LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
H07V-U Red — Single Core Wire manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

Single Core Wire

H07V-U Red

Insulated Copper wire cable solid conductor 1.5mm2

H07V-U Red sits in the LANP Single Core Wire range as a solid build. The factory specification for this line reads: Insulated Copper wire cable solid conductor 1.5mm2.

It is supplied in Red. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategorySingle Core Wire
ColourRed
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Red Jacket

H07V-U Red is catalogued in red, which is how most sites keep this service separate from everything else sharing the same containment.

OEM Branding Available

Your brand can be extruded onto the H07V-U Red jacket from 1 km per specification, alongside the rating and length markers, with box artwork and reel labels to match.

Tested Before It Ships

Each production lot of H07V-U Red is measured before packing. That is how the second order matches the sample you approved on the first.

Technical Data

Specification Sheet

Values below are the factory specification for H07V-U Red. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameH07V-U Red
CategorySingle Core Wire
Conductor StructureSolid
Jacket ColourRed
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Solid conductor
  • Jacket printed with specification and rating as standard

Materials

  • Conductor and jacket materials confirmed per order against the line specification

Who It Is For

  • Electrical contractors on fixed installation work
  • Panel builders wiring control cabinets with flexible cores
  • Electrical wholesalers stocking a full colour and size ladder
  • Export buyers matching a specific national colour code

Problems It Solves

  • Conductor cross-section under the printed rating
  • Insulation dragging or tearing during long conduit pulls
  • Colour codes that do not match local wiring regulations
  • Coils running short of the marked length

Application Scenarios

  • First-fix conduit and trunking wiring
  • Distribution board tails and final circuits
  • Lighting circuits and switch drops
  • Earthing and bonding conductors
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • Wstlab CE certification covering 2-core to 22-core power cable at AC450/750 V, 21 A
  • RoHS compliance under EC Council Directive 2011/65/EU
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
H07V-K BlackElectrically the same build in a different jacket colour — red here against black. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
H07V-K BlueElectrically the same build in a different jacket colour — red here against blue. Colour is how most sites separate services, so it is worth deciding before the order rather than after.
Use Guide

Installing It Without Losing Performance

  • Confirm that the marking on H07V-U Red matches the circuit schedule before pulling. Inspectors read the print on the insulation, not the delivery note.
  • Use cable lubricant on long conduit runs of H07V-U Red instead of increasing pull force.
  • Colour identification on H07V-U Red is red. Getting the code wrong is a re-wire, not a snag.

Before a first bulk order of H07V-U Red: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The Single Core Wire Range

See all 16 single core wire products →

Single Core WireH07V-K Black — Single Core Wire manufactured by LANP CABLE

H07V-K Black

PVC Insulation Electrical Cable Single Stranded Copper 0.75 1 1.5 2.5 4 sqmm Control Signal Wire

Black
View specification →
Single Core WireH07V-K Blue — Single Core Wire manufactured by LANP CABLE

H07V-K Blue

Single Core Wire Conductor：1.5mm 2.5mm 4.0mm 6.0mm 10mm 16mm 25mm Conductor material :Copper…

Blue
View specification →
Single Core WireH07V-K Green — Single Core Wire manufactured by LANP CABLE

H07V-K Green

Building Electric Wire for Automotive Stranded Hook Up Wire Cable Car Audio Flexible and…

Green
View specification →
Single Core WireH07V-K Green-yellow — Single Core Wire manufactured by LANP CABLE

H07V-K Green-yellow

Flexible Stranded PVC Insulated Electronic Installation and Lighting Wires

Green
View specification →

Related guides

Where it is installed

Questions

H07V-U Red — Questions

What packing formats are available for H07V-U Red?

Reel, coil and carton formats are all set per order for H07V-U Red. Tell us how it will be handled on site and we will match the packing to that.

Can H07V-U Red be supplied in another jacket colour?

H07V-U Red is catalogued in red. Other colours run on production orders, and colour is normally decided at the same time as the jacket print text.

What is the minimum order and lead time for H07V-U Red?

A trial reel of 100 m is enough to evaluate H07V-U Red. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

What certification covers H07V-U Red?

Wstlab CE certification for 2-core to 22-core power cable at AC450/750 V, 21 A, plus RoHS compliance under EC Council Directive 2011/65/EU. Both ship with the order.

Request pricing on H07V-U Red

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue