Home
Products
Magnesite Abrasives
Magnesite Abrasives for Granite Polishing

Magnesite Abrasives

Magnesite Abrasives for Granite Polishing

Name: Magnesite Abrasives for Granite Polishing
Brand: Bello Diamond Tools
SKU: SA140MAG

Magnesite abrasive for rough granite calibration

Before graded grinding starts, granite needs rough calibrating and smoothing, and magnesite does that without loading up. Item IDs SA140MAG and SA170MAG fit automatic polishing machines.

Request A Quote Talk To An Engineer

Stone Processing
SA140MAG to SA170MAG
2 sizes listed

Magnesite Abrasives for Granite Polishing — Magnesite abrasive for rough granite calibration

Product Overview

What Magnesite Abrasives for Granite Polishing Is For

The plant specification sheet describes this tool as used for rough calibrating and smoothing for granite in the automatic polishing machine. That is exactly where it belongs, and where it stops.

The specification table lists 2 sizes, Item IDs SA140MAG to SA170MAG.

Inside Magnesite Abrasives there are 2 items to choose between. This one is the magnesite abrasive for rough granite calibration option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.

Item ID series

Ordering runs on the SA140MAG to SA170MAG series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Magnesite Abrasives for Granite Polishing — Specification table
Item ID	Length(mm)	Grit size
SA140MAG	140	#16, #24, #36, #46, #60, #120, #220, #320 #400, #800, #1000, #1500, #3000, Lux
SA170MAG	170

Product family: Stone Processing
Category: Magnesite Abrasives
Manufacturing route: Hot press.
Bond: Please inform your stone information, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Granite polishing lines
Marble slab processors

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Rough calibration with the wrong abrasive leaves marks that survive three more steps.

Magnesite Abrasives for Granite Polishing is the answer to that in the magnesite abrasives part of the range: magnesite abrasive for rough granite calibration.

Used for rough calibrating and smoothing for granite in the automatic polishing machine.

Key Benefits

Why This Version and Not Another

Hot-pressed magnesite block for rough calibrating and smoothing

Applies across the magnesite abrasives series, including this item.

140 and 170 mm fickert bases for automatic machines

Part of how this category is built.

Separate granite and marble grades

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Magnesite Abrasives holds 2 items in the programme. The difference between them is geometry and construction, not marketing.

Magnesite Abrasives for Marble Polishing — magnesite abrasive for marble polishing lines
Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling
Double Row Diamond Grinding Cup Wheel for Stone — double row cup wheel for heavier stock removal
Flower Turbo Diamond Grinding Cup Wheel for Stone — flower turbo geometry for aggressive stone grinding

See the whole magnesite abrasives category

Questions Buyers Ask

Magnesite Abrasives for Granite Polishing — Questions We Get Asked

What sizes does Magnesite Abrasives for Granite Polishing come in

The standard programme lists 2 sizes on this page, Item IDs SA140MAG to SA170MAG. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.

What do you need to quote Magnesite Abrasives for Granite Polishing

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Magnesite Abrasives for Granite Polishing

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)