Hospitality Floor Lamps
Guest-room and lounge floor lamps with documented stability, safety and dimensional testing.
What This Product Is And Who It Is For
A floor lamp is the one light fitting in a guest room that is not fixed to the building, which makes stability a safety question rather than a styling one. Songdom sources custom floor lamps for hotel guest rooms and public lounges and tests them as assemblies: base weight and footprint, tilt resistance, shade and diffuser fit, and cable management. The floor lamp package for Hotel Indigo Atlanta Vinings by IHG was inspected at assembly, tilt-tested and dimension-checked before shipment.
What You Get That You Would Not Get Direct
- Tilt testing on the finished assembly, not on a drawing assumption.
- Weighted bases specified for the actual shade size and arm reach.
- Shade and diffuser fit checked so the light output matches the mock-up room.
- Cable routing and switch position built to the guest-room layout.
Where It Is Installed
Guest-room reading positions
Suite and lounge corners
Lobby seating groups
Long-stay and branded residence living areas
The Teams That Buy This
- Hotel owners specifying loose lighting for guest rooms
- Designers who need a slim profile without a tipping risk
- Procurement companies consolidating loose and fixed lighting in one package
- Operators replacing floor lamps across an existing estate
What Goes Wrong And How We Stop It
Tipping risk
A tall lamp with a light base is a claim waiting to happen. We tilt-test the finished assembly at the factory.
Shade and diffuser mismatch
A diffuser that does not seat correctly changes the light output and shows the lamp source. It is checked on the assembled unit.
Cable hazards
Cord length and exit position are set to the room layout so the cable does not cross a walking line.
Finish inconsistency with the room package
Floor lamps are approved against the same finish sample as the table lamps and sconces in the same room.
How It Is Built
- Weighted base sized to the shade and arm geometry
- Shade and diffuser assemblies checked as a unit
- Foot switch, inline switch or body switch options
- Finish matched across the full guest-room lighting set
- Packed to survive container handling without base scuffing
Materials
Metal frames and weighted bases, fabric or acrylic shades with diffusers, and destination-market wiring components.
Specification Table
| Product type | Guest-room and public-area floor lamp |
|---|---|
| Base | Weighted, footprint sized to the assembly |
| Shade | Fabric or acrylic with diffuser, per approved drawing |
| Stability testing | Tilt test performed on the finished assembly |
| Electrical | Destination market voltage and plug standard |
| Certification | UL, ETL, CE or SAA depending on destination market |
| Finish | Matched to the approved guest-room lighting sample |
| Minimum order quantity | TBC — quoted per project |
| Lead time | TBC — confirmed against the opening date at quotation |
Items marked TBC are not published by Songdom and are confirmed per project rather than estimated here.
From Drawing To Packed Carton
- 1
Drawing review
- 2
Pre-production sample
- 3
Incoming material inspection
- 4
Assembly process inspection
- 5
Dimensional verification
- 6
Tilt and safety testing
- 7
Final inspection and packing
How This Product Is Inspected
The Hotel Indigo floor lamp package was inspected during the assembling process, measured against the drawing, tilt-tested for stability and safety-tested before final packing. Base, shade and diffuser were each photographed as part of the inspection record.
Certifications Available
What Can Be Changed
- Height and arm reach
- Base weight and footprint
- Shade and diffuser specification
- Switch type and position
- Cord length and exit
- Finish matched to the room set
Who Builds It
| Manufacturing partners | 4+ specialised hospitality lighting factories |
|---|---|
| Partner experience | 13–25 years in the hospitality lighting sector |
| Projects delivered by the network | 1,500 to 10,000+ per partner factory |
| Certifications held | UL, ETL, CE, SAA |
Three Ways To Buy This And What Each Costs You
| Stock floor lamp | Available immediately, but the proportions and finish rarely match the rest of the guest-room lighting set. |
|---|---|
| Custom without assembly testing | Looks correct in photographs. Stability and diffuser fit are only discovered once the rooms are dressed. |
| Songdom custom sourcing | Custom geometry with tilt, safety and dimensional testing recorded before shipment. |
How To Start
Send the floor lamp elevation with the intended room layout. We confirm the base weight and footprint needed for that geometry before the sample is built.
Real Production And Inspection Photographs
Every image below comes from a Songdom project or factory inspection.
Other Categories On The Same Package
LightingHospitality Table Lamps and Desk Lamps
Custom guest-room and public-area table lamps, inspected to the drawing before the carton is sealed.
View product
LightingHospitality Wall Sconces and Headboard Lighting
Headboard sconces, reading lights and corridor wall fittings built to brand standard.
View product
LightingHospitality Chandeliers and Pendant Lighting
Feature chandeliers and pendants for lobbies, restaurants and pre-function space.
View productWhere This Has Been Delivered
Read Before You Place The Order
Process GuideThe Six Inspection Gates Every Hotel FF&E Order Should Pass
What to inspect, when to inspect it, and why a final visual check is the weakest gate in the process.
Read article
Buying GuideHow to Find a Reliable Factory for Project FF&E
Eight questions that separate a factory that can deliver a hotel or airport package from one that can only quote for it.
Read articleHospitality Floor Lamps FAQ
Do you test floor lamps for stability?
Yes. A tilt test is performed on the finished assembly at the factory, together with dimensional verification and safety testing, before the lamp is packed.
Can the floor lamp match our table lamps and sconces?
Yes. Loose and fixed lighting for the same room set is approved against one physical finish sample so the family reads as one.
What switch types are available?
Foot switch, inline switch or body switch, specified per project and confirmed on the pre-production sample.
Which markets can you certify for?
Our lighting partners hold UL, ETL, CE and SAA, which covers North American, European and Australian project requirements.
How are floor lamps packed for sea freight?
They are packed to survive container handling without base scuffing, and packing is checked at the pre-shipment inspection.
Get A Quotation For Hospitality Floor Lamps
Send the schedule and drawings. We confirm the buildable specification, the certification route and the lead time against your opening date.