- Home
- Products
- Diamond Blades for Glass
- Continuous Rim Diamond Balde for Glass
Continuous Rim Diamond Balde for Glass
Closed rim for chip-free glass cutting
Glass shows every fault at the edge, which is why a closed rim is the default for flat glass cutting. Item IDs GA80CR-GA350CR cover shop and line machines.
What Continuous Rim Diamond Balde for Glass Is For
The plant specification sheet describes this tool as for smooth, fast and chip-free cutting glass. That is exactly where it belongs, and where it stops.
The specification table lists 10 sizes, Item IDs GA80CR to GA350CR.
Inside Diamond Blades for Glass there are 2 items to choose between. This one is the closed rim for chip-free glass cutting option — the comparison further down this page sets it against the others.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform your glass information, we will choose the best bonding for you.
Item ID series
Ordering runs on the GA80CR to GA350CR series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter(mm) | Segment | |
|---|---|---|---|
| Height(mm) | Thickness(mm) | ||
| GA80CR | 80 | 5/6/7/8 | 1.5 |
| GA105CR | 105 | 5/6/7/8 | 1.8 |
| GA110CR | 110 | 5/6/7/8 | 1.8 |
| GA125CR | 125 | 5/6/7/8 | 1.9 |
| GA150CR | 150 | 7/8 | 1.9 |
| GA200CR | 200 | 7/8 | 2.2 |
| GA250CR | 250 | 7/8 | 2.2 |
| GA300CR | 300 | 7/8 | 2.4 |
| GA350CR | 350 | 7/8 | 2.4 |
- Product family
- Glass Processing
- Category
- Diamond Blades for Glass
- Bond
- Please inform your glass information, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Flat glass processors
- Laminated glass producers
- Automotive and furniture glass shops
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Glass cutting faults are not visible until the edge is polished, and then the sheet is scrap.
Continuous Rim Diamond Balde for Glass is the answer to that in the diamond blades for glass part of the range: closed rim for chip-free glass cutting.
For smooth, fast and chip-free cutting glass.
Why This Version and Not Another
Continuous rim for chip-free cutting, segmented for thicker and laminated work
Applies across the diamond blades for glass series, including this item.
Dia 80-350 mm across the two series
Part of how this category is built.
Bond set for the glass type you run
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Diamond Blades for Glass holds 2 items in the programme. The difference between them is geometry and construction, not marketing.
- Segmented Diamond Blade for Glass — segmented blade for laminated glass
- 10S Polishing Wheels — 10s wheels for fine grinding before polishing
- BD Polishing Wheels — bd wheels for fine glass polishing
- BK Polishing Wheels — bk wheels for first and second glass polishing
- Wool Felt Polishing Wheels — wool felt wheels for high gloss with cerium oxide
- Metal Bond Diamond Wheel for Bevelling Machine — bevelling wheels that clear grinding scraps
Continuous Rim Diamond Balde for Glass — Questions We Get Asked
What sizes does Continuous Rim Diamond Balde for Glass come in
The standard programme lists 10 sizes on this page, Item IDs GA80CR to GA350CR. Other sizes are available upon request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform your glass information, we will choose the best bonding for you.
What do you need to quote Continuous Rim Diamond Balde for Glass
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Continuous Rim Diamond Balde for Glass
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Segmented Diamond Blade for Glass
Segmented blade for laminated glass
View specifications →
10S Polishing Wheels
10S wheels for fine grinding before polishing
View specifications →
BD Polishing Wheels
BD wheels for fine glass polishing
View specifications →
BK Polishing Wheels
BK wheels for first and second glass polishing
View specifications →
Wool Felt Polishing Wheels
Wool felt wheels for high gloss with cerium oxide
View specifications →
Metal Bond Diamond Wheel for Bevelling Machine
Bevelling wheels that clear grinding scraps
View specifications →
Metal Bond Diamond Wheel for Double Edging Machine
Double edger wheels for rough grinding and chamfering
View specifications →
Metal Bond Diamond Wheel for Special Shape Edging Machine
Shaped edging wheels for architectural and auto glass
View specifications →Related Technical Guides
Get a quote for Continuous Rim Diamond Balde for Glass
Send the material, machine and size. You will get a specification and a price, not a catalogue page.