An S hook in SUS 304 stainless steel for hanging in kitchens, wet rooms, outdoors and food-adjacent areas. It is the default choice whenever a hook will be in permanent contact with moisture and a plated hook would be a recurring replacement.
Corrosion resistance in the material rather than in a coating, so a scratch during installation does not start a rust site.
Kitchens and food handling areas are cleaned with water and detergent constantly, which plated hooks do not tolerate.
Each end is sized for what it engages rather than made to a generic opening.
Keep stainless hooks away from carbon steel tooling and swarf during installation. Embedded steel particles produce rust spots that look like a material failure but are surface contamination.
Plated hooks rusting within months in kitchens and wet rooms
Rust marks on walls and rails below hanging hardware
Dimensional and load figures are set per order against your drawing or sample, so they are marked TBC rather than filled with catalogue numbers.
| Product Type | Spring Hooks |
|---|---|
| Raw Material Options | Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire |
| Wire Diameter Range | 0.1-8 mm |
| Surface Treatment Options | Zinc plating, Nickel plating, Silver plating, Gold plating, Tin plating, Galvanizing in various colours, Dacromet, Black oxide, Phosphating |
| Standard | ISO, non-standard and OEM drawings |
| Processing Route | Material sourcing → Coiling and forming → Heat treatment → Surface treatment → Quality inspection → Packing → Shipping |
| Inspection Equipment | Grinding and shot peening machinery; Precision tensile strength testers; Magnetic powder flaw detectors |
| Packing | Plastic bags, cartons or pallets, or packing to your own specification |
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, 30% deposit before production, 70% balance before shipment |
| Lead Time | 7-15 days after the order is confirmed |
| Minimum Order Quantity | Quoted per part — tell us your requirement (TBC) |
| Dimensions and Load Rating | Made to your drawing or sample (TBC per part) |
Every batch follows the same seven step route, with tensile testing and magnetic powder flaw detection carried out before packing.
Available in Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire, in wire from 0.1-8 mm, with any of our nine surface finishing routes. Geometry, end treatment and finish are all specified per order.
ISO 9001, SGS certificate and RoHS report (stated on the legacy site, certificates pending re-confirmation). Certificate copies are sent on request once re-confirmed.
Against galvanised hooks, stainless costs more and does not depend on an intact coating. In permanently wet positions the cost difference is recovered in the first replacement avoided.
For most coastal use, yes. Where salt spray hits the part directly, raise the grade question with us first.
Stainless does not rust in normal service, though it can show water marks. A polished finish is easier to keep looking clean.
Yes. Where a rail carries several hooks, producing them in one run keeps the appearance consistent.
Send your drawing, dimensions or a sample. We will confirm the specification and come back with a price and a lead time.
