LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Twisted Telephone Cable — Telephone Cable manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Telephone Cable

Twisted Telephone Cable

AVS 2*0.5mm oxygen free copper conductor pvc insulation voice jumper cable telephone wire

This is the bare copper specification in the LANP Telephone Cable range. As catalogued by the factory: AVS 2*0.5mm oxygen free copper conductor pvc insulation voice jumper cable telephone wire.

It is supplied with a PVC jacket. Order quantities start at 100 m for evaluation and scale to 50,000 m per run, at a typical bulk lead time of 3-7 days.

CategoryTelephone Cable
Conductorbare copper
JacketPVC
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

Twisted Telephone Cable uses a bare copper conductor, so loop resistance stays where the telephone cable specification says it should be instead of climbing with run length.

OEM Branding Available

From 1 km we print your brand on Twisted Telephone Cable rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Every Twisted Telephone Cable batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for Twisted Telephone Cable. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameTwisted Telephone Cable
CategoryTelephone Cable
Conductor Materialbare copper
Conductor Diameter0.5 mm
Jacket MaterialPVC
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Manufactured on the LANP telephone cable line in Jieyang, China
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper
  • Jacket: PVC

Who It Is For

  • Telecom engineers doing installation and fault work
  • Building maintenance teams extending voice points
  • Door entry installers using low-core signal runs
  • Distributors stocking the voice accessory range

Problems It Solves

  • Drop wire stretching and failing at the termination point
  • Flat cable used for an external run where it will not last
  • Jumper wire too thick to dress neatly on a frame
  • Core count that does not match an existing socket wiring scheme

Application Scenarios

  • Extension runs from socket to handset
  • Modular leads inside offices and homes
  • Pole-to-building drops on copper networks
  • MDF and cabinet jumpering
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design
Use Guide

Installing It Without Losing Performance

  • Keep the Twisted Telephone Cable pair code consistent through every joint and frame, and write the allocation down.
  • A short service loop on Twisted Telephone Cable at each end is the cheapest insurance against future re-work.
  • Before committing volume on Twisted Telephone Cable, take a sample reel and verify it on your own site.

Before a first bulk order of Twisted Telephone Cable: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Telephone Cable Range

See all 8 telephone cable products →

Telephone Cable2 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

2 Wire Telephone Cable

voice and data round 2 wire telephone cable solid bare copper white

White
View specification →
Telephone Cable2C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

2C Flat Telephone Cable

Flat Telephone Wire Cable Lead 2 Pin for ADSL DSL Router Modem Phone Cable

2 core
View specification →
Telephone Cable4 Wire Telephone Cable — Telephone Cable manufactured by LANP CABLE

4 Wire Telephone Cable

Internal 4 Core Telephone Wire Cable HYA 4x0.5mm Solid Copper White 100M

4 coreWhite
View specification →
Telephone Cable4C Flat Telephone Cable — Telephone Cable manufactured by LANP CABLE

4C Flat Telephone Cable

28 AWG Copper Core 4 Conductor Flat Modular Line Telephone Cord Cable

28 AWG4 core
View specification →

Related guides

Questions

Twisted Telephone Cable — Questions

Is the conductor in Twisted Telephone Cable really bare copper?

Yes — bare copper throughout. Strip a core from any Twisted Telephone Cable drum and the cut end is copper all the way through, with no aluminium centre.

What packing formats are available for Twisted Telephone Cable?

Packing for Twisted Telephone Cable is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can you print our brand on Twisted Telephone Cable?

From 1 km we extrude your brand onto the Twisted Telephone Cable jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for Twisted Telephone Cable?

Twisted Telephone Cable is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Request pricing on Twisted Telephone Cable

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue