Foundations and Fixings for Outdoor Sculpture
The base plate and the anchor pattern cause more delays on site than anything else. They are also the easiest part to get right in advance.
Garden Decoration Sculpture
Large Modern Outdoor Garden Decorative Metal Art Design A
Large Modern Outdoor Garden Decorative Metal Art Design A is a stainless steel botanical form built to order in our Shenzhen workshop.
Product Overview
What This Piece Is
Large Modern Outdoor Garden Decorative Metal Art Design A is a stainless steel botanical form built to order in our Shenzhen workshop.
Botanical forms tie a sculpture into planting, so the piece belongs in the landscape rather than being dropped into it.
Stainless steel is the workhorse of outdoor sculpture because it carries its own corrosion resistance instead of relying on a coating.
The minimum order is one piece, the size is set by your drawing rather than by a catalogue.
Large Modern Outdoor Garden Decorative Metal Art Design A produced by Xinhengda Sculpture in Shenzhen
Key Benefits
Why Buyers Specify This Piece
- Fabricated in stainless steel, so the surface you approve is the surface that stays, with no paint film to fail.
- Height, width and base detail for this botanical form are set from your drawing, so it is proportioned to the space instead of being the nearest standard size.
- One botanical form is a full order. A single project in gardens and courtyards does not have to wait for a container quantity.
- At large scale this botanical form is trial assembled in the workshop, then split into transportable sections with the joints placed where they will not be seen.
- Botanical forms tie a sculpture into planting, so the piece belongs in the landscape rather than being dropped into it.
- The crate is built around the finished geometry of this botanical form, with foam contact on every finished face.
- Because the stainless steel is worked and finished in the same building, one team owns the surface from the first cut to the last pass.
Application Scenarios
Where It Is Installed
Set on a lawn, in a planting bed or on a courtyard paving grid, on a concrete pad or a levelled base plate.
Who It Is For
The People Who Order This
- Galleries and trade buyers reselling stainless steel botanical forms into their own local projects
- Main contractors who need the botanical form, the base plate and the crate quoted as one package
- Private clients commissioning a single finished botanical form for gardens and courtyards
- Architects matching a botanical form to a material palette that already uses stainless steel
Problems It Solves
What This Piece Removes From the Project
- Coated sculptures fade and flake where sun and rain hit hardest. Stainless steel removes that maintenance line from the budget.
- Getting a botanical form into gardens and courtyards is usually harder than the design assumed. Access is checked before the piece is built, not on delivery day.
- Off the shelf botanical forms are never the size gardens and courtyards actually needs, so schemes end up compromised. Making this one to the drawing removes that compromise.
- Commissioning a single botanical form usually means a studio price and a studio lead time. Factory fabrication of one piece keeps both in range.
Technical Features
How It Is Constructed
- Multiple element assembly with each stem or leaf located from the same base
- Fabricated throughout in stainless steel with matching filler where the material is welded
- Edges and arrises detailed for the contact a botanical form gets in gardens and courtyards
- Internal frame sized to this botanical form rather than taken from a standard section list
Specifications
Recorded Specification
| Material | Stainless steel |
|---|---|
| Form | Botanical Form |
| Category | Garden Decoration Sculpture |
| Size | Made to your drawing |
| Minimum Order | 1 piece |
| Placement | Outdoor |
| Packing | Foam lined plywood crate built to the finished geometry |
| Origin | Shenzhen China |
Dimensions, weight and lead time for this botanical form are confirmed with the quotation, because it is built to your drawing rather than to a garden decoration sculpture catalogue size.
Materials
What It Is Made From
- Stainless steel
- Stainless or galvanised fixings sized for this botanical form and supplied with it
Manufacturing Process
How It Is Made
1
Cutting the sheet to the developed pattern
2
Forming and rolling each panel
3
Welding the panels into the finished form
4
Grinding and levelling the seams
5
Polishing or texturing to the specified finish
6
Cleaning and passivation before packing
Quality Control
What Is Checked and When
- Material checked against the order before cutting
- Seams inspected after grinding
- Surface reviewed under raking light
- Base plate and fixing points checked to the drawing
- Workshop trial assembly before crating
Customisation Options
What Can Be Changed
- Overall height, width and depth of the botanical form set from your drawing or from the dimensions of gardens and courtyards
- Lighting designed into the botanical form with the cable route concealed
- Your own branding applied to the botanical form for resale as OEM or ODM work
- The stainless steel grade stepped up where the piece is going within reach of salt or treated water
Comparison
How It Compares With the Alternatives
Compared with Cast stone or GRC
Cast stone reads heavy and chips on the edges. Stainless steel gives a thinner profile, a cleaner line and a surface that survives handling.
Compared with A general metal fabricator
A fabricator can weld a botanical form but rarely has the polishing capacity. On stainless steel the surface work is where the piece is won or lost.
Compared with A rented or temporary installation
Rental suits an event. For a permanent position in gardens and courtyards the cost of two or three rentals already covers a botanical form that stays.
Use Guide
Looking After It Once It Is Installed
- Rinse with clean water and dry with a soft cloth
- Neutral detergent for marks and fingerprints
- Keep iron filings and construction dust off the surface
- No abrasive pads on finished faces
Related Products
Other Pieces in Garden Decoration Sculpture
Water Drop Sculpture
Stainless Steel Water Drop Sculpture Decoration Design A
View details
Garden Decoration Sculpture
Stainless Steel Angel Girl Sculpture
View details
Garden Decoration Sculpture
Stainless Steel Parisian Dancing Girl Sculpture
View details
Garden Decoration Sculpture
Large Modern Outdoor Garden Decorative Metal Art Abstract Sphere
View detailsRelated Reading
Guides That Apply To This Piece
Installation Guide
Design Guide
Planning a Sculptural Water Feature
Water turns a sculpture into a system. Decide the effect, the grade and the plant room before the form is finalised.
Design Guide
How to Choose the Right Size for a Garden Sculpture
The single most common regret is a piece that is too small. Here is how to get the scale right before anything is fabricated.
Frequently Asked Questions
Can this be made in a different size
Yes. Large Modern Outdoor Garden Decorative Metal Art Design A is made to order, so the height and width are set from your drawing or from the dimensions of the space. Send the position and the height you have in mind and the quotation follows those figures.
What is the minimum order quantity
One piece. There is no container minimum, which is why single projects in gardens and courtyards are a normal part of the workload here.
Why stainless steel rather than something cheaper
Stainless steel is the workhorse of outdoor sculpture because it carries its own corrosion resistance instead of relying on a coating. Coated sculptures fade and flake where sun and rain hit hardest. Stainless steel removes that maintenance line from the budget.
How is a botanical form this size packed and shipped
A plywood crate is built around the finished geometry with foam on every finished face. Large botanical forms are split into sections at joints chosen during design, trial assembled in the workshop, then marked so they go back together in the same order on site.
What do you need from me to quote
The position, the height or overall size you want, and any drawing, render or reference photograph you already have. For gardens and courtyards a photograph of the space is often enough to start.
What is the lead time
Lead time depends on the size of the botanical form, the surface finish and how much design work it needs, so it is confirmed with the quotation rather than promised in advance. Send the brief and the schedule comes back with the price.
Quote This Piece for Your Project
Send the position, the height you want and any drawing you have. The quotation comes back against your figures, not against a catalogue size.