PVC Wrapping Tape supplied by Avans Tech

PVC Tapes And Films

PVC Wrapping Tape

Name: PVC Wrapping Tape
Brand: Avans Tech

PVC Wrapping Tape is supplied in two builds. The non-adhesive phase colour tape 1822 is 0.18 mm by 22 mm by 15 m in lead-free AAA-grade PVC film for harness winding and phase marking, withstanding 5000 V. The adhesive version 1522 is 0.15 mm by 45 mm by 22 m with a rubber-based pressure-sensitive adhesive for sealing and surface protection.

Request A Quote On WhatsApp Email An Inquiry

ISO 9001:2015 production Samples available Small orders accepted

Product Overview

PVC Wrapping Tape is supplied in two builds. The non-adhesive phase colour tape 1822 is 0.18 mm by 22 mm by 15 m in lead-free AAA-grade PVC film for harness winding and phase marking, withstanding 5000 V. The adhesive version 1522 is 0.15 mm by 45 mm by 22 m with a rubber-based pressure-sensitive adhesive for sealing and surface protection.

Materials

AAA-grade lead-free PVC film
Calendered PVC film
Rubber-based pressure-sensitive adhesive on the 1522 build

Key Benefits

Non-adhesive phase colour build leaves no glue inside a harness
Withstand voltage of 5000 V and dielectric strength of 40 KV/mm on the 0.18 mm build
Lead-free AAA-grade PVC film for buyers with restricted-substance requirements
Adhesive 1522 build tears by hand with no tools and no residual adhesive
Aging and cold resistant so harnesses stay marked over the life of the assembly

Application Scenarios And Who It Is For

Application Scenarios

Wiring harness winding and wrapping
Electrical insulation below 600 V
Phase colour marking for wires and cables
Binding and fixing in industry, agriculture and engineering work
Sealing medium and light cartons
Surface protection for furniture and electronics
Printed identification and masking of doors or windows

Who It Is For

Harness makers and panel builders
Electrical contractors doing phase identification
Packaging and assembly operations buying sealing tape
Distributors serving electrical and MRO customers

Problems It Solves

Adhesive bleeding inside harnesses and gumming up later rework
Phase marking that fades or peels before the installation is commissioned
Tape that needs a knife to cut, slowing down repetitive wrapping
Cold-weather cracking on tape used in unheated plant

Technical Features

Non-adhesive build 0.18 mm: tensile 24 N/cm, elongation 200 percent, dielectric strength 40 KV/mm, breakdown voltage 6500 V
Adhesive build 0.15 mm: tensile 180 percent value, elongation 150 percent, peel strength 1.5 N/cm
Adhesion 0.4 kg/25 mm on the adhesive build
Temperature rating 0 to 80 degrees C on the adhesive build
Calendered PVC film with rubber-based pressure-sensitive adhesive on the 1522 build

Specifications

Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.

Model 1822 Non-Adhesive	0.18 mm x 22 mm x 15 m, outer diameter 73 mm
Model 1522 Adhesive	0.15 mm x 45 mm x 22 m
Withstand Voltage	5000 V
Breakdown Voltage	6500 V on 0.18 mm
Dielectric Strength	40 KV/mm on 0.18 mm
Tensile Strength	24 N/cm on 0.18 mm
Elongation	200 percent on 0.18 mm and 150 percent on 0.15 mm
Peel Strength	1.5 N/cm on 0.15 mm
Adhesion	0.4 kg/25 mm on 0.15 mm
Temperature Rating	0 to 80 degrees C on 0.15 mm
Insulation Use	below 600 V
Shelf Life	12 months from production date

Quality Control

Withstand voltage and breakdown voltage tested on the non-adhesive build
Peel strength and adhesion tested on the adhesive build
Thickness and width verified against the model code
Published values are general averages; confirm against testing for your application

Customization Options

Colour sets for phase marking schemes
Roll width and length on request
Printed surface on the adhesive build for product identification

Comparison With Other Products

Compared With	Why This Product
PVC Wiring Tape	Wrapping tape 1822 is non-adhesive for clean harness colour coding rather than for taping conductors
PVC Warning Tape	Warning tape is a wide floor and hazard marking product, not a harness consumable

Use Guide

For phase colour tape connect the wires first, wrap the colour band around the area, cut off the excess and secure the outer layer with electrical tape
For the adhesive build clean the surface before application
Wrap semi-overlapping with enough tension to keep the wrap uniform
Do not over-stretch the last layer to avoid curling

Questions Buyers Ask

PVC Wrapping Tape FAQ

What is the difference between the two builds

Model 1822 is a non-adhesive phase colour tape at 0.18 mm x 22 mm x 15 m. Model 1522 is an adhesive tape at 0.15 mm x 45 mm x 22 m for sealing and protection.

What voltage can the phase colour tape withstand

Withstand voltage is 5000 V with breakdown voltage of 6500 V and dielectric strength of 40 KV/mm. It is listed for electrical insulation use below 600 V.

Is the PVC lead free

The phase colour tape is made from AAA-grade PVC film described as lead-free and environmentally friendly.

Do you supply colour sets

Yes. Tell us the colours and roll counts for your phase marking scheme on WhatsApp.

What is the temperature rating

The 0.15 mm adhesive build is rated 0 to 80 degrees C.

Can I order a trial quantity

Yes. Small order quantities are available and free samples can be sent for evaluation.