VD2003 Handheld Metal Detector Pinpointer
The VD2003 is a static pinpointer: it detects without needing to be moved, which is what lets it find the exact position of a target in a dug hole rather than somewhere in the general area. Pinpointing is within 1.5 inches of the probe tip. It runs at 6.8 kHz from one 9 V battery, draws 0.03 A, and weighs 74 g at 25.5 x 4.3 x 3.5 cm.
Key benefits
- Static operation, no motion required to detect
- Pinpoints within 1.5 inches of the probe tip
- Used alongside a main detector to find the exact target location
- 74 g and 25.5 cm long, carried on a belt
- One 9 V battery, drawing only 0.03 A
Problems it solves
- A full-size coil cannot locate a target once the hole is open
- Motion-required detectors are useless at close range
- Digging a wide hole to find a small target damages the site
- Heavier pinpointers are awkward to carry all day
Who it is for
- Detectorists losing time finding targets in loose soil
- Professionals needing a low-cost daily tool
- Users wanting a backup detector on wiring and pipe work
Application scenarios
- Locating a target inside a dug hole
- Working alongside a full-size ground detector
- Detecting buried wires or pipes
- Daily use by professionals and hobbyists
Technical features
- Static operation with no motion required
- Precision pinpointing at the probe tip
- Scan and sweep operating modes
- Low current draw for long battery life
Specifications
| Power | 9 V battery |
|---|---|
| Operating Frequency | 6.8 kHz |
| Operating Current | 0.03 A |
| Operating Temperature | -5°C to 55°C |
| Pinpointing | within 1.5 inches at the probe tip |
| Operation | Static, no motion required |
| Gross Weight per Unit | 74 g |
| Size | 25.5 x 4.3 x 3.5 cm |
| Battery Life | approximately 10 hours |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The GC-2007 pinpointer adds LED, audio and vibrating indications with a built-in flashlight at 3.5 to 4 cm on a US quarter. The VD2003 is the simpler static probe at 74 g, focused on pinpointing within 1.5 inches of the tip.
Use guide
- Use a full-size detector to find the general target area first
- Open the hole, then probe with the VD2003 to locate the exact position
- Rely on static operation, the probe does not need to be swept
- Work within 1.5 inches of the tip for accurate pinpointing
- Operate between -5°C and 55°C
Where this product is used
Part of Metal Detector Pinpointers.
VD2003 Handheld Metal Detector Pinpointer FAQ
Does it need to be moved to detect
No. Static operation means no motion is required.
How precise is the pinpointing
Within 1.5 inches at the probe tip.
What battery does it take
One 9 V battery, drawing 0.03 A, giving approximately 10 hours.
How heavy and how long is it
74 g at 25.5 x 4.3 x 3.5 cm.
Can it replace a main detector
No. It is designed to be used side by side with a metal detector to pinpoint exact locations.
What temperature range does it tolerate
-5°C to 55°C.
Quotation for the VD2003 Handheld Metal Detector Pinpointer
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.