AVG-FX-Mini Compact Food X-Ray Inspection System
The AVG-FX-Mini puts X-ray inspection on a QC bench instead of a production line. It needs under 1.0 square metre of bench area and a standard AC outlet, but runs the same AI detection algorithm as the production-line models, so a result from the lab matches what the line will see. Minimum ferrous detection is 0.3 mm or better through a 250 x 100 mm tunnel.
Key benefits
- Fits on a standard QC bench in under 1.0 square metre, no floor mounting
- Runs on a standard AC outlet with no special power infrastructure
- Same AI detection engine as the production-line models
- R&D mode gives high-resolution capture for product development and failure analysis
- Minimum ferrous detection of 0.3 mm or better
Problems it solves
- Bench testing on a different algorithm does not predict line behaviour
- A production-line X-ray system will not fit or power in a lab
- Small batches do not justify floor-mounted inspection equipment
- Failure analysis needs higher resolution than production settings give
Who it is for
- QC laboratories that need line-equivalent results on bench samples
- Product developers testing packaging before a line trial
- Small producers who cannot justify a full production-line system
Application scenarios
- R&D laboratory testing of new product and packaging formats
- QC departments verifying samples pulled from the line
- Small-batch artisan producers below full line throughput
- Product development and failure analysis on returned goods
Technical features
- 60 to 80 kV adjustable tube under 0.4 kW
- 0.4 mm pixel pitch image resolution
- 12-inch touchscreen
- SUS304 stainless housing rated IP54
- Optional compact reject drawer for small-batch sorting
Specifications
| X-Ray Tube | 60 to 80 kV adjustable |
|---|---|
| Tube Power | under 0.4 kW |
| Tunnel Size | 250 x 100 mm |
| Belt Width | 250 mm |
| Belt Speed | 5 to 30 m/min |
| Minimum Detection (Fe) | 0.3 mm or better |
| Image Resolution | 0.4 mm pixel pitch |
| Display | 12-inch touchscreen |
| Housing | SUS304 stainless, IP54 |
| Footprint | under 1.0 square metre bench area |
| Power Supply | AC 220 V, 50 to 60 Hz, 0.8 kVA |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Customisation options
- Optional reject slot for small-batch sorting
Compared with other models in the range
The AVG-FX-400 is the line version of the same platform at 400 x 150 mm tunnel and 60 m/min. The Mini trades belt width and speed for a bench footprint and an ordinary socket, while keeping the same detection algorithm so results carry across.
Use guide
- Place on a QC bench with at least 1.0 square metre clear and plug into AC 220 V
- Set the tube between 60 and 80 kV for the product density
- Run belt speed between 5 and 30 m/min to match how the sample is presented
- Switch to R&D mode for high-resolution capture during development work
- Fit the reject drawer if small batches are sorted at the bench
Where this product is used
Part of Food X-Ray Inspection Systems ยท typically specified for:
AVG-FX-Mini Compact Food X-Ray Inspection System FAQ
How small a metal fragment will it find
0.3 mm or better for ferrous contaminants.
Will lab results match the production line
The detection algorithm is identical to the production-line models, which is the point of the design.
Does it need special power
No. AC 220 V at 50 to 60 Hz and 0.8 kVA from a standard outlet.
How much bench space does it need
Under 1.0 square metre, with a 250 x 100 mm tunnel.
Can it reject product
An optional compact reject slot is available for small-batch sorting.
Can it be cleaned down
The housing is SUS304 stainless rated IP54.
Quotation for the AVG-FX-Mini Compact Food X-Ray Inspection System
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.