Tyre Service Bay
A changer and a balancer matched to the wheels you actually handle, so rim damage and lifting injuries stop being routine.
Swing Column · Model ATC812S
ATC812S Tire Changer Dual Cylinders
Dual cylinder assistant arm on a swing column
Product Overview
ATC812S is a swing column tyre changer with a dual cylinder assistant arm. Two cylinders give the arm more control on wide tyres and high aspect ratios, which shortens the mounting cycle on the sizes that normally cost the most time. A side-mounted inflation pedal keeps the operator in one working position.
Key Benefits
What This Machine Changes in the Bay
- Dual cylinder assistant arm speeds up wide tyres and high aspect ratio fitments
- Swing column keeps the machine footprint compact in a narrow bay
- Big aluminium cylinder prevents rust and extends service life
- Side-position inflation pedal keeps the operator at the wheel
- Special alloy mounting head with life-time free service
Application Scenarios
- Wide tyres and high aspect ratio fitments on SUVs and light commercials
- Narrow bays where a tilting column would not fit comfortably
- Mixed passenger and light commercial tyre work
- Workshops fitting a broad range of rim widths
Who It Is For
- Tyre shops handling a wide size range in limited floor space
- Workshops upgrading from a basic swing column machine
- Service chains fitting compact bays
- Distributors supplying equipment where bay space is tight
Problems It Solves
What It Stops Costing You
- Single cylinder assistant arms lose control on wide, stiff tyres
- Tilting column machines need more clear space than some bays have
- Steel cylinders corrode in wet tyre bays and start to leak
- Walking to a remote inflation control breaks the working rhythm
Technical Features
- Swing column design
- Dual cylinder assistant arm system
- Big aluminium cylinder for rust resistance
- Tyre inflation pedal in the side position
- Mounting head in special alloys with life-time free service
Specifications
A dimension and specification table for this model is available on request. Send us the model number and we will email the current data sheet.
Compared With Other Models
- Against the ATC811: two cylinders instead of one on the assistant arm, for better control on wide tyres
- Against the ATC810: adds the assistant arm system entirely
- Against a tilting column machine: a smaller working envelope for the same tyre sizes
Use Guide
- Connect shop air and confirm the working pressure
- Clamp the wheel and swing the column into position
- Use the dual cylinder arm to hold the sidewall on wide or stiff tyres
- Inflate using the side pedal without leaving the wheel
Quality and Support
What Comes With the Machine
Quality Assurance
Every product is supplied with a long warranty assurance.
Expert Guidance
Pre-sales and after-sales teams give professional guidance and aftersales support.
Reliability
Consistent and reliable performance across every product line.
Innovation
An experienced R&D team develops the products the market asks for.
Customization. Machines are built to your local voltage and frequency, and optional equipment is listed on the quotation. Send us your requirement and we will confirm what can be changed before you order.
Bay Solutions Using This Machine
ATC812S Questions Buyers Ask
What does the second cylinder add?
It gives the assistant arm more control, which saves time on tyres with a larger width and aspect ratio.
How much floor space does a swing column machine need?
Less clear space than a tilting column machine of the same capacity. Send us your bay dimensions and we will confirm the layout.
Where is the inflation control?
On a side-position pedal, so the operator stays at the wheel.
Is the cylinder protected against corrosion?
A big aluminium cylinder is used to prevent rust and extend service life.
What warranty applies to the mounting head?
The special alloy mounting head is covered by life-time free service.
Can you supply matching balancing equipment?
Yes. Tell us your wheel range and we will quote the changer and balancer as one bay package.
Related Products
Swing Column
ATC811 Tire Changer With Assistant Arm
Swing column changer for sports and run-flat tyres
Tilting Column
ATC880S Fully Automatic Tire Changer Without Turntable & Crowbar
Leverless tyre changing up to 24 inches
Tilting Column
ATC860S Tire Changer with Tire Lifting System
Tilting column changer with pneumatic wheel lift
Related Guides
How to Choose a Tyre Changer for Your Wheel Mix
Assistant arm, tyre lifter, leverless. Each answers a different problem, and the right answer comes from the wheels you actually handle rather than the machine specification sheet.
Download the Catalogue
Tyre Maintenance Catalog 2024 V1.1
Tyre changers, wheel balancers and wheel aligners across the ATC, AWB and WA ranges.
Download PDF (5415 KB)Request a Quotation for the ATC812S
Tell us the quantity, your local voltage and the destination port and we will send a price with crate dimensions and lead time.