How to Choose the Right Size for a Garden Sculpture
The single most common regret is a piece that is too small. Here is how to get the scale right before anything is fabricated.
Garden Decoration Sculpture
Stainless Steel Mirror Stone Table and Chairs Sculpture
Stainless Steel Mirror Stone Table and Chairs Sculpture is a mirror polished stainless steel seating sculpture built to order in our Shenzhen workshop.
Product Overview
What This Piece Is
Stainless Steel Mirror Stone Table and Chairs Sculpture is a mirror polished stainless steel seating sculpture built to order in our Shenzhen workshop.
A sculpture that people can sit on earns its floor area twice, which matters in transport halls and mall atriums where space is charged.
Stainless steel is the workhorse of outdoor sculpture because it carries its own corrosion resistance instead of relying on a coating.
The minimum order is one piece, the size is set by your drawing rather than by a catalogue.
Stainless Steel Mirror Stone Table and Chairs Sculpture view 2
Key Benefits
Why Buyers Specify This Piece
- Fabricated in stainless steel, so the surface you approve is the surface that stays, with no paint film to fail.
- The mirror polished surface picks up sky, planting and passing people, so the piece changes through the day instead of reading as one fixed object.
- Height, width and base detail for this seating sculpture are set from your drawing, so it is proportioned to the space instead of being the nearest standard size.
- One seating sculpture is a full order. A single project in gardens and courtyards does not have to wait for a container quantity.
- A sculpture that people can sit on earns its floor area twice, which matters in transport halls and mall atriums where space is charged.
- The crate is built around the finished geometry of this seating sculpture, with foam contact on every mirror polished face.
- Because the stainless steel is worked and finished in the same building, one team owns the surface from the first cut to the last pass.
Application Scenarios
Where It Is Installed
Set on a lawn, in a planting bed or on a courtyard paving grid, on a concrete pad or a levelled base plate.
Installed in a park, on a plaza or at a landscape entrance, where the piece has to survive public contact and read from a distance.
Placed in a hotel lobby, on an arrival axis or beside a reception desk, where it is the first object a guest registers.
Used in a mall atrium, a retail entrance or a showroom, as a fixed point that shoppers photograph and navigate by.
Who It Is For
The People Who Order This
- Interior designers who need one seating sculpture to carry a room rather than a wall of small decoration
- Property developers placing a stainless steel seating sculpture in parks and public plazas to anchor an arrival point
- Hotel and hospitality groups adding a seating sculpture to gardens and courtyards without closing the space for a refurbishment
- Public art planners and municipal teams siting a seating sculpture in parks and public plazas where it will take public contact
Problems It Solves
What This Piece Removes From the Project
- Coated sculptures fade and flake where sun and rain hit hardest. Stainless steel removes that maintenance line from the budget.
- A poorly polished mirror surface shows the weld lines and a wavy reflection. Grinding the seams flat before polishing is what removes both.
- Getting a seating sculpture into gardens and courtyards is usually harder than the design assumed. Access is checked before the piece is built, not on delivery day.
- Off the shelf seating sculptures are never the size gardens and courtyards actually needs, so schemes end up compromised. Making this one to the drawing removes that compromise.
- Commissioning a single seating sculpture usually means a studio price and a studio lead time. Factory fabrication of one piece keeps both in range.
Technical Features
How It Is Constructed
- Seating height and depth set for public use with the load path carried into the base
- Mirror polished by hand through successive grits until the reflection is undistorted across the whole surface
- Fabricated throughout in stainless steel with matching filler where the material is welded
- Base plate and anchor pattern for the seating sculpture issued as a drawing before the foundation is poured
- Weld seams placed on the lines of the seating sculpture so they read as edges rather than repairs
Specifications
Recorded Specification
| Material | Stainless steel |
|---|---|
| Finish | Mirror polished |
| Form | Seating Sculpture |
| Category | Garden Decoration Sculpture |
| Size | Made to your drawing |
| Minimum Order | 1 piece |
| Placement | Quoted per project |
| Packing | Foam lined plywood crate built to the finished geometry |
| Origin | Shenzhen China |
Dimensions, weight and lead time for this seating sculpture are confirmed with the quotation, because it is built to your drawing rather than to a garden decoration sculpture catalogue size.
