WB8601 Wheelbarrow
One wheel, one operator, loads that a two-wheel cart cannot turn in.
Published Specification
- ModelWB8601
- Load200
- Weight22
- Water Capacity102
- Sand Capacity7
- Wheel6.50-8
- L1520
Include the quantity, your destination port or market and your company name. Renwei states that enquiries are answered within 12 hours.
What This Model Is
The WB8601 is a wheelbarrow from the Qingdao Renwei catalogue. The wheel specification is 6.50-8. The source table lists its Load as 200 without a stated unit.
Every figure on this page is taken from the published Renwei specification for this model; nothing has been estimated to fill a gap.
What the Specification Tells a Buyer
Published rated load
The source table gives the Load column as 200 without stating a unit, so it is reproduced here exactly as published. It is a per-model figure from the source catalogue, not a range quoted for the whole series. Check it against your own site handling limit before specifying.
Wheel published as 6.50-8
The wheel size is published so a replacement can be matched exactly. The same wheel families are sold separately on this site, so spares match the machine.
Own weight published
The source table gives Weight as 22 without a unit; it is reproduced as published. Own weight decides whether one person can lift or load the unit.
Matched spares from the same catalogue
Wheels, casters and tubes are published here as their own models with their own specifications, so a worn part can be ordered by model number instead of described over email.
Full Published Specification
Every value below is taken from the Renwei catalogue entry for this model. Rows marked as not published are shown rather than hidden, so you know exactly which questions to ask.
| Model | WB8601 |
|---|---|
| Load | 200 |
| Weight | 22 |
| Water Capacity | 102 |
| Sand Capacity | 7 |
| Wheel | 6.50-8 |
| L | 1520 |
| H | 585 |
| C | 600 |
| A | 980 |
| B | 633 |
| h | 296 |
| QTY | Not published on the source site |
Reading this table
Body dimensions are given as the letters used on the source drawing: L is overall length, H overall height, C tray width, and A, B and h are the frame reference points on the same drawing.
How the WB8601 Compares Within the Family
Published Load for this model set against its neighbours in the Wheelbarrow family. Figures are as published; no model is shown with an estimated value.
| Model | Load |
|---|---|
| WB8601 | 200 |
| WB8802 | 160 |
| WB8808 | 160 |
| WB8600 | 200 |
| WB8602 | 200 |
What Is Published and What to Ask
The source catalogue publishes wheel and dimension data for this model but does not publish the frame or tray material. Ask for the material and coating specification against the model number before ordering.
Before you order
Minimum order quantity, lead time, payment terms, warranty and certifications are not published by Renwei. Ask for all five in writing against this model number before planning a shipment.
Getting the Best From This Model
- Load over the axle rather than at the far end, so the weight sits on the wheels instead of on the operator.
- Keep pneumatic wheels at the pressure marked on the tyre sidewall; an under-inflated wheel rolls badly and damages its own sidewall.
- Check wheel fixings after the first week of use and then periodically — most wheel failures start as a loose fixing.
- Check the rated load against what you actually intend to carry, and remember that dense material reaches the limit long before the body is full.
Industries and Applications
Construction and Contracting
Garden and Landscaping
Agriculture and Smallholdings
Solutions Relevant to This Model
Private Label and OEM
Container Load Planning
Wheel and Caster Matching
WB8601 Wheelbarrow Questions
What load is the WB8601 rated for?
The source table gives the Load column as 200 for this model without stating a unit, so it is reproduced exactly as published. It is a per-model figure, so use it rather than a figure quoted for the Wheelbarrow range as a whole.
Can I get replacement wheels for the WB8601?
This model is published with a wheel specification of 6.50-8. Matching wheels are sold as separate models on this site. Send that size together with your axle diameter and hub length and Renwei will confirm the match.
What is the minimum order quantity and lead time?
Neither is published on the source site, so neither is stated here. Send this model number with the quantity you are considering and ask for both in writing before you plan a shipment.
Are certificates or test reports available for the WB8601?
The source site publishes no certification list, so none is claimed on this page. Request the specific certificates your market requires and ask for them in writing before ordering.
Other Wheelbarrow Models
Technical Reading
Wheelbarrow Tray Capacity and Load Guide
Pneumatic vs Solid vs Foam Wheels
How to Read a Wheel Size
Quote the WB8601 Wheelbarrow
Send this model number with the quantity you need, your destination port or market, and your company name.