XCAM1080P2MPA HDMI+USB SONY CMOS Microscope Camera

Key Benefits

• Dual HDMI and USB output allows real-time monitoring on a screen and image capture on a computer simultaneously
• Sony IMX385 CMOS sensor with 1/2" size and 3.75μm pixel pitch delivers high sensitivity and low dark signal
• 60fps at 1080P over HDMI enables smooth, lag-free live inspection on production lines
• 50fps at 1920x1080 over USB supports reliable image capture and analysis workflows
• SD card slot on the camera body allows local storage of video and images without a computer
• USB mouse port enables direct control of embedded XCamView software without a host PC
• 12V/1A DC power input supports continuous operation in industrial or lab environments

Application Scenarios

• PCB inspection on a production line with real-time HDMI output to a monitor for operator review
• Solder joint and component placement verification using USB capture for documentation
• Quality control tasks requiring both live observation and saved images for defect reports
• Teaching demonstrations where a live HDMI feed is shown to a class and USB captures are saved
• Research imaging with local SD card storage when a computer is not available

Who It Is For

• Electronics manufacturers performing PCB inspection and SMD assembly verification
• Quality control teams needing documented evidence of defects and measurements
• Laboratories conducting research imaging and teaching demonstrations
• Production line supervisors requiring real-time visual feedback during assembly
• Technical training centers using live video for group instruction

Problems It Solves

• A single-output camera forces a choice between live monitoring or image capture, limiting workflow flexibility
• Lack of local storage means every image must be transferred immediately, increasing risk of loss
• No direct control interface requires a computer to operate software, slowing down setup
• Low sensitivity or high dark signal leads to noisy images in low-light inspection conditions
• Incompatible connectors or power requirements make integration into existing systems difficult

Technical Features

• Sony IMX385 CMOS sensor with 1/2" optical format and 3.75μm pixel size
• HDMI output at 1080P resolution with 60fps for real-time, low-latency viewing
• USB video output at 1920x1080 resolution with 50fps for image capture and analysis
• SD card slot compliant with SDIO3.0 standard for local video and image storage
• USB mouse port for direct control of embedded XCamView software without a host PC
• DC12V power input (1A) for continuous operation in industrial environments
• LED status indicator and power on/off switch for easy monitoring and control
• Supports 1x1 binning mode for full resolution and exposure times from 0.04ms to 1000ms

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• C-mount adapter for standard 25.4mm diameter lens interface
• Option to use with different microscope bodies via C-mount
• SD card storage capacity depends on card used; no internal storage limit specified
• Firmware updates may be available through XCamView software; confirm availability

Comparison With Other Options

Use Guide

• Connect the camera to a 12V/1A power supply before powering on to ensure stable operation
• Use HDMI to connect directly to a monitor for real-time inspection with no latency
• Use USB to connect to a PC for image capture, analysis, and software control via XCamView
• Insert an SD card into the slot to store video and images locally without a computer
• Use the USB mouse port to control XCamView software directly on the camera without a host PC
• Set exposure time between 0.04ms and 1000ms depending on lighting and motion in the scene
• Ensure the C-mount adapter is properly secured to the microscope objective for stable imaging