- Home
- Products
- Diamond Grinding Cup Wheel
- L Segment Diamond Grinding Cup Wheel for Stone
L Segment Diamond Grinding Cup Wheel for Stone
L segments silver-brazed for side grinding
L-shaped segments are for grinding into a corner where a flat face cannot reach, and the silver braze holds them against that side load. Item IDs SA105SLSW-SA180LSW.
What L Segment Diamond Grinding Cup Wheel for Stone Is For
The plant specification sheet describes this tool as for smooth and fast grinding granite, marble, and other natural stones. That is exactly where it belongs, and where it stops.
The specification table lists 6 sizes, Item IDs SA105SLSW to SA180LS W.
Inside Diamond Grinding Cup Wheel there are 12 items to choose between. This one is the l segments silver-brazed for side grinding option — the comparison further down this page sets it against the others.
How It Is Built
Manufacturing route
High frequency weld(silver braze). This is what holds the diamond in place under working load.
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.
Item ID series
Ordering runs on the SA105SLSW to SA180LS W series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes and specifications are available upon request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | |
|---|---|---|---|---|
| mm | inch | mm/inch | thickness (mm) | |
| SA105SLSW | 105 | 4" | 20.00/ 0.787"/ M14/M16 | 5 |
| SA115LS W | 125 | 4.5" | 22.23/ 0.875" /M16 | 5 |
| SA125LS W | 125 | 5" | 22.23/ 0.875" /M16 | 5 |
| SA150LS W | 150 | 6" | 22.23/ 0.875" /M16 | 5 |
| SA180LS W | 180 | 7" | 22.23/ 0.875" /M16 | 5 |
- Product family
- Stone Processing
- Category
- Diamond Grinding Cup Wheel
- Manufacturing route
- High frequency weld(silver braze).
- Bond
- Please inform your stone information, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Countertop and worktop fabricators
- Stone shops preparing surfaces before polishing
- Monument workshops
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Grinding a slab flat without leaving swirl marks is the slowest step in most fabrication shops.
L Segment Diamond Grinding Cup Wheel for Stone is the answer to that in the diamond grinding cup wheel part of the range: l segments silver-brazed for side grinding.
For smooth and fast grinding granite, marble, and other natural stones.
Why This Version and Not Another
Twelve segment geometries so the wheel matches the stone and the stock removal
Applies across the diamond grinding cup wheel series, including this item.
High-frequency welded and sintered versions of the same size
Part of how this category is built.
Dia 105-230 mm on 20 and 22.23 mm bores
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Diamond Grinding Cup Wheel holds 12 items in the programme. The difference between them is geometry and construction, not marketing.
- Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
- Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
- Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling
- Double Row Diamond Grinding Cup Wheel for Stone — double row cup wheel for heavier stock removal
- Flower Turbo Diamond Grinding Cup Wheel for Stone — flower turbo geometry for aggressive stone grinding
- Resin Filled Diamond Grinding Cup Wheel for Stone — resin-filled wheel for a finer ground surface
L Segment Diamond Grinding Cup Wheel for Stone — Questions We Get Asked
What sizes does L Segment Diamond Grinding Cup Wheel for Stone come in
The standard programme lists 6 sizes on this page, Item IDs SA105SLSW to SA180LS W. Other sizes and specifications are available upon request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.
What do you need to quote L Segment Diamond Grinding Cup Wheel for Stone
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for L Segment Diamond Grinding Cup Wheel for Stone
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Arrow Segment Diamond Grinding Cup Wheel for Stone
Arrow segments for fast stock removal on stone
View specifications →
Continuous Rim Diamond Grinding Cup Wheel for Stone
Continuous rim for the smoothest ground surface
View specifications →
Continuous Rim Diamond Grinding Cup Wheel with Slot
Slotted continuous rim balancing finish and cooling
View specifications →
Double Row Diamond Grinding Cup Wheel for Stone
Double row cup wheel for heavier stock removal
View specifications →
Flower Turbo Diamond Grinding Cup Wheel for Stone
Flower turbo geometry for aggressive stone grinding
View specifications →
Resin Filled Diamond Grinding Cup Wheel for Stone
Resin-filled wheel for a finer ground surface
View specifications →
Single Row Diamond Grinding Cup Wheel for Stone
Single row cup wheel for controlled grinding
View specifications →
Straight Turbo Diamond Grinding Cup Wheel for Stone
Straight turbo profile for even grinding on stone
View specifications →Related Technical Guides
Get a quote for L Segment Diamond Grinding Cup Wheel for Stone
Send the material, machine and size. You will get a specification and a price, not a catalogue page.