LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
H07V-U Black — Single Core Wire manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Single Core Wire

H07V-U Black

single core electric installation wire and cable 0.5 0.75 1.0 1.5 2.5 4 6mm

This is the copper specification in the LANP Single Core Wire range. The original specification reads: single core electric installation wire and cable 0.5 0.75 1.0 1.5 2.5 4 6mm.

It is supplied in Black. It is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

CategorySingle Core Wire
ColourBlack
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Black Jacket

The black jacket on H07V-U Black is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

OEM Branding Available

From 1 km we print your brand on H07V-U Black rather than putting a sticker on the carton. Packaging design support comes with it.

Tested Before It Ships

Testing on H07V-U Black happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for H07V-U Black. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameH07V-U Black
CategorySingle Core Wire
Jacket ColourBlack
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Manufactured on the LANP single core wire line in Jieyang, China
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Electrical contractors on fixed installation work
  • Panel builders wiring control cabinets with flexible cores
  • Electrical wholesalers stocking a full colour and size ladder
  • Export buyers matching a specific national colour code

Problems It Solves

  • Conductor cross-section under the printed rating
  • Insulation dragging or tearing during long conduit pulls
  • Colour codes that do not match local wiring regulations
  • Coils running short of the marked length

Application Scenarios

  • First-fix conduit and trunking wiring
  • Distribution board tails and final circuits
  • Lighting circuits and switch drops
  • Earthing and bonding conductors
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • Wstlab CE certification covering 2-core to 22-core power cable at AC450/750 V, 21 A
  • RoHS compliance under EC Council Directive 2011/65/EU
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
H07V-K BlueElectrically the same build in a different jacket colour — black here against blue. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
H07V-K GreenElectrically the same build in a different jacket colour — black here against green. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
Use Guide

Installing It Without Losing Performance

  • Verify the rating printed along H07V-U Black against your schedule at delivery. It is the cheapest check in the whole installation.
  • Use cable lubricant on long conduit runs of H07V-U Black instead of increasing pull force.
  • Colour identification on H07V-U Black is black. Getting the code wrong is a re-wire, not a snag.

Before a first bulk order of H07V-U Black: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Single Core Wire Range

See all 16 single core wire products →

Single Core WireH07V-K Black — Single Core Wire manufactured by LANP CABLE

H07V-K Black

PVC Insulation Electrical Cable Single Stranded Copper 0.75 1 1.5 2.5 4 sqmm Control Signal Wire

Black
View specification →
Single Core WireH07V-K Blue — Single Core Wire manufactured by LANP CABLE

H07V-K Blue

Single Core Wire Conductor：1.5mm 2.5mm 4.0mm 6.0mm 10mm 16mm 25mm Conductor material :Copper…

Blue
View specification →
Single Core WireH07V-K Green — Single Core Wire manufactured by LANP CABLE

H07V-K Green

Building Electric Wire for Automotive Stranded Hook Up Wire Cable Car Audio Flexible and…

Green
View specification →
Single Core WireH07V-K Green-yellow — Single Core Wire manufactured by LANP CABLE

H07V-K Green-yellow

Flexible Stranded PVC Insulated Electronic Installation and Lighting Wires

Green
View specification →

Related guides

Where it is installed

Questions

H07V-U Black — Questions

What packing formats are available for H07V-U Black?

Reel, coil and carton formats are all set per order for H07V-U Black. Tell us how it will be handled on site and we will match the packing to that.

Can H07V-U Black be supplied in another jacket colour?

The stocked jacket on H07V-U Black is black. If your market uses a different identification code, set it with the order alongside the print text.

What is the minimum order and lead time for H07V-U Black?

H07V-U Black starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

What certification covers H07V-U Black?

H07V-U Black falls under our Wstlab CE certificate for power cable at AC450/750 V, 21 A, and RoHS under EC Council Directive 2011/65/EU.

Request pricing on H07V-U Black

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue