MZDH0850 Zoom Monocular Video Microscope

Key Benefits

• 0.75X to 5X zoom range allows locating a feature at low power and inspecting fine details without changing objectives
• 1X standard objective with optional objectives from 0.3X to 2X extends magnification to 7.5X for detailed inspection
• 180° light path transition enables upright viewing while the image is displayed on a monitor
• CS mount supports 1/2" CCD/CMOS sensors with screw mount, so the camera is compatible with standard digital imaging chains
• Φ45mm body matches standard metallographic lens mounts, so it can be integrated with Nikon, Olympus, and Mitutoyo objectives

Application Scenarios

• Bench inspection of PCBs, SMD components, and small mechanical parts with live video output to a monitor
• Documentation of solder joints, wire bonds, and surface defects using a connected camera
• Teaching or training sessions where a single operator views through the eyepiece while others watch the live image on a screen
• Quality control checks in electronics manufacturing where inspection records require attached images
• Inspection of small parts in watchmaking, jewellery, or precision assembly where a single eyepiece is sufficient

Who It Is For

• Electronics manufacturers doing PCB and SMD inspection and rework
• Quality departments that require image documentation for inspection reports
• Teaching laboratories in electronics, engineering, or materials science
• Precision assembly workshops in watchmaking, jewellery, and micro-mechanics
• Small-scale research or development labs needing a low-cost digital inspection solution

Problems It Solves

• A monocular head with no camera forces the operator to describe defects instead of showing them
• Fixed magnification stands require swapping objectives between locating a fault and inspecting it
• Lack of a 180° light path transition makes it difficult to view the sample upright while watching a monitor
• Mismatched thread sizes between microscope body and camera prevent direct integration
• No standard mounting interface limits compatibility with existing metallographic objectives

Technical Features

• Monocular head with 0.75X to 5X zoom range, providing a continuous magnification span
• 1X objective as standard, with optional objectives from 0.3X to 2X to extend magnification
• CCD adapters from 0.3X to 2X allow further magnification adjustment
• 180° light path transition for upright viewing while the image is displayed on a monitor
• Φ45mm body diameter matches standard metallographic lens mounts for compatibility with Nikon, Olympus, and Mitutoyo objectives
• CS mount supports 1/2" CCD/CMOS sensors with screw mount, enabling direct camera integration
• Detents at integer positions for repeatable zoom settings
• Fine-adjustable device available for precise focus control
• Polarizer lens option for reducing glare on reflective surfaces

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose between monocular head with or without polarizer lens
• Select optional objectives from 0.3X to 2X to extend magnification
• Add optional CCD adapters from 0.3X to 2X for further magnification control
• Include fine-adjustable device for precise focus adjustment
• Add stage micrometer adapter for dimensional measurement
• Select 180° light path transition for upright viewing with monitor

Comparison With Other Options

Use Guide

• Set the zoom range to 0.75X first, then adjust to 5X while focusing to maintain image clarity across the range
• Use the 1X objective for standard inspection; switch to lower objectives (0.3X-0.75X) for larger field of view
• Attach the camera using the CS mount and ensure the sensor size is 1/2" to avoid vignetting
• Use the 180° light path transition when working with upright samples and a monitor for better visibility
• Enable detents at integer positions to ensure repeatable zoom settings for consistent inspection