Skip to content
Weiye Webbing Ltd · Foshan China · Since 1996

Browse

HomeAll Products Order StoriesKnowledge Centre DownloadsAbout ContactQuestions Buyers Ask

Product Range

Polyester Webbing (27)Polypropylene Webbing (28)Jacquard Webbing (26)Cotton Webbing (10)Elastic Webbing (11)Cord and String (9)Silk Printed Webbing (3)Book Head and Tail Bands (37)

Industries

Outdoor Gear and BackpacksSafety and Protective EquipmentAutomotive InteriorsBookbinding and PrintingFashion Packaging and GiftPet Products and Accessories

Capabilities

Custom Jacquard Logo WebbingPantone Colour Matching and Shade ControlSilk Screen Printing on WebbingOEM and Private Label Programme
Capability

Pantone Colour Matching and Shade Control

Colour agreed on woven material before the bulk lot runs, then held across the whole order.

Pantone formula guides fanned out on the colour matching bench
Why This Matters

The Part Buyers Usually Find Out Too Late

Colour difference is the most common quality complaint in narrow fabric, and it is almost never one problem. It is inter-batch variation, end-to-end variation within a roll, side-to-centre shading on wide tape, face-to-back difference on plain and rib weaves, and yellowing in storage. Each has a different cause and a different control.

How It Actually Runs

Reference Agreed

A Pantone number or a physical swatch you post to us. A number travels better than a description and far better than a screen image.

Yarn Lot Check

Yarn lot numbers change dye absorption, and inconsistent yarn whiteness matters most when a light colour follows bleaching. We check the lot before matching rather than after.

Laboratory Match and Woven Sample

The formula is matched and woven, not just dipped. You approve material that has been through the same process as your production.

Dye Lot Reserved

One lot is reserved for the whole quantity. This removes inter-batch variation, which is the largest single cause of shade complaints.

In-Process Control

Dyeing temperature, duration and pH are held steady, and weighing of dyestuffs and auxiliaries is checked, because drift in any of them moves the shade.

Roll Inspection

Shade is checked at the start, middle and end of each roll, and across the width on wider tape where tension variation causes side-to-centre shading.

What You Get

  • Woven sample for written colour approval before bulk
  • One dye lot reserved across the full order quantity
  • Start, middle and end shade check on every roll
  • Colour reference archived for repeat orders
Pantone formula guides fanned out on the colour matching bench
Colour is agreed against a Pantone reference or a swatch you post to us, then proved on woven material before the bulk lot runs.
FAQ

Questions About Pantone Colour Matching and Shade Control

Why did our last supplier's webbing change shade mid-order

Most often inter-batch variation: different dyeing batches produce different shade depth or hue. Reserving one dye lot for the whole quantity is the direct fix, and it is what we do as standard.

What causes colour to differ between the edge and the centre of wide tape

Tension variation across the width during weaving changes fabric density and therefore dye uptake. Wide webbing is the most prone to it, which is why we check across the width and not only along the length.

Can you match to a physical sample rather than a Pantone number

Yes. Post us the swatch. We will match to it and send a woven sample back for your written approval before the bulk lot is committed.

Start With Pantone Colour Matching and Shade Control

Send what you have, even if it is only a photograph of an old strap. We will tell you what is achievable before anything is committed.