PVC Tapes And Films
PVC Wiring Tape
PVC Wiring Tape is a thin matte-surface harness film at 0.10 mm, supplied as flame-retardant and cold-resistant builds in 17 mm 19 mm and 24 mm widths. A separate DINP-plasticized automotive build is offered in 95, 105 and 115 micron with an 85 degrees C rating and ROHS 2.0 compliance for vehicle harness winding.
ISO 9001:2015 production Samples available Small orders accepted
Product Overview
PVC Wiring Tape is a thin matte-surface harness film at 0.10 mm, supplied as flame-retardant and cold-resistant builds in 17 mm 19 mm and 24 mm widths. A separate DINP-plasticized automotive build is offered in 95, 105 and 115 micron with an 85 degrees C rating and ROHS 2.0 compliance for vehicle harness winding.
Materials
- Matte-surface PVC film
- DINP plasticized PVC film on the automotive build
- High-performance pressure-sensitive adhesive
Certifications
- ROHS 2.0 Directive on the automotive harness build
Key Benefits
- Thin 0.10 mm film keeps bundle diameter down where harnesses run through tight routing
- Tears by hand so operators wrap without knives on the line
- Dielectric strength 40 KV/mm and breakdown voltage 5000 V
- Automotive build rated 85 degrees C and compliant with the ROHS 2.0 Directive
- 24 month shelf life for buyers holding harness consumables in stock
Application Scenarios And Who It Is For
Application Scenarios
- Insulation for wire or cable joints under 600 V and 80 degrees C
- Phase colour identification and protective sheathing
- Fixed bundling and harness wrapping for automotive and motorcycle repair
- Copper tube wrapping
- Automotive harness winding and bundling at 85 degrees C
Who It Is For
- Automotive and motorcycle harness manufacturers
- Vehicle repair and rewiring workshops
- Panel builders and electrical assemblers
- Distributors serving automotive electrical trade
Problems It Solves
- Thick tape adding diameter to a bundle that has to pass through a grommet
- Tape that softens near an engine bay and unwinds in service
- Cold-store and winter assembly where standard tape loses adhesion
- Restricted-substance requirements from automotive customers
Technical Features
- Total thickness 0.10 mm with tensile strength 14 N/cm and elongation 150 percent
- Peel strength 1.6 N/cm and adhesion 0.32 kg/25 mm
- Dielectric strength 40 KV/mm and breakdown voltage 5000 V
- Automotive build 95 micron 14 N/cm 130 percent, 105 micron 15 N/cm 140 percent, 115 micron 16 N/cm 150 percent, all peel 1.5 N/cm at 85 degrees C
- Matte surface with flame-retardant or cold-resistant variants
Specifications
Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.
| PWT 1020AFR | 0.10 mm x 17 mm x 17 m, outer diameter 63.5 mm, matte flame retardant |
|---|---|
| PWT 1020AFR wide | 0.10 mm x 24 mm x 17 m, outer diameter 63.5 mm, matte flame retardant |
| PWT 1025 | 0.10 mm x 19 mm x 25 m, outer diameter 69 mm, matte cold resistant |
| PWT 1030 | 0.10 mm x 19 mm x 30 m, outer diameter 74 mm, matte cold resistant |
| Tensile Strength | 14 N/cm |
| Elongation | 150 percent |
| Peel Strength | 1.6 N/cm |
| Adhesion | 0.32 kg/25 mm |
| Dielectric Strength | 40 KV/mm |
| Breakdown Voltage | 5000 V |
| Automotive Build Thicknesses | 95 micron 105 micron 115 micron |
| Automotive Temperature Rating | 85 degrees C |
| Compliance | ROHS 2.0 Directive on the automotive build |
| Shelf Life | 24 months from production date |
Quality Control
- Thickness held at 0.10 mm or the stated micron value for the automotive build
- Tensile, elongation and peel strength tested per build
- Dielectric strength and breakdown voltage verified
- Published data are general averages and should be confirmed by testing in your application
Customization Options
- Width and roll length combinations from the model list
- Colour sets for phase identification
- B-type surface option on the automotive build
Comparison With Other Products
| Compared With | Why This Product |
|---|---|
| PVC Flame Retardant Electrical Tape | Wiring tape is a thinner 0.10 mm harness film where bundle diameter matters more than tape strength |
| PVC Wrapping Tape 1822 | Wiring tape is adhesive-backed for joints and bundling rather than a non-adhesive colour band |
Use Guide
- Clean the application area to remove grease dust and moisture
- Wrap semi-overlapping with even tension
- Do not over-stretch the last layer to prevent curling
- Store indoors at room temperature, ventilated and shaded
Questions Buyers Ask
PVC Wiring Tape FAQ
What temperature rating does the automotive build carry
The DINP-plasticized automotive harness build is rated 85 degrees C. The standard wiring tape is listed for joints under 80 degrees C and 600 V.
Is the tape ROHS compliant
The automotive wire harness build is stated as compliant with the ROHS 2.0 Directive.
Which widths are available
17 mm, 19 mm and 24 mm in the standard builds, with roll lengths of 17 m, 25 m and 30 m by model.
Do you offer a cold-resistant version
Yes. PWT 1025 and PWT 1030 are the matte cold-resistant models. For colder service also look at our cold-resistant electrical tape range.
What is the shelf life
24 months from the production date under indoor room-temperature storage.
Can I get samples of several models
Yes. List the model codes you want to trial on WhatsApp and we will send samples.
Related
Related Products And Pages
PVC Warning Tape
PVC Warning Tape is a plasticized PVC film coated with a pressure-sensitive adhesive, supplied in 0.13 mm and 0.15 mm thicknesses...
View Specifications
Self-Adhesive Fireproof Wrapping Tape
Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to...
View Specifications
Waterproof Insulating Composite Tape
Waterproof Insulating Composite Tape model FSD-77 is a 1.65 mm by 50 mm by 3 m tape rated for 35 KV insulation protection. It...
View Specifications
Aluminum Protective Film
Aluminum Protective Film is a soft PVC film coated with a rubber-based sensitive adhesive, supplied in 0.12 mm and 0.20 mm and...
View SpecificationsRelated Industries
Related Articles
Ask About PVC Wiring Tape
Send the model, quantity and destination port and we will reply with a quotation, packing detail and lead time.