GC-2005 Pinpointing Metal Detector
The GC-2005 shows how close you are to a target rather than just that one exists: a first green LED lights on detection, then a second and third as the probe approaches, with sound and vibration throughout. It runs a flashlight continuously, initialises in about 2 seconds, and suspends detection after about 10 seconds on the same target to save battery, recovering after about 1 second.
Key benefits
- Three-stage LED indication showing how close the probe is to the target
- Sound and vibration alongside the LED sequence
- Flashlight stays lit during operation for working in a dug hole
- Automatic power saving after about 10 seconds on the same target
- Ready to use about 2 seconds after switch-on
Problems it solves
- A single-stage alarm gives no sense of how close the target is
- Continuous alarming over one target drains the battery
- A dug hole is too dark to search by eye
- Loose soil hides small targets after digging
Who it is for
- Detectorists who want proximity feedback, not just a yes or no
- Users working across sand, lawn and soil in one session
- Buyers wanting a compact probe with a built-in light
Application scenarios
- Indoor searching, sand, lawn and soil
- Coin, gold, silver, relic and jewellery recovery
- Pinpointing after a general detector search
- Working in a dug hole where a light is needed
Technical features
- Three green LEDs indicating progressive proximity
- Simultaneous beeping and vibration
- Built-in flashlight, lit throughout operation
- Automatic detection suspend and recovery for power saving
- Single POWER ON/OFF button
Specifications
| Indication | Three-stage LED, sound and vibration |
|---|---|
| Flashlight | Built in, lit during operation |
| Initialisation Time | approximately 2 seconds |
| Power Saving | suspends after about 10 seconds on the same target, recovers after about 1 second |
| Controls | Single POWER ON/OFF button |
| Water Resistance | Not waterproof, cannot be used in water |
| Targets | Coins, gold, silver, relics and jewellery |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Compared with other models in the range
The HS-08, HS-11 and HS-12 probes are IP68 rated and can be used in water. The GC-2005 is not waterproof, but it gives three-stage proximity indication and keeps a flashlight lit throughout, which makes it the better dry-ground probe.
Use guide
- Press POWER and hold the probe still, away from metal, for about 2 seconds while it initialises
- Approach the target and watch the LEDs light in sequence as you get closer
- Expect detection to suspend after about 10 seconds over one target, recovering after about 1 second
- Use the flashlight, which stays lit, when searching inside a hole
- Do not immerse, this probe is not waterproof
Where this product is used
Part of Metal Detector Pinpointers.
GC-2005 Pinpointing Metal Detector FAQ
How do I know I am getting closer to the target
The first green LED lights on detection, then the second and third as you approach, with continuous beeping and vibration.
Can it be used in water
No. It is not waterproof and cannot be used in water. For wet use, ask us about the IP68-rated HS series.
Why does it stop alarming over a target
It suspends detection after about 10 seconds on the same target to save battery, and recovers for a new target after about 1 second.
How long does it take to be ready
About 2 seconds from switch-on, during which it should be held still and away from metal.
Does it have a light
Yes, the flashlight stays lit during operation.
Where can it be used
Indoors, and on sand, lawn and soil.
Quotation for the GC-2005 Pinpointing Metal Detector
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.