- Home
- Knowledge Center
- Choosing Grating For A Visible Floor

Choosing Grating For A Visible Floor
What changes when the grating is part of a finished surface that people look at rather than a working deck they walk over.
Surface Finish Becomes A Specification
On a working platform nobody notices a weld bead. In a hotel entrance or a food hall they do. That is the main reason press locked panels exist: a flush surface and no bead on any visible edge.
Mesh Geometry Reads From Every Angle
A square mesh made from equal bars in both directions reads as a pattern from any approach. An asymmetric mesh reads as stripes from the side, which is why architectural screening usually specifies equal sections.
Set Panels To The Building Grid
Panel joints that fall on paving joints or facade grid lines disappear. Panel joints that fall randomly are the first thing the eye finds.
Coating Is A Visual Decision Too
Hot-dip galvanizing weathers to a matt grey that sits well against stone and concrete. Where a colour is specified, paint belongs over galvanizing. Where brightness is wanted and the area is washed, stainless with passivation is the answer.
Fix It Down Before Someone Lifts It
Anything loose in a public area gets lifted eventually. Anti-lift fixings are fabricated with the panel rather than added afterwards.
Products Referenced In This Guide

Press Locked Grating 32x3 Carbon Steel
Hot-dip galvanized carbon steel press locked panel with 32x3 bearing bar and a matching 32x3 cross bar, giving a deep square mesh.
See the specification
Press Locked Grating 40x3 Stainless Steel
Stainless steel press locked panel on 40x3 bearing bar with a 10x2 cross bar, acid passivated, for platforms and visible runs with a flush top surface.
See the specification
Heel Guard Grating 30x2.5 Paving Slot Run
Narrow-slot heel guard panels on 30x2.5 bearing bar with 8x2 cross bar, hot-dip galvanized, set flush into stone or concrete paving.
See the specification
Press Locked Grating 30x2 Stainless Steel
Light stainless press locked panel with matched 30x2 bearing and cross bars, acid passivated, for hygienic floors and light-duty visible decks.
See the specificationProduct Families Covered
Questions About This Guide
Can grating be used as a facade screen?
Can panels be made to a facade module?
Put This Into Practice
Send the opening you are covering and a recommendation with the matching bar sections comes back by email.
