- Home
- Products
- Edge Cutting Diamond Blade
- Edge Cutting Diamond Blade for Granite
Edge Cutting Diamond Blade for Granite
Bridge-saw blade with a granite-specific matrix
Granite needs a harder matrix than marble or the segment wears away before the diamond is used. Item IDs SA250ECG-SA800ECG cover the standard bridge-saw range for chip-free sizing cuts.
What Edge Cutting Diamond Blade for Granite Is For
The plant specification sheet describes this tool as for smooth and fast cutting granite without chipping. That is exactly where it belongs, and where it stops.
The specification table lists 12 sizes, Item IDs SA250ECG to SA800ECG.
Steel body: normal style and silent style are available.
Inside Edge Cutting Diamond Blade there are 2 items to choose between. This one is the bridge-saw blade with a granite-specific matrix option — the comparison further down this page sets it against the others.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.
Item ID series
Ordering runs on the SA250ECG to SA800ECG series, so repeat orders return the same specification.
Sizes beyond the standard list
Wet cutting only, other sizes are available upon request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | ||||
|---|---|---|---|---|---|---|---|
| mm | inch | mm | Length(mm) | Thickness(mm) | Height (mm) | Number(pc) | |
| SA250ECG | 250 | 10 | 50/60 | 40 | 2.8/3.0 | 10/12/15/20 | 17 |
| SA300ECG | 300 | 12 | 50/60 | 40 | 3.0/3.2 | 10/12/15/20 | 21 |
| SA350ECG | 350 | 14 | 50/60 | 40/20 | 3.0/3.2 | 10/12/15/20 | 24 |
| SA400ECG | 400 | 16 | 50/60 | 40/20 | 3.4/3.6 | 10/12/15/20 | 28 |
| SA450ECG | 450 | 18 | 50/60 | 40/20 | 3.8/4.0 | 10/12/15/20 | 32 |
| SA500ECG | 500 | 20 | 50/60 | 40/20 | 3.8/4.0 | 10/12/15/20 | 30/36 |
| SA550ECG | 550 | 22 | 50/60 | 40/20 | 4.0/4.6 | 10/12/15/20 | 32/40 |
| SA600ECG | 600 | 24 | 50/60 | 40/20 | 4.6/4.8 | 10/12/15/20 | 36/42 |
| SA650ECG | 650 | 26 | 50/60 | 40/20 | 5.0/5.2 | 10/12/15/20 | 40/46 |
| SA700ECG | 700 | 28 | 50/60 | 40/20 | 5.0/5.2 | 10/12/15/20 | 42/50 |
| SA800ECG | 800 | 32 | 50/60 | 40/20 | 5.5 | 10/12/15/20 | 46/57 |
- Product family
- Stone Processing
- Category
- Edge Cutting Diamond Blade
- Bond
- Please inform your stone information, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Slab fabricators running bridge and CNC saws
- Kitchen worktop producers
- Stone traders cutting to size before shipment
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
A slab cut with the wrong bond chips along the top edge and the whole piece is scrap.
Edge Cutting Diamond Blade for Granite is the answer to that in the edge cutting diamond blade part of the range: bridge-saw blade with a granite-specific matrix.
For smooth and fast cutting granite without chipping.
Why This Version and Not Another
Separate granite and marble bonds instead of a single compromise blade
Applies across the edge cutting diamond blade series, including this item.
Item IDs SA250ECG-SA800ECG cover the standard bridge-saw range
Part of how this category is built.
Segment height chosen for the cutting depth you actually use
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Edge Cutting Diamond Blade holds 2 items in the programme. The difference between them is geometry and construction, not marketing.
- Edge Cutting Diamond Blade for Marble — bridge-saw blade with a free-cutting marble bond
- Arrow Segment Diamond Grinding Cup Wheel for Stone — arrow segments for fast stock removal on stone
- Continuous Rim Diamond Grinding Cup Wheel for Stone — continuous rim for the smoothest ground surface
- Continuous Rim Diamond Grinding Cup Wheel with Slot — slotted continuous rim balancing finish and cooling
- Double Row Diamond Grinding Cup Wheel for Stone — double row cup wheel for heavier stock removal
- Flower Turbo Diamond Grinding Cup Wheel for Stone — flower turbo geometry for aggressive stone grinding
Edge Cutting Diamond Blade for Granite — Questions We Get Asked
What sizes does Edge Cutting Diamond Blade for Granite come in
The standard programme lists 12 sizes on this page, Item IDs SA250ECG to SA800ECG. Wet cutting only, other sizes are available upon request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.
Can Edge Cutting Diamond Blade for Granite be used dry
No. This item is specified for wet use, and running it dry will cost you the segments and possibly the core. For dry work see the vacuum brazed programme.
What do you need to quote Edge Cutting Diamond Blade for Granite
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Edge Cutting Diamond Blade for Granite
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Edge Cutting Diamond Blade for Marble
Bridge-saw blade with a free-cutting marble bond
View specifications →
Arrow Segment Diamond Grinding Cup Wheel for Stone
Arrow segments for fast stock removal on stone
View specifications →
Continuous Rim Diamond Grinding Cup Wheel for Stone
Continuous rim for the smoothest ground surface
View specifications →
Continuous Rim Diamond Grinding Cup Wheel with Slot
Slotted continuous rim balancing finish and cooling
View specifications →
Double Row Diamond Grinding Cup Wheel for Stone
Double row cup wheel for heavier stock removal
View specifications →
Flower Turbo Diamond Grinding Cup Wheel for Stone
Flower turbo geometry for aggressive stone grinding
View specifications →
L Segment Diamond Grinding Cup Wheel for Stone
L segments silver-brazed for side grinding
View specifications →
Resin Filled Diamond Grinding Cup Wheel for Stone
Resin-filled wheel for a finer ground surface
View specifications →Related Technical Guides
Get a quote for Edge Cutting Diamond Blade for Granite
Send the material, machine and size. You will get a specification and a price, not a catalogue page.