring a compact, low-cost video microscope

Problems It Solves

• A fixed magnification microscope forces the operator to swap objectives when changing inspection scale
• Lack of working distance prevents using a soldering iron or probe under the optics
• Separate camera and microscope setups often mismatch the tube diameter and require custom adapters
• Low brightness or uneven illumination makes fine detail hard to see in small parts
• No standard mounting interface increases setup time and reduces repeatability

Technical Features

• 6.7:1 zoom ratio with 0.6X to 4.0X magnification range on the zoom body
• Standard 1X objective with 82mm working distance, extendable to 293mm with 0.3X objective
• CS-mount standard with 12.5mm distance from bearing surface to CCD plane
• Adjustable high-brightness LED coaxial illumination for consistent lighting
• Fixed dimension Φ35mm between holder and main body for component compatibility
• Supports multiple objective adapters: 0.3X, 0.5X, 0.75X, 1X, 1.5X, 2X
• Maximum compatible camera size: 1/2" CCD with screw mount 1 inch 32 button
• Field of view varies from 1.5X2.0mm to 40X53.33mm depending on objective and magnification
• Resolution ranges from 16μm at 0.6X to 3.5μm at 4.0X
• Distortion under 0.5% across the zoom range, with 0.04% at 4.0X

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose between monocular head and optional trinocular head configuration
• Select objective adapters from 0.3X to 2X to adjust working distance and total magnification
• Attach any 1/2" CCD or CMOS camera with a 1 inch 32 button screw mount
• Use the CS-mount to integrate the microscope into a custom inspection station
• Match the Φ35mm holder dimension with other components in the same system

Comparison With Other Options

Use Guide

• Set the zoom to the lowest magnification (0.6X) before attaching the camera or objective adapter
• Use the 1X objective as the baseline; attach other adapters to extend working distance or magnification
• Ensure the camera is mounted with the 1 inch 32 button screw to match the CS-mount standard
• Adjust the LED illumination brightness to avoid overexposure on shiny surfaces
• Verify the working distance before placing tools or components under the optics to avoid collision