Tyre Service Bay
A changer and a balancer matched to the wheels you actually handle, so rim damage and lifting injuries stop being routine.
Tilting Column · Model ATC880S
ATC880S Fully Automatic Tire Changer Without Turntable & Crowbar
Leverless tyre changing up to 24 inches
Product Overview
ATC880S is a fully automatic tyre changer that works without a turntable and without a crowbar, so the rim is never levered against. The mounting head sets its own gap to the rim and locks twice, and a pneumatic tyre lifting system takes the weight of heavy wheels. It handles mounting and dismounting up to 24 inches.
Key Benefits
What This Machine Changes in the Bay
- No crowbar contact with the rim, which protects alloy and painted wheels from lever marks
- Automatic gap adjustment with double locking keeps the mounting head off the rim edge
- Pneumatic tyre lifting system removes the manual lift on heavy-duty wheels
- Assistant arm speeds up low profile and run-flat tyres that resist by hand
- Special alloy mounting head is supported by life-time free service
Application Scenarios
- Alloy and painted wheels where lever damage leads to customer claims
- Low profile and run-flat tyres on premium vehicles
- Heavy SUV and light commercial wheels that are awkward to lift
- High-volume seasonal tyre changeover
Who It Is For
- Tyre retailers handling premium and alloy wheels
- Workshops whose technicians are exposed to repeated manual wheel lifting
- Fast-fit chains standardising on a leverless procedure
- Distributors supplying equipment to performance and premium tyre shops
Problems It Solves
What It Stops Costing You
- Lever marks on alloy rims turn into refinishing costs and disputed invoices
- Run-flat and low profile sidewalls fight back and slow the bay down
- Lifting heavy wheels by hand causes back injury and lost technician days
- Inconsistent mounting head clearance damages rim flanges over time
Technical Features
- Fully automatic operation without turntable or crowbar
- Automatic adjustment with double locking device for mounting head to rim gap
- Maximum mounting and dismounting size up to 24 inches
- Assistant arm for low profile and run-proof tyres
- Hand-controlled pneumatic tyre shovel
- Pneumatic tyre lifting system for heavy-duty tyres
- Mounting head made of special alloys with life-time free service
Specifications
Compared With Other Models
- Against a turntable machine: the wheel is held without clamping jaws on the rim, so there is nothing to mark the bead seat
- Against the ATC860S: the ATC880S removes the crowbar step entirely rather than assisting it
- Against manual bar work: sidewall and rim damage on premium wheels drops sharply
Use Guide
- Connect shop air and check the working pressure before the first wheel
- Load the wheel using the pneumatic lifting system rather than lifting by hand
- Let the mounting head set and lock its own gap to the rim
- Use the assistant arm on low profile and run-flat tyres, then inflate and balance
Quality and Support
What Comes With the Machine
Quality Assurance
Every product is supplied with a long warranty assurance.
Expert Guidance
Pre-sales and after-sales teams give professional guidance and aftersales support.
Reliability
Consistent and reliable performance across every product line.
Innovation
An experienced R&D team develops the products the market asks for.
Customization. Machines are built to your local voltage and frequency, and optional equipment is listed on the quotation. Send us your requirement and we will confirm what can be changed before you order.
Bay Solutions Using This Machine
ATC880S Questions Buyers Ask
What is the largest wheel it can handle?
Mounting and dismounting is rated up to 24 inches.
Why is there no turntable?
Removing the turntable and the crowbar takes the lever and clamping forces off the rim, which is what protects alloy and painted wheels.
Does it handle run-flat tyres?
Yes. The assistant arm is there specifically for low profile and run-proof tyres.
What air supply is required?
It uses shop compressed air for the tyre shovel and the lifting system. Send us your compressor rating and we will confirm suitability before you order.
What support comes with the mounting head?
The mounting head is made of special alloys and is covered by life-time free service.
How is the machine packed for sea freight?
Machines ship crated for container loading. We confirm crate dimensions, gross weight and units per container with the quotation.
Related Products
Tilting Column
ATC860S Tire Changer with Tire Lifting System
Tilting column changer with pneumatic wheel lift
Tilting Column
ATC850 Tire Changer with Pneumatic Tire Shovel
Tilting column changer ready for a later upgrade
Tilting Column
ATC831S Tire Changer with Tire Lifter
Tilting column changer with lifter and assistant arm
Related Guides
How to Choose a Tyre Changer for Your Wheel Mix
Assistant arm, tyre lifter, leverless. Each answers a different problem, and the right answer comes from the wheels you actually handle rather than the machine specification sheet.
Download the Catalogue
Tyre Maintenance Catalog 2024 V1.1
Tyre changers, wheel balancers and wheel aligners across the ATC, AWB and WA ranges.
Download PDF (5415 KB)Request a Quotation for the ATC880S
Tell us the quantity, your local voltage and the destination port and we will send a price with crate dimensions and lead time.