Home
Products
Flexible Diamond Pad
Flexible Diamond Polishing Buff

Flexible Diamond Pad

Flexible Diamond Polishing Buff

Name: Flexible Diamond Polishing Buff
Brand: Bello Diamond Tools
SKU: SA75DB

Finish buff closing out the flexible pad sequence

After the pad ladder has taken the scratches out, the buff is what brings the gloss up. Item IDs SA75DB-SA125DPB match the pad sizes so the sequence stays on one machine.

Request A Quote Talk To An Engineer

Stone Processing
SA75DB to SA125DPB
4 sizes listed

Flexible Diamond Polishing Buff — Finish buff closing out the flexible pad sequence

Product Overview

What Flexible Diamond Polishing Buff Is For

The plant specification sheet describes this tool as used for finish polishing on special surfaces of natural stone and artificial stone. That is exactly where it belongs, and where it stops.

The specification table lists 4 sizes, Item IDs SA75DB to SA125DPB.

Inside Flexible Diamond Pad there are 3 items to choose between. This one is the finish buff closing out the flexible pad sequence option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Manufacturing route

Hot press. This is what holds the diamond in place under working load.

Bond selected per enquiry

We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.

Item ID series

Ordering runs on the SA75DB to SA125DPB series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

Flexible Diamond Polishing Buff — Specification table
Item ID	Diameter	Thickness	Grit size
mm	inch	mm
SA75DB	75	3	3	buff(black&white)
SA100DB	100	4	3
SA125DPB	125	5	3

Product family: Stone Processing
Category: Flexible Diamond Pad
Manufacturing route: Hot press.
Bond: Please inform your stone information, we will choose the best bonding for you.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Fabricators finishing edges and profiles
Restoration crews polishing installed stone
Countertop installers doing on-site repair

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Curved and profiled surfaces cannot be polished with rigid tooling.

Flexible Diamond Polishing Buff is the answer to that in the flexible diamond pad part of the range: finish buff closing out the flexible pad sequence.

Used for finish polishing on special surfaces of natural stone and artificial stone.

Key Benefits

Why This Version and Not Another

Separate wet and dry series rather than one pad for both

Applies across the flexible diamond pad series, including this item.

75-125 mm hook-and-loop backing for hand machines

Part of how this category is built.

Finish buff in the same series to close out the sequence

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Flexible Diamond Pad holds 3 items in the programme. The difference between them is geometry and construction, not marketing.

Flexible Diamond Pad for Dry Polishing — dry flexible pads for on-site stone polishing
Flexible Diamond Pad for Wet Polishing — wet flexible pads for shaped stone surfaces
Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling
Double Row Diamond Grinding Cup Wheel for Stone — double row cup wheel for heavier stock removal

See the whole flexible diamond pad category

Questions Buyers Ask

Flexible Diamond Polishing Buff — Questions We Get Asked

What sizes does Flexible Diamond Polishing Buff come in

The standard programme lists 4 sizes on this page, Item IDs SA75DB to SA125DPB. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.

What do you need to quote Flexible Diamond Polishing Buff

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for Flexible Diamond Polishing Buff

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)