VXR-G2 X-Ray Food Inspection Machine
The VXR-G2 catches what a metal detector cannot: glass and ceramic down to 1.0 mm diameter alongside SUS304 balls at 0.3 mm and wires at 0.2 x 2 mm. A 210 W source works through a 0.4 mm detector over a 200 x 150 mm pass-through, at belt speeds from 10 to 60 m/min, in a full 304 stainless steel frame.
Key benefits
- Detects glass and ceramic at 1.0 mm diameter, not only metal
- SUS304 ball detection at 0.3 mm and wire at 0.2 x 2 mm
- 200 mm pass-through width and 150 mm height for a wide product range
- Belt speed adjustable from 10 to 60 m/min
- Full 304 stainless steel construction for hygiene and corrosion resistance
Problems it solves
- Metal detection is blind to glass, ceramic, stone and bone
- Fine stainless wire is the hardest contaminant to catch
- Line speed changes make a fixed-speed inspection point unworkable
- Non-stainless frames corrode under washdown
Who it is for
- Food safety managers whose hazard analysis includes glass and ceramic
- Processors who have reached the limit of metal detection
- QA teams needing stated detection figures for an audit
Application scenarios
- Food production where glass or ceramic breakage is a known risk
- Packed food lines needing a final foreign-object check
- Lines running mixed product formats at varying speeds
- Washdown environments requiring stainless construction
Technical features
- 210 W X-ray source
- 0.4 mm X-ray detector
- Adjustable conveyor speed
- Stainless steel 304 construction throughout
Specifications
| X-Ray Source | 210 W |
|---|---|
| Detector | 0.4 mm |
| Pass-Through Width | 200 mm |
| Pass-Through Height | 150 mm |
| Conveyor Speed | 10 to 60 m/min adjustable |
| Detection, SUS304 Ball | 0.3 mm diameter |
| Detection, SUS304 Wire | 0.2 x 2 mm |
| Detection, Glass Ball | 1.0 mm diameter |
| Detection, Ceramic Ball | 1.0 mm diameter |
| Construction | Stainless steel 304 |
| Power Supply | 220 V |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The FSD conveyor metal detectors are the cheaper answer where only metal matters. The VXR-G2 is what to specify once glass, ceramic or fine stainless wire enters the hazard analysis, because those are the contaminants a metal detector will never see.
Use guide
- Confirm the 200 x 150 mm pass-through clears your largest pack
- Set the belt between 10 and 60 m/min to match the upstream line
- Verify with SUS304, glass and ceramic test pieces at commissioning
- Re-verify at the interval set by your food safety plan
- Wash down as normal, construction is 304 stainless throughout
Product images
Where this product is used
Part of Industrial Metal Detectors for Food Processing ยท typically specified for:
Guides that cover this equipment
What Metals Can a Metal Detector Detect
Ferrous and non-ferrous metals behave differently in a detection field, and stainless steel is consistently the hardest to find.
Metal Detector or X-Ray for Food Inspection
The choice is decided by your hazard analysis and your packaging, not by budget. Each misses things the other catches.
VXR-G2 X-Ray Food Inspection Machine FAQ
Does it find glass and ceramic
Yes, glass and ceramic balls down to 1.0 mm diameter, alongside SUS304 balls at 0.3 mm.
What is the smallest metal it detects
A 0.3 mm SUS304 ball or a 0.2 x 2 mm SUS304 wire.
What size product does it take
200 mm pass-through width and 150 mm height.
How fast can the belt run
10 to 60 m/min, adjustable.
What is it made of
Stainless steel 304 throughout, for durability, corrosion resistance and hygiene compliance.
What power does it need
220 V.
Can you supply test pieces with the machine
Yes. Ask us on WhatsApp for the test-piece set matched to your detection specification.
Quotation for the VXR-G2 X-Ray Food Inspection Machine
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.