- Home
- Products
- Small Diamond Saw Blades
- Continuous Rim Blade for Stone
Continuous Rim Blade for Stone
Chip-free rim for marble limestone and slate
A continuous rim leaves no segment gap to slam against the stone, so the cut edge comes out clean enough to polish directly. It is the blade to reach for on marble, limestone, sandstone and slate where an edge chip means scrap.
What Continuous Rim Blade for Stone Is For
The plant specification sheet describes this tool as for smooth and fast cutting granite, marble, sandstone, slate, limestone and other natural stones. That is exactly where it belongs, and where it stops.
The specification table lists 9 sizes, Item IDs SA105CR to SA230CR.
Inside Small Diamond Saw Blades there are 10 items to choose between. This one is the chip-free rim for marble limestone and slate option — the comparison further down this page sets it against the others.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform your stone information, we will choose the best bonding for you.
Item ID series
Ordering runs on the SA105CR to SA230CR series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | ||
|---|---|---|---|---|---|
| mm | inch | mm/inch | thickness (mm) | height (mm) | |
| SA105CR | 105 | 4" | 20.00/ 0.787" | 1.6 | 7 |
| SA110CR | 110 | 4.3" | 20.00/ 0.787" | 1.6 | 7 |
| SA115CR | 115 | 4.5" | 22.23/ 0.875" | 1.6 | 7 |
| SA125CR | 125 | 5" | 22.23/ 0.875" | 1.8 | 7 |
| SA150CR | 150 | 6" | 22.23/ 0.875" | 1.8 | 7 |
| SA180CR | 180 | 7" | 22.23/ 0.875" | 1.8 | 7 |
| SA200CR | 200 | 8" | 22.23/ 0.875" | 2.0 | 7 |
| SA230CR | 230 | 9" | 22.23/ 0.875" | 2.2 | 7 |
- Product family
- Stone Processing
- Category
- Small Diamond Saw Blades
- Bond
- Please inform your stone information, we will choose the best bonding for you.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Stone fabrication shops running 105-230 mm angle grinders
- Tile and stone retailers stocking their own blade programme
- Blade brands looking for a private-label source
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Fabricators lose slab yield to chipped edges and blades that stop cutting after a few square metres.
Continuous Rim Blade for Stone is the answer to that in the small diamond saw blades part of the range: chip-free rim for marble limestone and slate.
For smooth and fast cutting granite, marble, sandstone, slate, limestone and other natural stones.
Why This Version and Not Another
Rim geometry chosen per stone type instead of one blade sold for everything
Applies across the small diamond saw blades series, including this item.
Protection segments and reinforced cores on the dry-cutting versions
Part of how this category is built.
One Item ID series covers 105-230 mm so a distributor can stock a full ladder
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Small Diamond Saw Blades holds 10 items in the programme. The difference between them is geometry and construction, not marketing.
- Deep Teeth Diamond Blade — deep teeth with protection segments for hard stone
- High Segment Continuous Blade — tall continuous segment for long service life
- High Segment Turbo Diamond Blade — tall turbo segment for long life and fast cutting
- High Segmented Diamond Blade — tall segments for heavy daily stone cutting
- Segmented Diamond Blade for Stone — segmented rim for faster cutting in hard natural stone
- Thin Turbo Diamond Saw Blade for Stone — thin kerf turbo blade for low-loss cutting
Continuous Rim Blade for Stone — Questions We Get Asked
What sizes does Continuous Rim Blade for Stone come in
The standard programme lists 9 sizes on this page, Item IDs SA105CR to SA230CR. Other sizes are available upon request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform your stone information, we will choose the best bonding for you.
What do you need to quote Continuous Rim Blade for Stone
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Continuous Rim Blade for Stone
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Deep Teeth Diamond Blade
Deep teeth with protection segments for hard stone
View specifications →
High Segment Continuous Blade
Tall continuous segment for long service life
View specifications →
High Segment Turbo Diamond Blade
Tall turbo segment for long life and fast cutting
View specifications →
High Segmented Diamond Blade
Tall segments for heavy daily stone cutting
View specifications →
Segmented Diamond Blade for Stone
Segmented rim for faster cutting in hard natural stone
View specifications →
Thin Turbo Diamond Saw Blade for Stone
Thin kerf turbo blade for low-loss cutting
View specifications →
Turbo Diamond Saw Blade for Stone
Turbo rim for fast dry-tolerant cutting in stone
View specifications →
Turbo Segmented Diamond Blade
Turbo segments combining speed with edge control
View specifications →Related Technical Guides
Get a quote for Continuous Rim Blade for Stone
Send the material, machine and size. You will get a specification and a price, not a catalogue page.