Materials
What It Is Made From
- Stainless steel
- Stainless or galvanised fixings sized for this seating sculpture and supplied with it
Manufacturing Process
How It Is Made
1
Cutting the sheet to the developed pattern
2
Forming and rolling each panel
3
Welding the panels into the finished form
4
Grinding and levelling the seams
5
Polishing or texturing to the specified finish
6
Cleaning and passivation before packing
Quality Control
What Is Checked and When
- Material checked against the order before cutting
- Seams inspected after grinding
- Surface reviewed under raking light
- Base plate and fixing points checked to the drawing
- Workshop trial assembly before crating
Customisation Options
What Can Be Changed
- Overall height, width and depth of the seating sculpture set from your drawing or from the dimensions of gardens and courtyards
- Finish changed between mirror, brushed and coloured coating on the same seating sculpture
- Base detail changed between a flush plate, a plinth and a direct planting bed fixing
- The seating sculpture split into transportable sections where access to gardens and courtyards is restricted
Comparison
How It Compares With the Alternatives
Compared with Cast stone or GRC
Cast stone reads heavy and chips on the edges. Stainless steel gives a thinner profile, a cleaner line and a surface that survives handling.
Compared with A general metal fabricator
A fabricator can weld a seating sculpture but rarely has the polishing capacity. On stainless steel the surface work is where the piece is won or lost.
Compared with A rented or temporary installation
Rental suits an event. For a permanent position in gardens and courtyards the cost of two or three rentals already covers a seating sculpture that stays.
Use Guide
Looking After It Once It Is Installed
- Rinse with clean water and dry with a soft cloth
- Neutral detergent for marks and fingerprints
- Keep iron filings and construction dust off the surface
- No abrasive pads on finished faces
- Fingerprints show on a mirror surface. A neutral detergent wash and a dry microfibre cloth is all it takes.
Related Products
Other Pieces in Garden Decoration Sculpture
Garden Decoration Sculpture
Outdoor Stainless Steel Sculpture Lawn Art Yard Sculpture
View details
Garden Decoration Sculpture
Red Yellow Outdoor Garden Park Yard Decoration
View details
Garden Decoration Sculpture
Outdoor Fountain with Light Garden Water Feature
View details
Garden Decoration Sculpture
Stainless Steel Metal Mirror Egg Ball Oval Ball
View detailsRelated Reading
Guides That Apply To This Piece
Design Guide
Installation Guide
Foundations and Fixings for Outdoor Sculpture
The base plate and the anchor pattern cause more delays on site than anything else. They are also the easiest part to get right in advance.
Design Guide
Planning a Sculptural Water Feature
Water turns a sculpture into a system. Decide the effect, the grade and the plant room before the form is finalised.
Frequently Asked Questions
Can this be made in a different size
Yes. Stainless Steel Mirror Stone Table and Chairs Sculpture is made to order, so the height and width are set from your drawing or from the dimensions of the space. Send the position and the height you have in mind and the quotation follows those figures.
What is the minimum order quantity
One piece. There is no container minimum, which is why single projects in gardens and courtyards are a normal part of the workload here.
Why stainless steel rather than something cheaper
Stainless steel is the workhorse of outdoor sculpture because it carries its own corrosion resistance instead of relying on a coating. Coated sculptures fade and flake where sun and rain hit hardest. Stainless steel removes that maintenance line from the budget.
Will the mirror finish show the welds
Not if the seams are ground level before polishing starts. Every weld on a mirror piece is dressed flat first, which is why the reflection stays undistorted across the joint.
How is a seating sculpture this size packed and shipped
A plywood crate is built around the finished geometry with foam on every mirror polished face. Large seating sculptures are split into sections at joints chosen during design, trial assembled in the workshop, then marked so they go back together in the same order on site.
What do you need from me to quote
The position, the height or overall size you want, and any drawing, render or reference photograph you already have. For gardens and courtyards a photograph of the space is often enough to start.
What is the lead time
Lead time depends on the size of the seating sculpture, the mirror polish and how much design work it needs, so it is confirmed with the quotation rather than promised in advance. Send the brief and the schedule comes back with the price.
Quote This Piece for Your Project
Send the position, the height you want and any drawing you have. The quotation comes back against your figures, not against a catalogue size.